Used Wood Type for sale (40,347)

Condition: used, Year of construction: 2005, CITIZEN K16 VIIP Chedpfjzp Ecaox Aikja Year 2005 with bar feeder

Condition: used, Year of construction: 2003, CITIZEN L5 20 with bar feeder, year 2003. Chsdpjzp Eaxofx Aiksa

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III TECHNICAL SPECIFICATIONS: Year of manufacture: 2015 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate, X1 axis: 24,000 mm/min Rapid traverse rate, X2 axis: 24,000 mm/min Rapid traverse rate, Z1 axis: 32,000 mm/min Rapid traverse rate, Z2 axis: 32,000 mm/min Rapid traverse rate, Y1 axis: 15,000 mm/min Rapid traverse rate, Y2 axis: 15,000 mm/min Max. bar diameter: 20 mm Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm C-axis resolution: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm C-axis resolution of the counter-spindle: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool holder: 8 Number of positions in turret 1: 5 Number of driven positions in turret 1: 3 Speed of driven tools in turret 1: 8,000 rpm Number of positions for secondary machining: 8 Codpfezp D Uuex Aikjha Number of driven positions for secondary machining: 4 Speed of driven tools for secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Chodpferkpp Hsx Aikja Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 4,000 rpm, table width: 1,200 mm, table load: 4,000 kg, table length: 3,860 mm, mount diameter: 50 mm, total height: 3,640 mm, total width: 4,500 mm, total length: 8,900 mm, rotational speed (max.): 4,000 rpm, workpiece weight (max.): 4,000 kg, overall weight: 24,000 kg, FIBRO indexing rotary table, 800 mm Enclosed, covered machine with doors for easy access Indexing head: 2.5 x 2.5 degrees Automatic lubrication Double chain chip conveyor Machine owned by one previous user, in working condition X-axis: 3500 mm Y-axis: 1200 mm Z-axis: 1400 mm Table length: 3860 mm Table width: 1200 mm Table load capacity: 4000 Table diameter: 800 mm Feed rate, X-axis: 20,000 mm/min Feed rate, Y-axis: 20,000 mm/min Feed rate, Z-axis: 20,000 mm/min Tool interface: 50 ISO/BT/MK Spindle power: 30 kW Spindle speed: 4000 rpm Tool changer: 30 Number of controlled axes: 3 + 1 Chip conveyor: Yes Coolant system: Yes Length: 8900 mm Width: 4500 mm Height: 3640 mm Weight: 24,000 kg Chodpfxjzl Afdj Aikja

Condition: used, functionality: fully functional, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 4,500 x 1,150 x 700 Width including drive: 1,050 Conveyor length in mm (retracted): 4,500 Conveyor length in mm (extended): 12,500 Conveyor width in mm: 700 Conveyor height in mm: 640 Load capacity between 2 supports in kg: 20 Support roller axle type: Steel Support roller diameter in mm: 40 Support rollers per axle: 1 Support roller material: Steel Roller pitch in mm (retracted): 50 Roller pitch in mm (extended): 115 Drive: 10 x motor stations Motor manufacturer: SEW Csdszrr U Iepfx Aikeha Motor specifications: 0.12 kW (total 1.2 kW), 230 V Conveyor speed in m/s: 0.7 Net weight: 360 Special features: Emergency stop, Schuko plug, Steinmetz circuit Condition: used / fully functional Functional test: OK

Condition: good (used), Year of construction: 1990, For sale: Zayer KF 3000 CNC milling machine. This is a large-capacity, fixed-table machine designed for machining heavy parts. Technical specifications (typical Heidenheim model): Dimensions and mechanical capacities: - Table length: approx. 3000 mm - Table width: approx. 1000 mm Csdpfx Aszlrltsikjha - Maximum table load: approx. 10,000 kg - X-axis travel (longitudinal): approx. 2700 mm - Y-axis travel (transversal): approx. 1250 mm - Z-axis travel (vertical): approx. 1000 mm (up to 1500 mm depending on version) - Machine weight: approx. 22,000 – 30,000 kg Spindle and power: - Spindle speed: up to approx. 3000 rpm - Spindle motor power: approx. 30 – 37 kW - Spindle taper: ISO 50 Numerical control: - CNC: Typically Heidenheim TNC

Year of construction: 2011, condition: excellent (used), SLIDING SAW GOMAD TYPE FBKSR I will sell a GOMAD FBKSR format saw, table length 3800. Condition as in the photos, year of production 2011 with or without extraction, documentation, manuals, the machine is operational, price on request the machine has a scoring unit and the rocker saws are technically efficient main saw 400 mm blade, scoring saw 100 mm setting at an angle of 45 degrees cutting length 2800 mm cutting width 1250 mm, ruler on electronics. Rotation 4000/5000 / 6500min. -1; Codpjia Ngtjfx Aikoha weight 990 kg

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control Cedpfozldxrsx Aikjha sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: used, Potato specialties oven suitable for thermal oil heating infeed height: ± 1.000 mm outfeed height: ± 1.000 mm suitable for fire protection with seperate infeed belt oil circulation system net belt length: ± 9.000 mm net belt width: ± 650 mm adjustable speed lifting unit dimensions (l x w x h): ± 12.720 x 1.625 x 3.455 mm steam connection heated drip tray 0.5 - max 3 bar. oil level check VEGA central air extraction with telescopic chimney Infeed belt Type TB-D 2100-6.5 Dimensions: 2,100 x 650 mm 0.37 kW/1.1A External tubes heat exchanger “Van de Walle Apparatenbouw” Type Florigo WW050 BT Year of manufacture 08/2013 500 kW Type Van de Walle D323-V012-2000 Casing: Working pressure 6 bar / 290°C / 85L Tube: Working pressure 6 bar / 220 °C / 94L Test pressure 9 bar Cjdpfezldxfsx Aikjha Drum filter Type FT750-3 Drum dia. 750 mm Drum dia. 300 mm 0.37 kW Drum 1.1 A screw 0.12 kW / 0.41 A Capacity 94 m³/h Blower 0.25 kW / 0.8 A Fryer Product belt 0.75 kW / 1.9 A Fryer top belt 0.75 kW / 1.9 A Lifting device 1.1 kW / 2.6 A Drum filter / Waste screw 0.12 kW / 0.41 A Fryer main pump 15 kW / 29.3 A Fryer auxiliary pump 0.55 kW / 1.5 A Fryer drip tray pump 0.55 kW / 1.5 A

