Used Vertical Turning Center for sale (21,628)

Condition: excellent (used), Year of construction: 1999, operating hours: 4,541 h, X-Axis: 1,350 mm Y-Axis: 900 mm Z-Axis: 750 mm Lodpfx Aox Htqijgzsta Spindle Overhang: 830 mm (Distance from spindle motor to Z-guide). Rapid Traverse (X, Y, Z): 30 m/min Spindle Speed: 12.000 rpm ISO40

Condition: excellent (used), Year of construction: 2005, operating hours: 64,000 h, functionality: fully functional, turning length: 4,500 mm, WFL M60 x 4500 Turning, Milling and Drilling Center with 5 Axes Manufacturer: WFL MILLTURN Model: M60 x 4500 Location: Europe Year of manufacture: 2005 Turning length: 4,500 mm For all technical details of the machine, please refer to the attached technical documentation and photos. Below is a summary of the key specifications: Lubrication and Cooling Systems Central lubrication system Tank capacity: 6 l Oil type: ISO VG 68 Delivery rate: 0.5 l/min Max. pressure: 27 bar Minimum Quantity Lubrication (MQL) Tank capacity: 6 l Oil type: Klübersynth GH 6–100 Delivery rate: 0.5 l/min Max. pressure: 27 bar Lodpfx Asx H Awfsgzjta Pneumatic System Air consumption: approx. 200 l/min Operating pressure: 6 bar Working Area Nominal length (turning length): 4,500 mm Swing diameter over bed (linear guide X-axis): 690 mm Swing diameter over cross slide: 610 mm Swing diameter over telescopic covers: 650 – 730 mm Swing diameter over steady rest: 530 mm Spindle center height from floor: 1,193 mm Main Spindle Spindle mount: DIN 55026, Type A, Size 11 Front bearing: Ø 160 mm Rear bearing: Ø 150 mm Spindle bore: Ø 115 mm Draw tube passage: dependent on chuck type used Main Drive Motor power (100% duty cycle): 40 kW Spindle torque (gear 1 / 2): 1,830 / 458 Nm Total speed range: 8 – 3,300 rpm Gear 1: 8 – 825 rpm Gear 2: 33 – 3,300 rpm Upper Slide (X/Z) Feed force (Z / X): 2,000 daN Ball screw drives (Z / X): 63 × 20 / 63 × 10 mm Rapid traverse (Z / X): 20 / 15 m/min Travel Z-axis: 4,650 mm Travel X-axis: 700 mm (+670 / −30) Milling and Drilling Unit Max. spindle power: 25 kW Max. spindle torque: 300 Nm Front spindle diameter: 100 mm Speed range: 10 – 4,000 rpm Travel Y-axis: 300 mm (+175 / −125) Rapid traverse Y-axis: 12.5 m/min Feed force Y-axis: 1,500 daN Ball screw drive Y: 40 × 5 mm B-axis torque: 1,200 Nm B-axis swivel range: 200° (−110° / +90°) Tool holder: SANDVIK Capto C8 C-Axis Max. speed: 25 rpm Max. torque: 1,500 Nm Smallest programmable increment: 0.001° Clamping torque (disk brake): 4,000 Nm This offer is non-binding and subject to prior sale. We are pleased to answer any questions, provide a more detailed specification of the equipment, or coordinate further details (e.g., clamping devices, tool package, commissioning, and training).

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Ltsdsx Hy R Nepfx Agzsa Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t Ltodpfx Aev Rrq Dogzea dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Ltsdpfow Rgcfsx Agzja Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Lsdpfxsxqfzro Agzeta Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: used, operating hours: 2,015 h, travel distance X-axis: 265 mm, travel distance Z-axis: 1,305 mm, Mazatrol Smart Travels X/Z 265/1305 mm C-axis 0.001° Swing ø 720 mm Swing over cross slide ø 423 mm Max machining length 1274 mm Lodpex Nin Nofx Agzjta Max machining ø 420 mm Rapids X/Z 30/33 m/min Tailstock body travel 1265 mm Tailstock taper MT #5 Chuck size 10" Spindle speeds ~ 4000 rpm Spindle power 26 kW Milling spindle speeds ~ 4000 rpm 12 station tool turret Bar capacity 77 mm Coolant Interlocked guards Low Volt Light Magazine Barfeed Parts Catcher Swarf Conveyor Tool setter

