Prima Power Laser Genius + 1530

Prima Power Laser Genius + 1530

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop Lsdpfx Abjgg N Hbs Tjrh - Documentation - Weight 1800 kg - 400V

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional Lrsdenh R Ekspfx Ab Toh OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Lodpokh Niqsfx Ab Torh Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable Ledpfx Abjh Etf Ro Terh -Maximum load per pair: 40,000 kg Seat posts: -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -closed outer frame with cut-outs for lashing straps (LC 1,500 daN) -steel floor covering with anti-slip coating -including perforated strip for aluminum docking lights -2" kingpin -Mechanically operated BPW seat posts -550 mm long, 8' chamfer at the gooseneck end -Front wall incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted upright on the front of the gooseneck -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -Aluminium plug-in drop sides 400 mm high, consisting of 2x drop sides, side length 3,150 mm and rear drop sides with stanchions (galvanized) -Rectangular storage box, aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, center -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, left -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, right Loading area, easily telescopic: -closed outer frame with cut-outs for tension belts (LC 1,500 daN) -Fixed part at the front 700 mm Sheet metal floor covering with anti-slip coating -Angled interface between fixed section and loading area for attaching bridging rails and wheel recesses -Excavator trough incl. slotted holes for load securing (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) Ljdpfoi Ai E Rsx Ab Torh -spars for widening to 3,000 mm -Sloping vehicle rear 8°, 550 mm long -Carriage design for easy attachment and removal of ramps -Continuous mud flap at the rear -1 pair of LC 10,000 daN lashing points in the middle of the cargo bed behind the gooseneck -7 pairs of LC 10,000 daN lashing points in the outer frame of the cargo bed -6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the cargo bed -1 pair of LC 10,000 daN lashing points in the center of the rear area of the cargo bed -1 pair of stanchion pocket strips approx. in the middle of the cargo bed -1 pair of stanchion pocket rails on the fixed part -1 pair of stanchion pocket rails behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wooden decking larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (disassembly) system Chassis: -axle make BPW ECO Max -2 ride heights -4 axles 10 t each (technically 12 t) -Twin tires 245/70 R17.5 -2 x rigid axle and 2 x friction-steered axle -Reverse steering lock on the friction-steered axle via reverse gear -Knorr brake system (in accordance with EU regulations with EBS-E) -TIM G2 from Knorr (trailer information module) -RSS (Roll Stability Support) driving stability control Load-dependent lift axle on the first axle incl. start-up aid (forced lowering of the lift axle possible via TIM) Accessories: -4 wheel chocks with holder 2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and plug-in position for rotating beacon, infinitely adjustable up to 3,950 mm -Fastening options on the gooseneck and on the loading area (alternatively on the ramp, if available) are included -pluggable bulkhead plate at the end of the excavator trough -Electro-hydraulic unit for ramp operation -Ramp operation via radio remote control -Hydraulic relief supports at the rear of the vehicle for support during the loading process -1 Pair of additional reversing lights rear switched to reverse gear -Wooden widening planks - larch (optional)

Condition: new, Working width: 4010 mm Bending capacity (St42): 2.0 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Lrjdpfx Absp Dufzj Toh Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm Lredpfx Aboxgua Ao Toh 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. Lredpfxoxab Ero Ab Toh total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min Lredpfx Aovmmruob Toh - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,490 kg, lifting height: 10,000 mm, mast type: telescopic, Year of construction: 2016, operating hours: 4,614 h, total length: 6,140 mm, free lift: 1,100 mm, construction height: 2,990 mm, fork length: 2,400 mm, fork carriage width: 2,480 mm, drive type: Diesel, load capacity: 13,000 kg, construction width: 2,510 mm, Rigid telescopic forklift Load center of gravity: 600 Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostat Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Size: 17.5 R25 Front tires Condition: 60 - 80% Lredpst Dd Haofx Ab Toh Rear tires Type: Air Rear tires Size: 17.5 R25 Rear tires Condition: 60 - 80% Description: Full cab with heating and air conditioning, lighting similar to STVO, 3rd + 4th valve to fork carriage, joystick sideshift, fork positioner, Hydraulic sideshift Hydraulic fork tine adjustment (opening dimension inner edge - inner edge = 610 mm - 1,950 mm) 3rd valve, 4th valve, rear working lights, heating, soot filter, full cab, air conditioning, interior mirror, exterior mirror, joystick, windshield wiper, seat,