Pneumatic press

SCHMIDT

Condition: used, Year of construction: 2003, gearing type: other, first registration: 01/2003, color: orange, mileage: 1,001 km, empty load weight: 762 kg, driver cabin: other, Vehicle location: en route / in transit. Superstructure: Schmidt Stratos Mitos salt spreader, 1.7 m³ capacity. Data subject to change, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to modifications, prior sale, and errors! Nedpfszwvy Ssx Aiujwk

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display Nedpfx Asrxcu Sjiujwk - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: used, Manufacturer: Burghardt + Schmidt Yom: 1999 Slitting shaft OD: 145mm Tool OD: 240mm Material that has been slit: Stainless Aluminium Coated / Paint coated material, Colours, stripes, etc. Coil weight: 5Tons (coil cars 6ton) Width: Entry min/max: 35 - 590mm (600mm) Slit strip Min/max: 19,5mm - 585mm - Less is possible with different tooling Thickness: Min/Max: 0,1mm - 2mm Speed: Stainless: 120m/min (Thicker end) Aluminium: 370m/min Coil ID's: 300; 400; 500mm Nsdpfxszv Un Es Aiuswk Power: Pay off winder - 86kW DC Slitter - 82kW DC Re-Coiler - 230kW DC Scrap winder - 46kW DC Includes Leicht stamping + welding unit (WIG(TIG) 120/05/2/75/D-Z) EMG edge control at pay-off Entry bridle stand with edge control, camera control for e.g perfect parallelism of striped strips (painted etc.) Fume exhaust Scrap winder 2 Coil tilting tables, packaging table Fume exchaust at tension stand Siemens S7 controls On floor coil cars Overarm separation at rewinder Rewinder with hydraulic push off plate Traveling tension stand on linear guides 4 - arm coil turnstile at re-coiler Large set of tooling Required space aprox 16 x 12m (16 x 16 with the tilting tables, packaging area etc.)

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake * Load-dependent valve on the rear axle (required for all 50 km/h machines) * Driver's seat with air suspension * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors Nwjdpjzcfzwsfx Aiujk * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, sheet width - max.:200 mm Nodpfecxxn Eox Aiuewk plate thickness:4 mm dimensions of the machine ca.:0,90 x 0,50 x 2,70 m

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) * Steering wheel knob * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Nwsdezcfytjpfx Aiusk Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: good (used), Year of construction: 2014, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min Nsdpfx Aezuk Sdjiuswk -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 mm -Transport dimensions: 1640/850/H1560 mm / 2230/800/H200 mm -Weight: 555 kg

Condition: good (used), Projection welding machine Make DALEX Type PMS 16-1 Projection: 350 mm Rated power at 50 % ED: 250 kVA Sec. short-circuit current: 110 kA Nwedpfxjubdate Aiuek Sec. open circuit voltage: 12.5 V Electrode force: 340-2,040 daN with double stroke cylinder and feed stroke with synchronous welding control 5/36 TT Weight: 988 kg function-tested Machine is still being refurbished

Condition: used, mileage: 58,135 km, power: 62 kW (84.30 HP), first registration: 06/2018, overall weight: 3,500 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, next inspection (TÜV): 06/2024, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, onboard computer, parking sensors, * German vehicle * Available in multiple units * First owner * Condition, see photos * Only 3306 sweeping hours * 2 front rotary brushes, 700mm wide * Extension device * Sweeping width up to 2,300-3,020mm * Overall width 1320mm * Working speed 0-16 km/h * Sweeping debris container 1.8 m³ * Water system 400 liters * Sweeping drive, hydrostatic * 6956 operating hours * Ideal for sidewalks, footpaths, and bicycle paths, narrow streets, etc. * 2-person full-comfort cabin * Air conditioning * Heated panoramic windshield * Comfortable suspension seat * Rearview camera * Ergonomic arrangement of all controls * Radio, Bluetooth, MP3 * LED daytime running lights * All-round warning lights * 4-cylinder diesel engine, Euro 6 * Self-propelled working machine, street sweeper * Wheelbase: 1,600mm * Gross vehicle weight: 3,500 kg * Unladen weight: 2,810 kg * 50 km/h approval If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Nwjdpsvhp E Hsfx Aiujk Note: We offer and strongly recommend an inspection and examination of the goods so that no false assumptions arise regarding the condition and suitability for the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, mileage: 1 km, power: 39 kW (53.03 HP), first registration: 01/1996, overall weight: 4,000 kg, color: orange, driver cabin: other, gearing type: automatic, total length: 3,960 mm, total width: 1,300 mm, total height: 1,990 mm, Vehicle location: Bovenden, automatic, rotating beacon superstructure: sweeper approx. 11778 operating hrs. , ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Njdpfx Aievhhbysuswk

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 35 Year of manufacture: 2000 C-frame design Fixed table with lowering tank Travel distances: X=350 mm, Y=250 mm, Z=300 mm Max. workpiece size: X=780 mm, Y=400 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table to chuck: 150 - 450 mm Working current 64 Ampere Isopulse generator Linear glass scales with 0.5 µm measuring resolution Includes pneumatic chuck Erowa ITS 50/3R Systems Machine weight (net): 2800 kg Nsdoyyxbtepfx Aiuowk Machine dimensions (L x W x H): 1900 x 1690 x 2400 mm The machine was in operation with our customer until recently and is fully functional.

Condition: used, Year of construction: 2002, Additional title: Wort cooling Nwjdpfx Aioztywteusk

Condition: used, driver cabin: other, gearing type: other, Other: Nwodpfozu Rnlox Aiusk * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: new, Bernardo GB 35 Vario Gear Drill Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Maximum threading capacity: M24 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / 2 speeds: 65 - 460 / 460 - 3250 rpm Feed rate range: 0.1 / 0.2 / 0.3 mm/rev Overhang: 320 mm Distance spindle / table (max.): 580 mm Distance spindle / base plate: 1145 mm Quill stroke: 160 mm Column diameter: 120 mm Table size / T-slot size: 500 x 420 mm / 14 mm Base plate working area: 365 x 370 mm Motor output S1 100%: 1.5 kW Motor input S6 40%: 2.2 kW Machine dimensions (W x D x H): 600 x 870 x 2170 mm Weight (approx.): 375 kg Scope of delivery • Gear drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Coolant system • Threading device • Electromagnetic spindle feed • Automatic tool ejector Nwjdod Du Tyopfx Aiusk • LED machine light • Initial filling with Shell Tellus 46 • Digital speed indicator • Height-adjustable protective shield

Year of construction: 1993, condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Nwsdpfx Aijn I T Tgjuek