Used Xas 125 for sale (6,027)

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable Prsdoct Dhaopfx Agzjf System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 12,500 mm, Year of construction: 2016, operating hours: 3,654 h, Technical information Make of engine: JCB Top speed: 25 km/h Empty weight: 10.060 kg Functional Lifting capacity: 3.500 kg Identification Serial number: JCB5AN7GCG2461211 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Podpfxjxpddpo Agzjrf Transport dimensions (LxWxH): 5.8x2.35x2.59 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Manufacturer: WEINGARTEN Type: ER 125 Table size: 800x620 mm Prodpon D Ebasfx Agzsf A small crack is visible on the load-bearing part of the press; it has been used this way for years. !!

Condition: new, functionality: fully functional, Universal centre lathe ŠKODA SRM 125 - 4000 after modernization of the mechanical part of the machine. The electrical part is equipped with Siemens CNC control: SIEMENS SINUMERIK 828D with SINAMICS drives. Technical data: Maximum swing over bed: 1,250 mm Maximum swing over carriage: 900 mm Maximum distance between centres: 4,000 mm Maximum workpiece weight: 14,000 kg Prjdpfsxyxdxox Agzof Maximum torque: 34,000 Nm Minimum turning diameter: 200 mm Bed height: 620 mm Bed width: 1,100 mm Spindle nose: No. 10 Number of speed ranges (infinitely variable in each range): 3 Spindle speed range: 1.4 – 350 rpm Main spindle drive motor: 39 kW, fixed gear ratio 1:3 Maximum workpiece diameter in jaws: 1,030 mm Spindle centre taper: 80 mm – 1:10 Centre height above bed: 630 mm Carriage: Feed rate (Z and X axes): 2,000 mm/min Rapid traverse (Z axis): 6,000 mm/min Rapid traverse (X axis): 3,000 mm/min Traverse motor (Z axis): Siemens 1FK7 101, 27 Nm, with planetary gearbox Traverse motor (X axis): Siemens 1FK7 060, 6 Nm, with planetary gearbox Maximum tool section: 70 × 70 mm Maximum tool section for turret head: 50 × 50 mm Tailstock: Quill stroke: 200 mm Tailstock centre taper: 80 mm, 1:10 Tailstock feed rate: 2,000 mm/min

Condition: used, Year of construction: 2007, pressure 125 t stroke 12 - 140 mm daylight, max. stroke above - ram adjustment above 495 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm total power requirement 70 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated multi-disc wet multi-plate clutch and spring-loaded safety brake - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Ram weight compensation - Manual TDC correction - Belt drive - Press force measuring device - hanging control panel - reverse switch (return) - electric stroke counter - electric preselection counter Prodpfx Agjxx A Dtozsf - electronic cam switch - clamping plate - two-hand control panel, swiveling, height-adjustable - Operating hours counter - 1 set of swing elements - with feed The press is technically inspected at our premises and undergoes a current safety inspection.

Condition: excellent (used), mileage: 200,000 km, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, loading space width: 2,550 mm, Year of construction: 2019, operating hours: 6,523 h, Equipment: low noise, trailer coupling, = Additional Options and Equipment = - Power brake booster - Electric windows - Electrically adjustable exterior mirrors - Rotating beacon - Sun visor - Toolbox - Xenon lighting - Power take-off (PTO) - Towing hitch = Further Information = General Information Year of manufacture: 2019 Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Prodpexwlr Dsfx Agzjf Weights Unladen weight: 23,686 kg Payload: 12,314 kg Gross vehicle weight (GVW): 36,000 kg Functionality Crane: Yes Body brand: Palfinger PK 65002-SH F + JIB PJ 125 E CE marking: Yes Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Prjdpfxoxpqzzo Agzef Good condition Suitable for collecting, storing and transferring recyclables

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min Prjdevuk N Tepfx Agzof distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation

Condition: not inspected (used), Year of construction: 1999, Manufacturer: KUKA Podperrv Uzefx Agzerf Tip: VKR 125/2 Year of construction: 1999 Unknown status Without connection cable!

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück Podsu Idw Ispfx Agzorf taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: new, Cutting area round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Prjdpfx Agoilk Ekjzjf Cutting area round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting area round 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m / min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw arm can be tilted up to 60 - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Stable saw arm for low-vibration work - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Environmentally friendly, as there is no need to use lubricants and coolants - Ideal for use on construction sites due to its low weight - Underframe optionally available (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Underframe available at an extra charge: 149 Euro net

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Prodpexvz Edofx Agzef Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: excellent (used), overall weight: 17 kg, jaw width: 125 mm, total length: 345 mm, clamping length: 150 mm, Modular vise, jaw width 125mm Pedpfxoxmk I Nj Agzerf Gerardi Modular 125 Robust machine vise, drill press vise Overall length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw included Mechanical clamping operation using 19mm wrench or ratchet The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press Predovut D Tepfx Agzsf permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain Pjdpfxsxmagne Agzerf turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Year of construction: 2018, condition: used, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. Predpfxju Utmpo Agzof *

Condition: new, Undercarriage suitable for the mobile bandsaw MIOTAL® S 125 G Prjdpfjw Hxdusx Agzsf

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Pedpfjxqx Avex Agzjrf Heating power: around 11 kW

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, overall weight: 600 kg, input voltage: 380 V, Equipment: CE marking, A set of equipment for the production flap discs 125mm and mini flap discs 50mm R-type + discs labeling machine Automatic machine for producing flap discs (100–150 mm) and 50 mm Type R (Roloc) mini discs. Pedpfx Agoxw D H Tjzsrf Functions: - Automatic flap feeding - Disc sizes 50–150 mm - Adhesive application, pressing, PLC Advantages: - Wide range, stable production, easy operation

Condition: reconditioned (used), Kemper F 125 ASL Paddle Mixer - used - capacity: 200 kg dough - 1 removable bowl - manual controls Podpsxxibfefx Agzerf - bowl and mixing tool made of stainless steel - machine has undergone refurbishment - collection from warehouse / shipping option available - price on request

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm Prjdpfx Agou Idwbozef dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Pjdpfxou Nfibo Agzorf Machine is not functional and is on sale as is! *

Condition: used, Technical details: number of spindles: 9 Stück Psdpfxsu Idvko Agzerf total power requirement: 83,0 kW weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. *

Condition: used, Technical details: Prodpfxeu Idwno Agzsf number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Prsdpfx Aju Nwwqsgzsf Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m i.D. *