Year of construction: 2004, Condition: good (used), I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Colq Uysh Txlcetijgt Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Year of construction: 1999, Condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm Cgelq Uyteiiy E Toijt grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: good (used), Year of construction: 2003, CONTROL SYSTEM • Numerical control: NC 1000 Cslq Uyeiy Eaastijgt TECHNICAL FEATURES • Useful working area “X” (min – max): 300 – 2.500 mm • Useful working area “Y” (min – max): 250 – 700 mm • Useful working area “Z” (min – max): 13 – 50 mm WORKING UNITS • Nr. 1 + 1 Drilling units on Nr. 2 independent movable beams completed of: – Nr. 20 + 20 Vertical drilling spindles – Nr. 3 + 3 Double horizontal drilling spindles in “X” – Nr. 1 + 1 Double horizontal drilling spindles in “Y” • Nr. 2 Inserting units for hinge plates and hangers

Condition: good (used), Year of construction: 2004, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: 174/0-404, Holz Her 32-axis CNC + C-axis 2 x 2x3-metre work tables, laser, with all tooling for classic and contemporary interior doors and classic entrance door mouldings Cgolq Usu Thhleytiot

Condition: used, Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 4,422 mm, travel distance Y-axis: 1,753 mm, travel distance Z-axis: 180 mm, controller manufacturer: SCM XILOG PLUS, controller model: num 1040, total height: 32,000 mm, total length: 80,000 mm, total width: 34,000 mm, spindle speed (max.): 20,000 rpm, number of spindles: 18, number of slots in tool magazine: 24, power: 11 kW (14.96 HP), Equipment: chip conveyor, documentation/manual, MorbidelliI Author X5 Evo 36- 5-axis machine! Type CNC machining centers Manufacturer MORBIDELLI ID no. 704 Year of manufacture: X-axis working range 4422 mm Y-axis working range 1753 mm Z-axis working range 180 mm Electro-spindle 1 pc. Main motor 11 kW C-axis rotary axis Tool magazine 24 positions Vertical drills 18 pcs. Horizontal drilling 6 pcs. Horizontal X-axis drills 4 pcs. Horizontal Y-axis drills 2 pcs. Machine table beam Positioning Windows software Control SCM XILOG PLUS Speed max. 24,000 rpm HSK-F63 chucks Number of beams 10 pcs. Bumper safety device Connection power 32 kW Vacuum pump 250 m³/hour CE mark YES Weight 5000 kg 5-axis machine! Laser positioning Remote control Cgjlq Uyeibq Ddetiet The price does not include the cost of bringing the machine to the buyer's premises.

Condition: new, Year of construction: 2025, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. Cgslq Uytjiz S Hajijt We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Colq Uytsir Aq Teiogt Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Condition: used, Year of construction: 2006, SCM Reccord 142TUN - Year: 2006 Cslq Uytjvk U Tuoiogt - manufacturer: SCM - Model: Reccord 142TUN

Condition: good (used), NUMERICAL CONTROL MACHINING CENTER o Brand: Biesse o Model: Rover 24 XL, CE Description:  CNC machining center for drilling and milling panels made of wood and wood derivatives, plastics and nonferrous alloys.  Precise and highly reliable. Particularly high quality components make the machine ideal for craftsmen and industries that want to improve the flexibility and quality of their product. The base consists of a single component made of electro-welded steelwork with thick steel sheets. TECHNICAL FEATURES: - Working range in X - Y - Z: mm. 6,170 x 1,380 x 180h - X - Y - Z axes stroke: mm. 6,635 - 1,780 - 250 - Speed X-Y-Z Axes: m/min. 100 - 100 - 30 - Work table with 10 bars - Trolleys per bar: 3 - Vacuum modules: 3 per bar - Pendulum machining up to 2,975 mm. - 2 independent working fields allowing simultaneous machining of 2 equal, mirror or different workpieces - Easy positioning of heavy workpieces and large panels with the raising device - Machining of the five faces of the workpiece - "Swan neck" machine - Milling unit at HSD - Air cooling - Inverter - Tool magazine: 1 to 10 positions - Drilling unit - Vertical drilling spindles in X=7, in Y=7 - Horizontal drilling spindles in X=2+2, in Y=1+1 - Integrated 120 mm blade. - Control system: PC-based NC 500 - Ease of programming - Importing files - Remote control panel/control console - Teleservice and video diagnosis: real-time solution - Automatic lubrication of guides - Vacuum pump: no. 2 x 100 mch Chip conveyor belt - Centralized suction hose - Suction ports: 1 x Diam. 250 mm. - Safety devices - Side strips to protect the unit - Perimeter guards with access door - Total installed power: Kw 25 - Compressed air consumption: NI/1' 400 Colq Uotuxa Hjytiogt - Operating pressure: Bar 6.5/7.5 - Air consumption for suction: mc/h 3816 - Machine footprint: mm. 8,300 x 4,020 x 2,730h - Machine weight: KG 4,100 + 600 Electrical panel - Machine documentation: operation and maintenance manual, software manual, spare parts catalog, wiring diagram, CE declaration of conformity.

