Used Waste-Press for sale (15,529)

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN horizontal max. 16 kN Working height: 500 mm Knsdpjzuzv Tjfx Ah Sea Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Technical data Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Knedpfx Aozuzvmoh Sea Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data Knedezuzi Tjpfx Ah Sja - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine Knjdpfjzuzgrjx Ah Soa - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 Kodjzvdm Ropfx Ah Sona with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Operating voltage: 400 V Knsdpfxszvcxlj Ah Sea Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: used, Year of construction: 2019, machine/vehicle number: M01645/400/23/051/19, functionality: unexamined, power: 75 kW (101.97 HP), Schuler, Type: Eccentric press MC400, Machine No. M01645/400/23/051/19, Year of manufacture 2019, 4000 kN Technical data of the press according to the nameplate: Supply voltage: 3LNPE/400V/50Hz Control system: CCS/PNOZmulti Fuse rating: 250 A Rated power: 75 kW Rated force: 4,000 kN Work capacity: 60,000 J Max. strokes in continuous operation: 20-80 strokes/min Max. strokes in single-stroke operation: 30 strokes/min Max. clutch cycles in single-stroke operation per minute: 20 Post-travel time: 0.20 sec Min. safety distance: 322 mm Min./max. clutch pressure: 5.5/6.0 bar System pressure: 6.0 bar Stroke lengths: 40-315 mm Maximum ram adjustment: 200 mm Standard connection point of the ram: OU Max. installation space, largest stroke in UU: 750 mm Table dimensions: 3000 x 1400 mm Max. tool dimensions: 3000 x 1300 mm Max. weight of tool upper part: 2,800 kg Weight without additional equipment: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Serial No. M 2018-01118, Year of manufacture 2019 GSW Schwabe, Type: RMA 50/79, Serial No. M 2018-01119, Year of manufacture 2019 Including hydraulic unit, enclosure, and roller conveyor Knsdpfx Ahjzvcgps Sea GSW project no.: 2018-60420 with peripherals: - SCHÄFER lubricant supply system with tank - RAZIOL EST-10-D ELS-400, Year of manufacture 2018 - Conveyor belt - GÜTHLE ACT10F2000/2400N, Set of 2, Year of manufacture 2019 - Control cabinet Function and technical data have not been verified. Without further items/without further accessories, unless explicitly specified as part of the item. If interested, please contact us by email.

Condition: excellent (used), Year of construction: 2004, operating hours: 76 h, machine/vehicle number: HF112305, Size 47 x 66 cm, Console DTC (Sakurai Delivery Top Console) with Touch Screen, Full Remote Control Operation, SIS (Sakurai InterActive System) for make-ready, Plate Running Register system, SAS (Sakurai Auto Set) for paper size and thickness, SPC (Semi-automatic Plate Change), Cocking Register, Automatic Washers: Blanket Cylinders & Inking Rollers, Olivermatic Dampening, Baldwin Refrigeration System & Bal Control, Feeder with Suction-belt feed table, Electronic Double Sheet & Side Lay Detector, Chromed Impression Cylinders, Perfector 4/0 - 2/2 (Fully automatic), Semi-High Pile delivery, Powder Spray. Knodpfx Ahozubgrj Ssa

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Knsdpfx Aozvnd Tjh Sja Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Knodpfx Aszvnfdeh Sja Video about functionality available

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Knodpownhicsfx Ah Ssa Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 Ksdpfx Ajwnhvvsh Sjna - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Ksdpfx Ajzvfp Hjh Ssna

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Knjdpfjzvfqkox Ah Sja Clamping table changed! Not an original table!

Condition: as good as new (ex-display), Throughput of up to a maximum of 50 kilograms per hour. Briquette diameter: 50 mm. Main motor: 4 kW. Very compact design. Dimensions: 1,100 x 1,500 x 1,200 mm. Weight: 570 kg. Kedpfxjzu Skne Ah Ssna

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Kjdezulknspfx Ah Ssna Main compression force 85 t Feed opening 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volumetric capacity: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions of press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made functional The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t Knjdpfxeiulkqj Ah Sea - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 120 kg Knedpfxey Tbvmo Ah Sja For further dimensions see pictures.

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake Kodpfsxf Na Ujx Ah Sjna CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 115 kg For further dimensions see pictures Kjdpjzcgh Ejfx Ah Sjna

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm Kedoy Tpr Ajpfx Ah Sjna weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Kjdpfx Aswgi S Neh Sona Condition: used The punching machine works perfectly. A functional video is available.

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Kjdpsgrnaqjfx Ah Ssna Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Kedpfx Aozd Hm Nsh Sona Storage location: Nattheim.

Condition: new, The Press block feeder is a reliable machine suitable for unloading composite pallet blocks for the production of pallet legs. The PBF can simultaneously unload from two pallets of composite pallet blocks to one or two conveyors. Like the other gantry robots, the PBF is user-friendly and has the same type of interface as the rest of Mychrome’s equipment. The grip sheet is automatically removed and placed in a waste container. Machine specification: Standard performance Operators: 0 Length: 5 m Width: 2,5 m Height: 3 m Power: 10 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Knsdpfxswduuwo Ah Sea Machine capacity: 36 blocks per minute (one type of blocks) Standard equipment: - 1 gantry robot with operator panel - 1 vacuum gripper