Condition: ready for operation (used), Year of construction: 1990, Main Drive Spindle motor power 115 Kw Number of axis 2 Additional Equipment Chip Extractor Ltedpfx Agex E Ebkezea Complete Enclosure Cooling System Work Light Self-Centering Chuck Diameter: 2500 mm (removable) Refrigerated Electrical Cabinet This KOLOMNA 1532T vertical turning machine was manufactured in 1990. It features a robust design suitable for a variety of turning operations. If you are looking to get high quality turning capabilities consider the KOLOMNA 1532T machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Ltjdpfoxcbktox Agzea Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Ltjdpfsx H Thbox Agzea Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: excellent (used), Year of construction: 2004, operating hours: 7,987 h, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: 160 is-MB, table width: 500 mm, table length: 500 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,979 h, spindle motor power: 22,000 W, spindle nose: SK 40, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, high-speed machining center of Japanese construction with continuous 5-axis capability, complete with: remote handwheel, high-pressure coolant through spindle, chip conveyor, random tool changer, laser tool measurement system, wireless workpiece probe RENISHAW MP 10, FANUC high-speed package, network interface, serial interface, memory card Ltsdpfx Agox H Tx Hjzoa

Condition: good (used), Vertical machining center, Haas VF-3SS, year 2016, with internal cooling, rotary table, mist extractor... Ledpfxox El Uko Agzsta

Condition: like new (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, table width: 520 mm, table length: 1,150 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, Used vertical machining center Fanuc model VMC 1050A with: - X-axis travel: 1050 mm - Y-axis travel: 520 mm - Z-axis travel: 520 mm - Fanuc 18M control unit - 24-position tool magazine Ljdjx Ex Ahjpfx Agzsta - Spindle speed with gear change: 8000 rpm - Complete CE-compliant full enclosure - Standard accessories - Year of manufacture: 2002 Free financing over 12/24 months

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand OKUMA Model OSP-E100L Main Drive Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Lodex D Npmepfx Agzeta Application Types Turning

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition. Lsdpfx Agsxcbkmezeta Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Ljdpfjx H Tbbox Agzjta Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included.

Condition: used, Year of construction: 2009, 3-axis CNC lathe Brand: GILDEMEISTER Model: CTX ALPHA 500 Year: 2009 Max swing diameter: 240 mm Max workpiece length: 500 mm Max bar diameter: 67 mm Max X-axis travel: 210 mm Max Z-axis travel: 525 mm CNC control: CNC Pilot 4290 Included equipment: Ltodpfx Agox Ni D Dszoa 3-jaw hydraulic chuck C-axis: 360,000 positions 12-position powered VDI 30 turret Chip conveyor Tailstock Set of VDI 30 toolholders Oil mist extraction system Complete documentation CE compliant Price ex works (excluding VAT): on request* *Machine availability subject to prior sale. Technical details provided for information only, to be verified by the customer upon order.

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Ledpfxox Hqwgs Agzeta Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 28 m/min, rapid traverse Z-axis: 28 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Fanuc, controller model: 0i-MF, table width: 650 mm, table length: 2,500 mm, spindle speed (max.): 20,000 rpm, Equipment: chip conveyor, Mobile column vertical machining center Deli HB4D-250 - X-axis travel: 2,500 mm - Y-axis travel: 660 mm - Z-axis travel: 750 mm - Tool magazine capacity: 24 positions - BT 40 - Automatic, continuously tilting head on B axis with rotation +/- 110° - Integrated high-power, high-torque electrospindle, speed: 20,000 rpm - Hinged belt chip conveyor - High pressure through spindle: 30 bar - Pendulum machining capability - FANUC 0i-MF5 Beta CNC unit - Industry 4.0 & 5.0 package Lodpjxiv Dbjfx Agzeta

Condition: ready for operation (used), Year of construction: 2004, operating hours: 20,581 h, General Data Machine weight 8000 kg Main Drive Lsdsx D In Iepfx Agzjta Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 20 kW Tool taper VDI 40 Control Unit Brand SIEMENS Model 840D Power Line Movement X-Axis Movement 650 mm Z-Axis Movement 300 mm Y-Axis Movement 50 mm Technical Specification Driven Tools yes This 4-axis Gildemeister CTV 250 vertical turning machine was manufactured in 2004. It features a Siemens 840D Power Line control, a spindle speed up to 5,000 rpm, and a spindle motor power of 20 kW. The machine includes a turret with 12 tool positions, driven tools, a C-axis, and a high-pressure pump. Consider the opportunity to buy this Gildemeister CTV 250 vertical turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Lsdexb Efrspfx Agzeta - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm Lsdpfx Agjwvl Aijzota z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 1HRT 210 A with tailstock - Oil dust collector

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Ljdpsx Hqwaefx Agzsta Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Ltsdpfsx Emviex Agzoa Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Ltsdpjx Hqv Njfx Agzja Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.