Rotary table

Protec KT 50

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Gbsdsd A Etyjpfx Am Asr Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 1.7 – 15 rpm Includes foot-operated remote control

Condition: good (used), Year of construction: 2009, Machine will come with robot . 42.000 rpm Gjdpfsxfu S Nox Am Aobr

Condition: not inspected (used), VERINOX JUNIOR universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking - Steaming Preparation uses: cheese, salami, pasta, confection of vegetables and fruits, drying of meat products, smoking of meat products, animal food, fish, etc. Junior universal ovens are thermally insulated with an expanded material that has high insulating properties, coated with sheets of satin-finish and ribbed AISI 304 stainless steel. The excellent speed and uniformity of the heating up to a maximum of 180°C, an important feature of the JUNIOR, is ensured by stainless steel fans and special shielded heating elements. The JUNIOR oven comes with its own steam production system. Integrated control system. The microprocessor-based control panel is an extremely hi-tech, simple and reliable means of control. Its main features are working temperature and time indicators, an indication of the number of stages in progress, airlock position indicator, commands for setting ventilation, commands for setting stage transition, commands for setting pause and delayed start, memorisation of values and functions in progress. Total external dimensions: W 107 cm x H 100 cm x H 215 cm Interior dimensions: W 97 cm x W 75 cm x H 120 cm Interior dimensions of the lower collector drawer: W 73 cm x W 72 cm x H 25 cm Trolley: 90 cm x 72 cm x120 cm Gbjdjg H Tldepfx Am Asr The cell has 2 product probes. Power supply: 380 V, 12 kW For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Gbedpfsxwp Ehox Am Aor Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Godpfx Amjt Akt Rj Asbr Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Gbsdpfew Rm Saex Am Ajr Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, Year of construction: 2025, Genie GR20 Runabout vertical mast work platform, new, used, demonstration machines available Gbjdpfxsrh D R As Am Asr

Condition: new, empty load weight: 1,000 kg, maximum load weight: 1,500 kg, overall weight: 2,500 kg, loading space length: 5,100 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Stable and high-quality sales trailer as a platform trailer for food service or merchandise. Our food service trailers from the SELLERH series are manufactured with an insulated sandwich panel construction. The robust steel frame is welded and hot-dip galvanized, ensuring high stability. A lockable steel door, not plastic, is installed in the door. The trailer body is made of 25mm polyester sandwich panels in white. The car trailer has four crank supports for lifting the food service vehicle. Therefore, it is an affordable car trailer for markets, food service, cocktails, fast food, non-food items, street food, and various other sales goods. Here is an overview of the standard features of our sales trailer: Entry door with lockable steel door, step on the drawbar, sales flap on the right with lifting aids that can be locked from the inside, electrical distribution, stable crank supports, 25mm sandwich panel construction, white exterior, maneuvering handles, support wheel with holder, robust welded frame, and a very stable V-shaped drawbar, hot-dip galvanized. As accessories for our sales vehicles, we offer additional flaps, tarpaulins, pocket shelves, sales counters, cabinets, sinks, PVC flooring, 100 km/h shock absorbers, and trailer locks. --- You can find all our cost-effective offers on our website. Gbjdpfxog Ttgqj Am Ajr --- Delivery throughout Germany (except islands) is possible! Please feel free to ask us for prices. --- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen, Tel: 0, Fax: Pick-up times: Monday - Friday, from [time] No pick-ups on Saturdays!

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm Gbedpeyackdefx Am Aer tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: Gbsdpfsd N Sm Dox Am Asr The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++