Parallel Lathe

WEILER PRIMUS

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Hnedjw Ebdbspfx Abreh Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Hnsdpogr Ur Refx Abrjh Workin speed 7.5 mm/seg Retraction speed 135 mm/ seg Engine power 30 cv

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Hedpfx Abow I A Uxsronh Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: Hodpfeyglk Hjx Abronh - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm Hsdpfx Aefmqqlsbrsnh TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: good (used), Year of construction: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, center distance 500 mm, max. turning diameter over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix toolholder, 24 longitudinal feeds, metric threads, imperial threads. Hjdoyh Hkhopfx Abronh

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Hnjdpfx Abertd Uworsh Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Hnsdoyciw Aopfx Abroh Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm Hjdpfxov Tyzcj Abronh >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Hsdjx Htf Hspfx Abrsnh Technical specifications: Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm Hsdpfx Abjlp Uz Usrsnh table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Hnedpfx Asyalurjbrsh Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, turning length: 500 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 30 rpm, Equipment: rotational speed infinitely variable, Distance between centers: 500 mm Hnsdsvnr E Nepfx Abroh Center height: 140 mm Spindle bore: 40 mm Speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: Operating instructions, lamp, multi-fix holder, collet chuck (at extra cost) Other accessories on request

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm Hnodpfsvv Etvox Abrjh >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Hjdpfx Abex Nkdxjrsnh Scope of delivery: - Documentation