Condition: as good as new (ex-display), Functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Cgjlq Usu Eg A Uoytist Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: good (used), Year of construction: 2010, operating hours: 12,741 h, Functionality: fully functional, machine/vehicle number: 0-250-21-1123, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 60 mm, I have for sale a vertical CNC BHX 055 Weeke . The machine worked for us at the Wholesale Board Company as a drilling machine and a bias milling machine now the time has come for a larger machine and therefore it is put up for sale . As of today it is already dismantled The price given in the ad is net price + 23% VAT Parameters : year of production 2010 working range x-3050 mm working range y- 850 mm working range z- 60 mm electro-spindle -1 pc Vertical drilling spindles 8 pcs Drilling spindles x-4pc Drilling spindles y- 2 pcs Cslqotqcbmo Uytijgt machine table pass-through sawing unit 100mm in x-axis work protection - full cab to the machine a set of tools and spare drive screw full software to work and create files in PL , English , German

Condition: new, Year of construction: 2025, The CORMAK NST2131129A CNC milling machining centre is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which is perfect for production on an industrial scale. Constant quality control and components used in the construction of the machine guarantee high quality machining of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexi, dibond, carbon, alucobond. Machine description The CORMAK NST2131129A CNC milling centre for loading/unloading has been developed for companies that prioritise high capacity, economic efficiency and machine reliability. This automatic nesting centre offers tremendous possibilities, especially in its most popular version, equipped with an innovative storage and pusher unit for the smooth loading and unloading of full-field boards and the efficient collection of finished parts on a specially adapted table. The CORMAK CNC router is capable of cutting several boards simultaneously in a single cycle, ensuring continuous production even under heavy loads. Attributes of this advanced machine include ensuring precise and very fast material processing: Automatic loading and unloading system via specially designed suction cups and transferring it, together with automatic basing, to the horizontal drilling zone Intelligent quick tool selection from a 12-unit revolver magazine Colq Uounw N Aoytisgt Powerful 2 drilling units and HQD and HSD spindles (industrial spindles with ceramic bearings) Pneumatic base pins, LCD control panel with control software included Large protective cover With retractable workpiece locating pins - 6 pieces Electronics by Siemens, Schneider and Phoenix Infeed and outfeed table In addition, the centre is equipped with an advanced nesting and toolpath optimisation algorithm for flexible production and efficient use of materials. A vacuum chip extraction system and a central lubrication system not only ensure cleanliness and operational safety, but also the long-term reliability of the machine. Overall, the CORMAK NST2131129A CNC milling machining centre is the ideal solution for companies looking for efficient, reliable and versatile material processing machines. Technical specifications Working area 2100x3100 mm Z axis 300 mm Construction: Arm - cast iron / table - welded steel Umbrella type tool magazine 12 pcs , ISO30 standard Tool length measuring sensor Automatic lubrication system for the XYZ axis INOVANCE servo drives ( 1.3kw for XY , 850w for Z-axis), with planetary gears Table - T-side / hybrid / infeed and outfeed Double layer, multi-hole vacuum work table in Bakelite with rubbers and screws for clamping, with positioning system Spindle power 9 kW Air-cooled HQD spindle (oil mist optional) Spindle speed 6000 to 24000 rpm Power supply 400 V, 3PH, 50HZ Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Vacuum material clamping, hybrid Vacuum pump 2x7.5 kW (optional) SYNTEC 60WE software Dimensions 10300x3600x2430 mm Weight 2050 kg Unloading and positioning of the machine on the customer's side. Power plug on customer side due to different 16A / 32A sockets

Condition: good (used), Year of construction: 1998, Functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm Cgjlqjt Dl U Ej Uytijt X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: incl. installation and commissioning with production-ready handover!

Condition: excellent (used), Year of construction: 2013, Manufacturer: BACCI Model: EVO JET Machine type: CNC machining center Year of manufacture: 2013 Technical data: X working area: 3400 mm Y working area: 200 mm Z working area: 100 mm Main motor: 7.5 kW 4 axes 5 axes 5-axis spindle CNC self-adjusting work tables Special material clamping system Pinion chuck OSAI machine control Electric cabinet cooling Independent Z axes - 2 Number of milling spindles - 4 Cslq Usrur Tieytisgt Number of revolutions max / min: 24 000 Construction with outrigger 2 tables Loading: conveyor belt External transport: conveyor roller Enclosed cabin CE mark

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,785 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 3 m/min, overall weight: 5,500 kg, spindle motor power: 8,000 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, The machine worked until the end in Sweden at the moment it is undergoing a service inspection. It has two milling units Cgelqeuzmyrs Uytist

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW Celq Uekvrxuoytiogt * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 3.7kW / 18000 rpm. inverter, air-cooled Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Power 400V Weight 450kg Cgolq Usiz Avvoytiet Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Transfer toothed rack (Z axis - ball screw) ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm Celq Uyotq Hkrjtisgt X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 21017403, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, controller manufacturer: BWO 900C, workpiece weight (max.): 8,000 kg, rotational speed (min.): 1,000 rpm, rotational speed (max.): 17,000 rpm, overall weight: 8,000 kg, spindle motor power: 12,500 W, number of spindles: 1, number of slots in tool magazine: 32, tool mount: 90 mm, tool diameter: 160 mm, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2024, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Celq Uyteuyl Npoiogt

