Used Xas 125 for sale (3,564)

Year of construction: 2003, condition: ready for operation (used), Baking area: 12m², decks: 5, deck dimensions X/Y: 1200mm/2000mm, loading guideline with 1kg bread: 30x5, heating type: oil, heating capacity: 90kW, version: Combitherm. Machine dimensions X/Y/Z: approx. 1900mm/3100mm/2450mm, weight: approx. 3000kg. Including lifting table. Documentation available. On-site inspection is possible. Giodex Ividepfx Abrjn

Condition: ready for operation (used), Year of construction: 2013, A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Giedpfx Ajxd Av Hobron

Condition: ready for operation (used), A diesel compressor Atlas Copco is available. Year of manufacture: approx. 2015, max. operating pressure: 7bar, volume flow: 7.6m³/min, power: approx. 55kW, fuel tank: 117l, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1500mm, weight: approx. 1500kg. An on-site inspection is possible. Giedpfx Abexn S Uaerjn

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container Giedpfsgyfmasx Abron - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SELCA, controller model: S3045, spindle speed (max.): 3,000 rpm, number of axes: 3, This 3-axis ZPS MCFV 125 EZ was manufactured in 1999. It features a Selca S3045 control system, a spindle speed of 3,000 rpm, and a tool changer with a capacity of 15 tools. The table size is 1,300 × 600 mm, and it includes a gearbox for gear changes. Consider the opportunity to buy this ZPS MCFV 125 EZ vertical machining centre. Contact us for more information. Giedeyctt Iopfx Abron • Rotary axes: No • Tool changer: 15 tools • Table size: 1,300 × 600 mm • Optical scales: Yes • Options: Gearbox (gear change) Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Operating hours: approx. 63,000 h The machine can be inspected at any time Godew D Rmispfx Abrein

Condition: excellent (used), Year of construction: 2008, 300 Kg load capacity welding rotary table, with hollow shaft diameter 125mm with jaw chuck 320mm or 400mm very robust speed infinitely variable from 0,15 to 5,0 rpm current transmission 350 A diameter rotary table 400mm Gjdpfxjlamtbs Abroin inclination up to 135 height horizontal 835mm, tilted to center approx. 735mm length 850 mm x width 580 mm

Condition: excellent (used), Two Arno 125mm machine vices and a 125mm Helox vice - 800 euros each Gsdpfxov Am Nfe Abrsin

Year of construction: 1974, condition: ready for operation (used), Working length: 3500mm, the pressure bar of the machine must be realigned. Gisdsi Acq Repfx Abrsn

Condition: used, - Dimensions: 735x1530x1620 mm - Total capacity: 300 L - Flour capacity: 125 kg Gedpfxjyg Er Ds Abrsin - Dough capacity: 200 kg - Serial number: 06.00043 - Stainless steel bowl - Year: 2006 - Electronic control - Transparent lid - 2 speeds - Voltage: 400 V - Power: 8.4 kW - Weight: 700 kg

Condition: excellent (used), mileage: 224,000 km, power: 375 kW (509.86 HP), first registration: 09/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: yellow, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,150 mm, loading space width: 2,550 mm, Year of construction: 2016, operating hours: 6,573 h, Equipment: crane, electric window regulation, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Leather interior - Leather upholstery - Alloy wheels - Air suspension - Reversing camera - Sun visor - Pre-heating system - Xenon lighting - Power take-off (PTO) - Coupling jaw = Additional Information = Axle Configuration Front axle 1: Alloy wheels; Steered Front axle 2: Alloy wheels; Suspension: Air suspension Rear axle 1: Alloy wheels; Suspension: Air suspension Rear axle 2: Alloy wheels; Lifting axle; Steered; Suspension: Air suspension Gjdpfeyg Ixaex Abroin Weights Unladen weight: 22,475 kg Payload: 14,525 kg Gross vehicle weight: 37,000 kg Functional Body brand: Palfinger PK 65002-SH F + JIB PJ 125 E CE marking: yes Interior Upholstery: Leather Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: excellent (used), Year of construction: 1992, max. wheel diameter 130 mm Gijdpfx Abeyb S R Asren gear width 400 mm max. module 3 min. module 0,5 Control Bosch CC 220 milling spindle speeds (infinitely variable) 300 - 1200 U/min clamping length max. 1160 mm swivel angle for work spindle +/- 45 ° x-travel 230 mm y-travel 170 mm z-travel 400 mm spindle speeds 1 - 125 mm total power requirement 52 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,8 x 3,8 x 2,5 m Machine in very nice condition!

