Glazing Bead Saw

RYKO GmbH GLSP-200N-AV

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE Bjdpfjuhpiyox Aknewu - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: Bodswzivdjpfx Aknowu KFB 353 = PVC and aluminum profiles

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Bodpfx Asqu N U Doknewu Maximum pressure 5 bar

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, NIVEAU - HS 350 Large lifting table without work surface Description: ᐳ Mobile scissor lift table with double horizontal scissors, basic model without work surface; with platform base frame for mounting various work surfaces; 4 swivel casters, 2 of which have brakes; wheel diameter 125 mm; operation via foot pump Load capacity in kg: 350 Weight in kg: 150 Useful lifting height in mm: 610 Overall height in mm: 400 Bodpfjh A Hxijx Aknowu Total height in mm: 1010 Platform size in mm: 1900 x 740

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Bsdpfeiq Hxvex Aknswu Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2016, condition: used, Manufacturer: Emmegi S.p.A. Machine: PVC Corner Cleaning Machine Model: Trimmer E Year of manufacture: 2016 CNC corner cleaning machine for PVC frame corners, with 3 interpolated axes and automatic cycle. It is equipped with a 300 mm diameter blade that allows, through different machining programs, the cleaning of the external corner of various profiles. Weight: 600 kg Air pressure: 6 – 7 bar Motor: E48 63/2 Bjdpfxoywu A Ie Aknjwu Speed: 2850 1/min Power: 3.5 kW Current: 6 A Power supply: 400/3 V Frequency: 50 Hz

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 30,000 mm, total length: 65,000 mm, total height: 10,000 mm, GALVANIZED STEEL STRUCTURE FOR A 1,950 M2 WAREHOUSE Industrial warehouse with a floor area of 1,950 m2, designed for a location near the sea, with the following dimensions: Bwjdpfxezuar Ts Aknou DIMENSIONS: Width: 30 m (Exterior). Length: 65 m (Exterior). Height: 10 m (Clear Interior). Two-pitched roof with a 10% slope. Constructed with S 275 grade steel profiles, rolled and galvanized for the main steel structure, and galvanized formed sections for the secondary roof purlin structure. The finish of the Main Structure (Columns, Beams, and Trusses) will be hot-dip galvanized at 450°C according to UNE-EN ISO 1461:2009 standards. In the case of the THC profiles of the Trusses, they will also be galvanized on the inside, ensuring complete protection of this structure, both on the inner and outer faces of all its profiles. INCLUDES: - CE marking for steel structures according to UNE-EN 1090-2:2011. - Detailed engineering, calculation report, structural drawings, and foundation plans. - APPENDIX OF CALCULATIONS APPROVED BY THE ENGINEERS’ ASSOCIATION, complying with data, loads, and assumptions provided by the client. - Certified fasteners for the assembly of the structure. NOT included in the budget: Anchor plates and purlins. These can be manufactured upon request. Transport and packaging not included. Delivery conditions EXWorks, including loading onto a truck – Talleres Ruiz FCA – Pol. La Portalada C/ Nevera, 3 26006 Logroño (La Rioja) - SPAIN - Incoterms® 2020 CE marking and manufacturer's warranty with more than 60 years of experience in the sector.

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm Bodpfx Aou Nigkoknewu air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed Bjdpfxstv Rgro Aknowu * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: excellent (used), For sale: OMIS 5 TON bridge crane, ideal for industrial use in a warehouse or factory building. 🔧 Main features: Bwodey Aymispfx Aknju Capacity: 5 tons (5000 kg) Type: double-girder overhead crane Brand: OMIS (Italy) Span (rail distance): 20,000 mm (20 m) Hook travel: 6.6 m Robust box girder structure ⚙️ Performance: Lifting speed: 4 m/min Bridge travel speed: 30 m/min (fast) – 7.5 m/min (reduced) Trolley travel speed: 16 m/min Power supply: 380V three-phase – 50 Hz Pendant push button controls 🏭 Usage: Always operated inside a covered industrial building Ideal for workshops, steel fabricators, and heavy-load handling