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW Chedpfx Aiezldw Ijkea dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: like new (used), Year of construction: 2018, operating hours: 432 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Chodpfx Aijzmpydoksa Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, 3-axis-Bed Type Milling Machine - Universal | Brand: AUERBACH | Type: FBE 2000 Year of manufacture: 2002, complete overhauled by the manufacturer in 2015 The complete overhaul in 2015 included, amongst other things, the disassembly of all axes, cleaning, reassembly and recommissioning. The machine can be inspected under power by appointment. Condition: Very well maintained / ready for use. Operating hours (July 13, 2026): approx. 40.000 h Last maintenance carried out in 2025, at 36.250 operating hours. TECHNICAL SPECIFICATIONS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm Cjdpfx Ajzmn Rusiksha - Z-axis: 900 mm Dimensions / Weight: Dimensions W/D/H: 5,5 (7,15 including chip conveyor) x 4,1 x 2,7 m Machine weight: 13 tons EQUIPMENT: - CNC control system: Heidenhain TNC 426 - Universal milling head (mechanically swivelling), Brand: SEMPUCO, KFU-2/45/021 - Spindle speed: 3.500 rpm - Tool magazine: 46 positions - Tool holder: SK 50 - Electronic handwheel - 3D infrared measuring probe, brand: m&h Hexagon - Table load: 6 tons - 5 x 22 T-slots in the milling table - Chip conveyor with coolant system - Large air-conditioning unit control cabinet - Drive motor for the Z-axis (spare part) - Documentation in German No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, total length: 5,500 mm, total width: 2,000 mm, total height: 2,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 5 Units are available =Scope of supply= Chedpfezrvf Dex Aikea Genset mtu 16V4000L64FNER, 400 V for operation with Natural Gas. Gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. Set of sylomer stripes for genset foundation installation. Set of flexible connection for engine coolant circuit with flange connection. Set of flexible connection for mixture coolant circuit with flange connection. Set of exhaust bellows with flange connection and companion flange. Set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - November 2026 Engine type - 16V4000L64FNER Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Voltage - 400 V Frequency - 50 Hz =Other information= Production country - Germany

Condition: used, Butler Elgamill CNC Travelling Column Bed Type Mill x 5000mm T slotted Table 8,000mm x 1030mm Column travel X 6200mm TBC Ram travel Y 1250mm TBC Vertical travel of Head Z 1950mm TBC Spindle speeds Various and a Max of RPM TBC Spindle Taper 50 Spindle drive motor HP TBC Power feeds Horizontal and Vertical 6 – 500 mm/min Rapid power traverse to all motions 2,000mm/min Complete With: Csdpfx Aoyx Hv Ajikeha Heidenhain CNC Control Manual Indexing Head Machine Data: Machine weight 20,000kg

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Chsdpox Twcpefx Aikoa

Condition: used, TECHNICAL DETAILS Chodszrh Scepfx Aikja - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 240 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 6000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] - Number of hours under power : 8291 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 vertical+horizontal,S6 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor : INDASS - Coolant tank - Bar loader : Tornos SBF-532

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 6 END ATTACHMENT - Number of positions : 8 - Number of motorized positions : 5 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1102 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] Cjdpfx Aiszrh R Sskoha MACHINE HOURS - Number of hours under power : 34646 [h] - Number of working hours : 7582 [h] EQUIPMENT - CNC : Fanuc 18i- TB - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank * with high-pressure pump - Bar loader : Iemca Smart 320 - Electric transformer

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Chodpfjzrlu Uex Aikoa Rotor width: 820 mm Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Screen size: 20 mm In fully functional condition, ready for immediate use.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice! Chedpfx Aiszmdlnokja

Condition: used, Year of construction: 2008, travel -x axis 2.100 mm travel -z axis 1.400 mm travel -y axis 1.200 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 92 tool taper SK 50 BIG PLUS max. tool length 600 mm max. tool diameter 250 mm max. tool weight 20 kg rotary table dia. 1.700 mm max. swing dia. 1.800 mm total connected load 100 A 5-axis simultaneous machining center | REIDEN - BFR-22 equipped with 2-axis swivel head (A+B), NC - rotary table, 92-way tool changer, double gripper, ITC and chip conveyor. Scope of delivery: - probing system The machine has been regularly maintained by the REIDEN factory service team. In recent years, extensive repairs have been carried out and numerous wear parts have been replaced, including a complete overhaul of the milling head with a new intermediate shaft and bearings, as well as various electrical components. As a result, the machine is in a technically well-maintained and fully operational condition. It can be inspected under power upon request. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. Chedpfjzlkwzox Aikea - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BFR 22 | BFR22

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Cedpfx Aewwk Tvoikoha Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Condition: used, continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling Chedpfx Aiszk Dytjksa belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm Chsdpfszk Dxiox Aikja + Scale + Insert belt

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Cedpfx Aied Dy S Rsksha Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55