Condition: good (used), Year of construction: 2000, 5-Axis CNC Machining Center Gsdpfeyckc Hox Abroin DMU 125P hi-dyn Year: 2000 Control: Heidenhain TNC 430 + New spindle in 2025 (8,000 rpm) + 3D probe Hexagon + ICS / spindle cooling Without zero-point clamping system! The machine is well maintained and can be inspected under power. Technical data: X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Spindle speed: max. 8,000 rpm Tool holder: SK 50 60-position tool changer Table size: 1,250 x 1,000 mm Max. table load: 2,000 kg B-axis: 360° / 0.001° Distance spindle center to column: 900 mm Max. tool length: 420 mm Rapid traverse (X / Y / Z): 40 m/min Feed rate: 0 – 15,000 mm/min Total connected load: 46 KVA Machine weight approx.: 13.5 t Space required approx.: 7.0 x 6.0 x 3.0 m

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet Gjdpfx Aehlnzksbrsin - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Machine Benefits Technical Machine Benefits • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ Godpfx Absyary Uorjin • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1

Condition: good (used), Nowicki KN1-125 Bowl cutter Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph Giodjnp Nc Ispfx Abron

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Godpfx Absyg Epcersin Pressing force: 125 t Working length: 4200 mm Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Giodpfx Aborm Ntpsrsn Stroke rate 70 1/min. Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, Description: ATN drum press DOUBLE-RAM-PRESS / DOUBLE RAM PRESS, 125 L, as new Giedpeyghnzofx Abren

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Giedpovuul Eefx Abrjn Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: good (used), Year of construction: 2006, 2006 Deckel Maho DMU 125 FD duoBLOCK 6-Axis Universal Turn/Mill Machining Centre with Siemens Control Godpfjyim H Eox Abrein 'T' Slotted Table Ø1,250 x 1,100mm (11 'T' Slots). Maximum Table Load 2,000kg. Axis Travel 'X'=1,250mm, 'Y'=1,000mm, 'Z'=1,000mm, 'A'= +180/-30°, 'B'=360°. Rapid Traverse 60m/min. Table Turning Speed Range 20-500rpm. Maximum Spindle Speed 10,000rpm (59kW Motor). 60 Position ATC. Spindle Taper HSK A100. S/No.1163 000011 3 (2006). The machine is available due to new capital investment and must be removed by 27 April 2026. Please note that the buyer will be responsible for providing suitable lifting and transport brackets for removal. With Dual Auger To Chip Conveyor, Spindle Inspection Probe Interface, Blum Laser Tool Setter, Paper Filtration Through Spindle Coolant System, Chiller Unit, Losma Darwin 3000 Mist Extractor Unit & Handwheel.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) Giodpfxehmmfke Abron - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, year of last overhaul: 2022, total length: 1,800 mm, total width: 1,100 mm, total height: 1,550 mm, input current: 32 A, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral Kneader Gostol SM 125 A with bowl trolley Kneading machine for up to 200 kg of dough Stainless steel bowl and spiral Gedpjyaf Sdjfx Abrein Cover with safety switch 2 timers and 2 speeds Robust construction Connection: 400V, 32A-CEE plug Dimensions approx.: 1100 x 1800 x 1550/1950 mm (W x D x H) Used machine We have more spiral kneaders in stock!

Condition: excellent (used), ELIN EBG electric motor MUP 125 F04 ZWZ Gsdpfx Abox Uqu Uorein

Condition: excellent (used), Insert face milling cutter ( 28233) type Gigacut AW 125-13-8 Gjdpfjhzt E Tsx Abroin diameter 125 mm mounting hole 40 mm weight 2,5 kg