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) Cjlq Uyspvai Dstiogt N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: new, Year of construction: 2025, CORMAK C2030 CNC milling machine is intended for machining and cutting wooden materials, particleboards, MDF, OSB, plywood, plastics, PVC, acrylic glass. Device mainly designed for usage in furniture and modelling industries. 2100×3100 mm working table. Cslq Uyoiz A Rqotisgt The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, Year of construction: 2022, NEW MACHINE OF OWN PRODUCTION - NATIONAL INDUSTRY PLAN 4.0 MACHINE COMPONABLE ON REQUEST ACCORDING TO YOUR PRODUCTION NEEDS Cgelq Uyou Hbhujtiet Numerical control machining center for automatic processing of standard (45 °) or reversible (90 °) frames Numerical control with programming on industrial PC 15 ”Touch screen - Windows 10 environment and complete NP-WOOD Software of all the parametric macros for the most common processes (straight cuts, 45 ° cuts, counter plates, hinges concealed, pivot hinges etc ...) The machine is completed by the relative loading and unloading benches. The loading bench is complete with motorized belts, for the automatic feeding of the machine. A special capture and locking unit, equipped with 4 pneumatic clamps, slides along the longitudinal axis (X) and firmly captures the first piece arriving from the loader desk, aligns it and then accompanies it through all work groups, without ever unlocking it, until the program is completed and then up to the unloading bench. The profile is aligned with the stop upwards (valuable side) and towards the stop side. The finished pieces, at the end of the cycle, are unloaded on a series of idle rollers and accumulate in descent. Groups present on the machine: Base + CN vice carriage (X axis) · Loading bench with motorized belts and retractable rollers for the alignment of the piece in the locking position . Blocking and handling unit of the piece by means of n. 4 pneumatic clamps (pliers) with automatic positioning according to the size of the workpiece. · Cutting unit + 45 ° kw 5.5 right side · Cutting unit -45 ° kw 5.5 left side · Cutting unit 90 ° kw 5.5 for straight cut · Group of holes + 45 ° with n. 3 spindles with 32 mm center distance for right-hand drilling · Hole group -45 ° with n. 3 spindles with 32 mm center distance for left-hand drilling · 90 ° vertical hole group (reversible frames) with n. 3 spindles with 32 mm center distance for cross-beam drilling REVERSIBLE · Group of holes horizontal / horizontal (reversible uprights) with n. 3 spindles with 32 mm center distance for drilling on the UPRIGHTS . Automatic anubating unit with loader . Automatic anubating unit with vibrating magazine 2-axis NC milling unit (Y-Z) kw 3.8 2-axis NC milling unit (Y-Z) kw 3.8 · Unloading bench with idle rollers Optional for the anuba group, the vibration warehouse All electrospindles are managed by Inverters Advantages of the work system: * Maximum precision, due to the movement of the panel by means of pneumatic clamps up to the moment of completion of the production process * Great sturdiness of all work groups which are mounted on fixed bearing structures. This guarantees quality during processing thanks to the absence of vibrations. * The cutting groups act with electric transversal movement, while the milling group is equipped with axes controlled by vertical (Z) and transverse (Y) NC. WORKING DIMENSIONS * Max profile width on bench 2300 mm * max profile width 230 mm * min profile width 60 mm AVERAGE PRODUCTIVITY considering the complete frame with anuba processing - 180 complete frames per shift of about 7 hours

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm Cgjlq Ujf Eyqqoytiet UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, Homatic PC 85 Power Control Numerical Control with WoodWop Software Working range in X axis mm 6000 Working field in Y axis mm 1650 - in case of milling up to mm 1750 N° 10 adjustable panel support bars for positioning the suction cups Loading and unloading aid system via 8 pneumatic bars positioned on each work bar Schmalz type suction cups adjustable for each bar with vacuum seal for fixing the panel during machining Positioning of the suction cups by means of a laser system assembled on the main head N° 1 vertical electrospindle with C Vektor axis with automatic tool change, cones type HSK F63, KW 11 Automatic tool change in 18 positions on the back of the machine Boring head with 27 spindles (4 kW) arranged as follows: N° 11 vertical in X axis N° 6 vertical in Y axis N° 6 horizontal in X Independent edge banding unit with 360° rotation on second Y axis with glue pot and pre-melter for granular EVA glue Applicable edges in rolls - PVC / ABS 0.4 - 3 mm Maximum working height in edging mm 60 Maximum applicable edge height mm 65 Internal radius min mm 30 (depending on the type of edge) External radius depends on the type of material used Rubberized pressure roller + rubberized pressure roller Lamp for panel preheating Edge trimmer N° 1 aggregate blade, diameter mm 200 (max) Cgslq Uysl Ikyustist No. 1 combined trimmer - edge scraper unit Edge holder magazine Front protection and safety system with carpets Perimeter protection grilles Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning the machine control Automatic lubrication system Vacuum pump

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm Colq Ujg Ngixjytijgt UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.