Used Swm Lathe for sale (5,435)

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff number: 8458.1120 Ibjdpfx Agow T Smhozjf Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter admitted over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter admitted over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, suitable for use with various collets and chucks using adaptation accessories. Collet accessories (SCHAUBLIN): B45/F48 Maximum bar capacity, diameter: 36 mm / 42 mm Automatic chuck, standard diameter: 170 mm Direct drive via AC motor, power at 100% / 50% duty: 15 / 18.5 kW Maximum torque at 100% / 50% duty: 135 / 165 Nm Maximum spindle speed: 5000 rpm C axis: Pneumatic clamping cylinder: 2700 daN Cross slide: Transverse travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Stepless working feeds, X/Z axes: 0–5000 mm/min Rapid traverse feeds, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 8 Standardized tool holder mounting: VDI 30 Max. tool shank size: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant system: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Unless otherwise specified, the above technical details are provided without commitment or liability.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3108833, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system Ijdpsx Ig Ausfx Agzjbf 3 jaw chuck 165mm diameter Collet chuck Hydrafeed MSV 65 magazine barfeed Parts catcher Hydraulic tailstock Swarf conveyor Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: good (used), Year of construction: 1990, functionality: fully functional, CNC Lathe YCM TC-2 Item number: 04-02-090 Manufacturer: YCM Good overall condition Workshop-tested machine Delivery time: Immediately – subject to prior sale Iodpfx Ajwfw Suogzebf Year of manufacture: approx. 1990 Dimensions (L x W x H): approx. 2400 x 1400 x 2100 mm Weight: approx. 3600 kg Control: Fanuc O-T Technical specifications: Swing over bed: approx. 480 mm Swing over cross slide: approx. 310 mm Spindle bore: approx. 52 mm Max. machining diameter: approx. 250 mm Distance between centers: approx. 550 mm Spindle speed range: approx. 110–3500 rpm Feed rate X-axis: approx. 10 m/min Feed rate Z-axis: approx. 15 m/min Turret: 8 stations Accessories: 3-jaw chuck Various tool holders Chip conveyor Machine leveling feet Documentation Live center Various chuck jaws Further accessories available on request. Price and additional technical details available upon request.

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Ibsdpfsx Dcbpjx Agzof Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Ibjdpfx Ajxz Dqgjgzof Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, rotational speed (max.): 5,000 rpm, controller model: Fanuc Series 0i Mate-TD, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter over tool turret: 70 mm Travel X: 352 mm Travel Z: 250 mm Tool stations: 8 Bar capacity: 42 mm Max. spindle speed: 5,000 rpm Iodpfx Agjx E Uzmjzsbf MACHINE DETAILS Control: Fanuc Series 0i Mate-TD EQUIPMENT Power chuck D135 mm Collet chuck 173E Parts catcher Chip conveyor

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 54 mm, turning diameter over bed slide: 390 mm, 3-jaw chuck digital read-out Ibodpex Evzbjfx Agzof Multifix tool holder device tail stock steady rest Technische Daten / technical details: Spitzenweite / center to center 765 mm Umlaufdurchmesser über Bett / rotary diameter over bed 390 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 240 mm Umlaufdurchmesser in der Kröpfung/ rotary diameter in the gap 580 mm Spindelbohrung / spindle hole 54 mm Drehzahlbereich 16-stufig / spindle speed 16-steps 25-2000 UpM /rpm Antriebsleistung / drive capacity 5,5 kW Gewicht der Maschine ca. / weight ca. 1300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. Iodpfx Agewmcx Aszobf *

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Ibedpfox Di Rqox Agzef Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 Ibjdpjx Id D Asfx Agzef FANUC touch control Specification: Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Iedoq T Rt Dspfx Agzobf Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret Ibodpfewnfzcox Agzjf 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity , Isdpfowq Inqox Agzebf machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, parts catcher, tool setter, tailstock

Condition: excellent (used), Year of construction: 2019, 460mm swing over bed, 270mm swing over cross slide, 1500mm Distance between Centres, Ibodpfow Naxqjx Agzjf 2200rpm spindle, 77mm Spindle Bore, 11kW spindle motor, FANUC OI-TD CNC control, Tailstock, 300mm 3 jaw chuck, coolant, 8 station turret, coolant

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor, Ijdpfx Agow Rct Hezobf

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, 584mm cutting length, 3,200rpm spindle speed, 102mm bar capacity, Iedpfx Asxugtksgzjbf 12 station turret, 4,000rpm milling speed, Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed .

Condition: excellent (used), Year of construction: 2018, Swing over carriage 355mm, Bar capacity 65mm, Maximum machining diameter 310mm, Maximum cutting length 521mm, Spindle speed 4,000 rpm, Ijdporztr Rsfx Agzjbf Milling speed 5,000rpm, C axis 0.001 degrees, spindle power 22/18.5 Kw, 12 station turret, Fanuc 32i control, swarf conveyor, tool setter , 3 jaw chuck

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, Ibodpjucdt Aefx Agzef 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 350mm, maximum machining length 1060mm, Ibodsxup Nbspfx Agzof bar capacity 65mm, spindle speed 5,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck.

Condition: excellent (used), Year of construction: 2020, Swing 533mm, 298mm max. machining diameter, 572mm cutting length, 3400rpm spindle, 76mm bar capacity, 12 station turret, Y axis -/+ 50.8mm, Ijdovygv Hspfx Agzsbf 22.4kW spindle motor, HAAS control, 254mm 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock,

Condition: good (used), Year of construction: 2016, 560mm swing over bed, Ibsdpfsw Rcuqox Agzsf 350mm Swing over the Cross-slide, 780mm swing in the Gap, 1750mm between centres, 104mm spindle bore, 1800rpm spindle in 2 ranges, 11kW Spindle Motor, coolant, Prototrak SLX Control, 3 & 4 jaw chucks, QCTP & holders, fixed steady, tailstock.

Condition: good (used), Year of construction: 2011, 450mm swing, 210mm max diameter, FANUC 0i Control, 51mm bar capacity, 12 station turret, 11/7.5kW Spindle Motor, Ibedpsxuhwqefx Agzof 4,500 rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, Ibodoxv Tf Nepfx Agzef 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Ibodpfxjwwtrbo Agzof 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2013, 4000mm between centres, Iodpfexp Hhdox Agzjbf swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.