Used Vertical Dryer for sale (9,213)

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (manufactured in 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 2160 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Kedpfezpbcvjx Ap Dodu Cutting area: approximately 5300 mm in length 2160 mm in height Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. The machine operated flawlessly until it was disassembled; all parts, as shown in the pictures, have some signs of wear and tear. Location: in storage at 54634 Bitburg.

Year of construction: 2026, condition: new, functionality: fully functional, Item: LC-V12286 - Vertical tank 45m3 NEW tank: Capacity 45,000 L Kdodpj Aawd Isfx Ap Dju Exterior dimensions: Diameter Ø 2650 mm, Total height 8700 mm. New, vertical stainless steel tank - 1 piece. Finish: 2B inside, welded and polished, Ra08. Flat, sloping bottom. Manway in the lower part of the cylinder. AISI 304. Can be delivered with insulation in optional trapezoidal plates and agitators.

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Kjdpfxezp Nt Ae Ap Djdu Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2007, Striebig Panel Saw Compact 6220, year of manufacture 2007 Solid, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting precision Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Kedpez N Igaofx Ap Djdu Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 hp) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 5600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 6220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, SPINNER VC 750 – Year of manufacture 2017 Manufacturer: SPINNER Type: VC 750 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D sl / ShopMill Axes: 3 Ksdpfx Aez Rzzyop Dedu Working area: Travel in X-axis: 760 mm Travel in Y-axis: 460 mm Travel in Z-axis: 460 mm Table clamping area: 900 × 410 mm Max. table load: 350 kg Stiens Werkzeugmaschinen Main spindle: Max. spindle speed: 12,000 rpm Tool holder: SK 40 Spindle drive: approximately 11 kW or 17/10 kW, depending on the configuration Rapid traverse rate X/Y/Z: 36 m/min Industry Pilot Tool changer: Tool positions: 24; also 32 in certain configurations Tool changer: Dual-arm rapid tool changer Max. tool diameter: approx. 130 mm Max. tool length: approx. 200 mm Max. tool weight: approx. 8 kg Stiens Werkzeugmaschinen Machine data: Machine weight: approximately 3,300–4,000 kg, depending on the configuration Dimensions: approximately 2,590 × 1,700 × 2,825 mm (without considering different accessory configurations) Coolant system and chip conveyor

Condition: good (used), Year of construction: 2002, Striebig panel saw Evolution 6224, manufactured in 2002 Type 6224 Year of manufacture: 2002 Ksdpfxezuyf To Ap Dedu Motor: 5.5 kW Cutting length: approx. 5300 mm Cutting height: approx. 2100 / 2240 mm Digital display in the Y-axis Center support Cutting depth: 80 cm Saw blade diameter: approx. 303 mm Wall mounting Adjustable slat grid Wooden back panel Dust extraction connection: D 120 mm Space requirement: approx. 6300 mm x 1250 mm x 2720 mm Weight: approx. 1200 kg Total connected load: approx. 5.5 kW Location: available from warehouse 54634 Bitburg, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: good (used), Year of construction: 2011, functionality: fully functional, Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Kdodez S H H Depfx Ap Deu Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Wele Awea Machining Center Type AA1165 Fanuc Series 18i-MB CNC Year 2008 Kdsdpfoz N Tf Iox Ap Dju Chip Conveyor ✅ Documentation ✅ Video Available ✅ Inspection Possible ✅

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Ksdpfx Apozzfr Ee Djdu Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. Kdjdpfx Asyug Hxjp Dou The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: repair required (used), Hyundai SPT-V30T machining centre with automatic tool changer. Powers on but does not start, servo error. Sold for repair or for parts. If you have further questions, we will be happy to assist. Kdsdpfx Apsx S I Iaj Dju

Condition: used, Year of construction: 1970, max. wheel diameter 1600 mm gear width 660 mm max. module 16/18 number of milling spindle turning speeds 18 number of feeds 18 total power requirement 12 kW Kdjdpfx Aoz Rqnvjp Dju weight of the machine ca. 20 t

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data. Ksdpfxjyplqro Ap Dedu

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, We offer in good conditon Hurco VMX42i with BT40 spindle and Winmax software. X-Axis travel: 1067mm Y-Axis travel: 610mm Z-Axis travel: 610mm Ksdj Aa Dd Ispfx Ap Dodu

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Kdsdpfezpynkjx Ap Dsu Documentation included Coolant tank with pumps

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Kdedez Il E Aopfx Ap Dju Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected power: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Kdsdjzhx A Rspfx Ap Dsu Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant, Kdjdpfxoz Sqqmo Ap Dju

Condition: excellent (used), Year of construction: 2021, operating hours: 4,300 h, DOOSAN T3600D VERTICAL MACHINING CENTRE YEAR: 2021 CONTROL: FANUC i PLUS X TRAVERSE: 520.0mm Y TRAVERSE: 360.0mm Z TRAVERSE: 350.0mm MAX. SPINDLE SPEED: 12,000 rpm TAPER: BT30 X-Y RAPIDS: 48.0m/min Z RAPID: 56.0m/min Kodpfxsz R T D Ue Ap Dedu MAX.CUTTING FEED RATE: 28.0m/min TABLE SIZE: 2 X 650 X 375.0 mm

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Technical details: Ksdpfx Apjznncmj Dedu Power: 4.4 kW (5.98 hp) Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Location: available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Kedpfxoz St Hwe Ap Dsdu Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 3-axis vertical machining center Year of manufacture: 2012 Kdodpfoz Rkarjx Ap Dju Further details will follow.

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm X-axis: 1016 mm Kjdpfx Apsz R Alte Djdu Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA Kdeds Aayf Ijpfx Ap Deu - Equipment: chip conveyor

Condition: defective spare-parts repository (used), CNDN CK6140 machining center, non-functional, has been disassembled, a new part has been machined but we have not reassembled it. Sold as non-working – can be reassembled or used for spare parts. Kodpfx Aox S I Dbop Djdu If you have any further questions, we will be happy to answer them.