Used Vdf 250 for sale (9,987)

Condition: ready for operation (used), Year of construction: 1972, Immediately available from university: Boehringer VDF L & Z Lathe Type E 560 Year of manufacture: 1972 Very few operating hours Centre height: 305 mm Swing over bed: 610 mm Turning length: 4,000 mm Swing in gap: 810 mm Swing over cross-slide: 375 mm Spindle bore: 82 mm Spindle speeds: 7 – 1,400 rpm Drive: 12.5 kW Heidenhain digital readout Chuck Faceplate Multifix toolholder with many inserts Steadies Gbsdpfx Ajyir Scjfnjh Weight: 7 t Price: EUR 12,500 plus VAT ex location

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: Gbedpfxjw Rdths Afnoh The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 250 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8690,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... Gbedsyh H T Aepfx Afneh We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Control: Conventional - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information Godpfxswniiko Afnjbh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Heidenreich und Harbeck VDF lathe, generally in good condition for its year of manufacture. Comes with 3-jaw and 4-jaw chucks. Feel free to contact us with any questions. Gbjdpfx Aeyhzxtsfnjh

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 70 mm for shelf distance: approx. 250 mm dim. head plates: 130 x 60 mm Gsdsi Hpkxjpfx Afnebh profile dim.: U 62 x 45 mm Weight: approx. 1,660 kg | pcs. General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), We offer you here a used shelf connector of the manufacturer SSI Schäfer for sale. Technical data of the shelf connector: Manufacturer: SSI Schäfer Included in the scope of delivery: Gbodpfx Afjd Ttz Rsnsh 01x shelf connector used material colour: blue Shelf spacing: approx. 250 mm L-profile: approx. 40 x 40 mm Weight/pc: approx. 0.536 kg/pc. 02x hexagon head screws, M8 x 20 8.8. 02x hexagon nut, M8 02x washers, M8

Condition: good (used), The scope of delivery includes: 01x shelf connector, used for shelf distance: approx. 250 mm total length: approx. 330 mm cross section: U 30 x 52 mm Material color: blue Gedpfji Dfizsx Afnebh weight: 0,46 kg | pcs.

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) Gbodpjdf S Eyofx Afnoh More treble & bass can be customized on request. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: Gjdpfx Afjmqk Svjnsbh This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. 04x hexagon bolts, M8 x 20 8.8. Gbsdpoi Dtcnsfx Afnjh 04x hexagon nut, M8 04x washers, M8 General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Gbedpfeycpw Aox Afnsh Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-site: L & Z VDF Lathe Type: 21 RO Year of manufacture: 1975 Centre height: 210 mm Swing over bed: 430 mm Swing over support: 250 mm Spindle bore: 56 mm Gbedpfxsyg Emhs Afneh Spindle speeds: 15 – 1400 rpm Drive power: 5.5 kW Weight: 2.5 t Chuck Tool holder Coolant system Price: Euro 2,500.— plus VAT, ex-site.

Condition: used, Year of construction: 1982, centre height ca. 150 mm centre distance 1300 mm Gjdpsp Icp Uefx Afnobh vorhanden diameter ca 250 mm digital readout 1x make Heidenhain u. Werkzeug-Sc serial number 63-06

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . Gbodpfx Asrfd U Rofneh max durchlass 369 mm

Condition: good (used), Year of construction: 1991, Centre height: 285 mm Distance between centres: 1250 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 365 mm Spindle bore: 62 mm Bed width: 360 mm Speed range, 24 steps: 11.2 – 2240 rpm Feed rates: 60 longitudinal feeds: 0.06 – 56 mm/rev 60 cross feeds: 0.03 – 28 mm/rev Thread cutting: 60 metric thread pitches: 0.5 – 448 mm 60 inch thread pitches: 56 – 0.0625 TPI Quill stroke: 190 mm Quill diameter: 80 mm Tailstock taper: MK 5 Drive power: 15 kW Dimensions L x W x H: 3500 x 1440 x 1380 mm Weight: approx. 2,600 kg Accessories / Special Features: • 3-jaw wedge bar chuck, SCHUNK 315, with jaw safety lock • Feed and rapid traverse via cross selector switch and pushbutton • Quick-change toolholder system “Multifix” size C • Coolant system • Safety guard for chuck, electrically interlocked Including new slideway wipers Gbedpfsx Upp Rox Afnjh Option: - 3-axis digital readout, make K+C - Further accessories such as faceplate, live center, tools, etc. on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg Gedpfjyaq Hgjx Afnjbh – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts. Godpfx Ajw Uf Tkjfnebh

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Godjyg N E Iopfx Afnjbh

Condition: used, Year of construction: 1975, turning diameter over bed 820 mm turning diameter over slide rest 575 mm turning length 3300 mm centre height 410 mm spindle bore 125 mm spindle turning speed range 7,1 - 1400 U/min total power requirement 22,0 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external) Gbedpfxeyfwyks Afneh

Condition: excellent (used), Catalogue number: 7545 Gbedpfx Afjx Uz Tuenoh TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Gedpfxsuq A Ice Afnsbh Machine located in central Poland, ready for checking. Perfect condition.

Condition: good (used), Scope of delivery includes: 01x CS profile, used Gbsdpfx Aex R Ambofnjh Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Material thickness: approx. 2.5 mm Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Should you require transportation or shipment, additional costs will apply. These can be quoted separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls Gedpfjx Tgxmjx Afnobh - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg Gbsdjdna Afopfx Afneh