Used Weiler Ud 24 for sale (177)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: Bedpfx Abswrmuxe Uelf >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake Bledpfx Aow Nw Dqjb Uof About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch Bodoxu Hlaopfx Ab Uolf >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm Bedpfx Aowa Dz Ejb Uolf centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard Bledsxv A I Tepfx Ab Usf - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Bjdpfshtnu Tsx Ab Uslf

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point Bjdsvgmbvopfx Ab Uelf

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis Digital Readout, Infinitely Variable Speed, As-new Condition, Year of Manufacture 2019 Technical Data: >> Year of manufacture: 2019 Machine no. OD08 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Number of feeds: 24 >> Longitudinal feed: 0.02 to 0.63 mm/rev >> Cross feed: 0.006 to 0.2 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 1150 kg >> Spindle brake >> Dimensions (LxHxD): approx. 1.72 m x 1.7 m x 0.89 m Accessories and Equipment: >> Weiler digital readout >> New collet chuck system; new collets from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size B with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts plan Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the relevant handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color screen >> 3 axes for bed, cross slide and compound slide >> 99 tool memory locations >> Oriented spindle stop >> Input for constant speed or cutting speed Blsdpfx Abow Swkve Uef >> Feed rate and thread settings displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis digital readout. Year of manufacture 2019, in as-new condition with original paint. The machine is, of course, fully functional and equipped with new collets and chuck. You are welcome to inspect the machine under power on site and see its condition for yourself.

Year of construction: 1973, condition: excellent (used), turning length 125 mm Blodpfxexpxqwj Ab Usf weight of the machine ca. 0,4 t

Condition: used, Year of construction: 1999, turning diameter 150 mm Bljdpfxsvm Dv Do Ab Ujf turning length 500 mm total power requirement 4 kW weight of the machine ca. 0,8 t

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Bljdpforuqzcjx Ab Usf

Condition: ready for operation (used), Year of construction: 1996, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, Weiler Voest Alpine E50 lathe Comes with 3-jaw chuck and 6 multifix tool holders Blsdpon Hp T Asfx Ab Uof

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning length: 750 mm, turning diameter: 330 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 750 mm Turning diameter: 330 mm Diameter over cross slide: 160 mm Spindle bore: 43 mm Maximum spindle speed: 4,500 rpm MACHINE DETAILS Control: Siemens Bedpfx Aoxf Hiaob Uolf EQUIPMENT Collets Jaws Tool holder

Condition: good (used), Weiler lathe Turning diameter bed: 280 mm Turning diameter support: 180 mm Turning length: 800 mm Spindle bore: 24 mm Speed max: 1600 RPM Diameter faceplate: 140 mm Included tools and coolant pumpe Dimensions: 156x70x133 cm LxWxH Bedpfxol Ayd Re Ab Ujlf

Condition: used, functionality: fully functional, This Weiler Commodor lathe comes from a technical school and, as such, has low operating hours. Lightly used and not heavily loaded – a tidy, reliable machine with a long service life ahead. Turning length: 1,000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed range: 25 – 2,000 rpm Number of speed steps: 18 Spindle bore: Ø 56.0 mm Spindle taper: MK DIN 228 / MK 4 Spindle flange: DIN 55027 / size 6 Cross slide travel: 150 mm Bed width: 310 mm Feed rate – longitudinal: 0.022 – 0.8 mm/rev Feed rate – cross: 0.011 – 0.4 mm/rev Voltage: 380 V Total required power: 7.5 kW Bsdpfxow U Sx Hj Ab Ujlf

Condition: good (used), Lead and feed screw lathe WEILER PRAKTIKANT 800 R - Swing diameter over bed: 300 mm - Swing diameter over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40 - 2000 rpm - Automatic longitudinal / cross feeds Bodox A Uktjpfx Ab Uelf - Thread cutting / metric / inch etc. - Tailstock Morse taper 3 - Three-jaw chuck - Chip guard rear wall + work light - Chip tray - Change gears - Tool cabinet - Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750 kg Errors and input mistakes excepted

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Blsdpfxsw T U Sge Ab Ujf Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Accessories and equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp Bsdexw H Dbjpfx Ab Uolf - Bed stop - Documentation Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 Bljdpoufud Dofx Ab Ujf :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, Bledpfxju H U S Hs Ab Ujf We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Bsdswhx I Nepfx Ab Uelf Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish Bjdpfsw N Np Ssx Ab Uelf - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, Blsdpfxewhzdms Ab Usf For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Bodpfxjthd Shj Ab Uslf Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: reconditioned (used), functionality: fully functional, spindle bore: 56 mm, center height: 180 mm, center width: 1,000 mm, Dear Sir or Madam, For sale is a Weiler Commodor B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, meaning it is in excellent technical, geometric, and visual condition. You are welcome to visit us for a closer look. Availability: upon request Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Power consumption: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital readout K+C NEW, coolant system, chuck guard, removable chip tray, operating instructions, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field Mechanical Engineering - All machines undergo at least a workshop inspection. Bsdpfswhzivsx Ab Uslf - All lubricants and any worn parts are replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.