Milling motor for edge processing machines

Perske VS 31.09-4

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Cgsdpfx Acsfi Tg Hswou Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Cgodepp Tkfjpfx Acwju Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Cgedpeqvnmbjfx Acwju

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Cgodpfx Ajp N D Ngecwsu Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Cgedsfi Tkgspfx Acwou SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Year of construction: 2012, Single-sided edgebanding machine for softforming, rebated door edges or any other softforming application Glue system with slot nozzle available for different glue Eva, PU, Poliolefina panel thickness range 10-60 mm Cgedpfxowt Uu As Acwou 2 x milling unit for processing workpiece profiles IR lamps for material heating unit for applying anti-adhesive agent glue melter and glue application system with tank made by Meller, temperature and melting time electronically controlled pressure zone: revolver with heated pads or can be replaced with rollers magazine for edge banding tape front and rear cut-off units bottom and top milling units for longitudinal band excess (2x top and 2x bottom) top and bottom polishing units PC control system for quick, easy and precise setting of the main machine functions including aggregates

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation Cgedpeww H Rwofx Acwou iron cast body

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Cgedpfxjv Sthgo Acwju Terms of delivery: ex location

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Codpfx Aerzhftjcwogu Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system

Condition: used, Dimter Profipress L 2500 Cgedpfxoyhggrs Acwju Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW