Used Drilling and milling for sale (116)

Condition: new, Drill Drill SERRMAC TCS E TC ( Cross Table ) New " CE " 3 years warranty Automatic descent High efficiency transmission and electronic speed variator by vector inverter. Tool cooling system Threading via inverter and complete with digital tachometer Threaded spindle axis for tool clamping CM4 Cross table mm 800 x 255 Drilling capacity on steel R50 mm ø 50 Tapping capacity on steel R50 mm M 26 CM4 Spindle Cone Spindle stroke mm 145 Spindle sleeve diameter mm 72 Automatic descent rpm 3 speed: 0.05 - 0.1 - 0.2 Automatic descent with electrom. clutch. 3 speeds: 0.05 - 0.1 - 0.2 mm/rev. Prismatic Column Table cross Inverter Transmission I Spindle speed rpm 45 - 2150 Motor power (380 V - 50 Hz) kW 3 T-slot size mm 14 14 Table cross: long run. X axis manual mm 585 Cross table: manual transversal travel Y axis mm 240 Dimensions (h x w x d) column mm 1.986 x 1.340 x 1.280 Weight Kg 780 Lhodpfxofh Si Uj Afken

Condition: excellent (used), Heidenhain TNC 124 control system X/Y/Z travel 450/260/120 mm W travel 450 mm Clamping area (L x W) 770 x 320 mm Permissible table load 100 kg Distance table to spindle nose (min. – max.) 0 – 110 – 560 mm Lodpfjwk Edpox Afkehn Feed rate X/Y 1 – 2000 mm/min Tool quick-change system SF 32 Speed range continuously variable 100 – 9200 rpm Drive power 5 kW Space requirement (W x D x H) 1500 x 1480 x 2330 mm

Condition: new, ELMAG gearbox milling and drilling machine MFB 30 Vario Lhodpfet Ef Diox Afken MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, it covers a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Taper arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 30 mm Tapping capacity M18 Milling capacity face milling cutter 80 mm Milling capacity end mill 20 mm Spindle holder (turning spindle) MK 3 Speed range 1 50 - 750 rpm Speed range 2 150 - 2250 rpm Infinitely variable speed steps Quill stroke 70 mm T-slots, width 14 mm Milling head stroke 370 mm Spindle projection 180 mm Milling head swivel range ± 90 ° Quill distance table 90 - 460 mm Milling table surface 700x210 mm Table travel X x Y 425 x 220 mm Motor power 1100 W Mains connection 230/50 V/Hz Cubature 700x210x460 mm Length x width 970 x 710 mm Height 1190 mm Weight 240 kg

Condition: used, Year of construction: 2009, x-travel 3.000 mm y-travel 2.500 mm z-travel 2.475 mm w-axis 800 mm rotary table Juaristi MG-12 Rotary table surface 2.000 x 2.500 mm T-slots 11 T-slot - width 170 mm table weight 8.000 Kg table rotation B- Achse – 0,001 ° Lodpju D I R Djfx Afkehn Control HEIDENHAIN i TNC-530 diameter of quill 130 mm speed 3.000 U/min tool taper ISO 50 DIN 69871/1-B swivelling +/- 2,5/2,5 Grad spindle drive 30 kW transmission ratio 2 speeds: 0-2.500 U/min boring spindle D`ANDREA UT5-800-S mm/min diameter 800 mm cross travel 250 mm Tools changer 30 pos. Internal cooling system 20 bar Chip coveyor Inkl. handwheel HEIDENHAIN HR-420 weight of the machine ca. 45 t dimensions of the machine ca. 9.800 x 7.320 x 5.500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platform for control panel - Chip Conveyor - Handwheel HEIDENHAIN HR-420

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Ljdpfx Afed H Hhzskshn

Condition: excellent (used), Year of construction: 1995, Fehlmann Picomax P51 DC in very clean condition Specifications: Lhsdpenpx Rtefx Afkjn X-axis 450mm Y-axis 260mm Z-axis 120mm W-axis 450mm Speed 50-9200rpm Table size 770x320mm Take-up spindle SF32 Machine power 10kW Machine dimensions 1500x1480x2330mm Machine weight 1300kg Accessories: Heidenhain digital Machine clamp Various milling attachments Machine books

Condition: new, Fervi T052/400VDA Milling drill. Lhsdpfeh Dbbgex Afkon Ready for delivery except sold. With automatic descent, choice of direction of rotation and belt drive rack spindle 1 ÷ 13 b16 drilling spindle attachment cm 3 cutter attachment cm 3 ø 27 mm refrigeration system Drilling capacity with pre-hole Ø 32 mm Milling capacity with insert cutter Ø 76 mm Milling capacity Ø 20 mm Head stroke 405 mm Morse taper CM 3 Column spindle distance 205 mm Max. distance between spindle and table 700 mm Spindle stroke 130 mm Manual vertical feed division 0,05 mm Sleeve Ø 75 mm

Condition: excellent (used), Year of construction: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Z-axis quill stroke 110 mm Machine head travel 450 mm Table spindle nose 0 – 527 mm SF 32 quick-change system Work spindle 2.9 kW Speed range continuously adjustable 50 – 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space required W x D x H 1.5 m x 1.35 m x 2.1 m Lodowkrp Espfx Afkohn Weight approx. 850 kg

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Lhedpet Ed Ersfx Afkjn Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg

Condition: new, - MK4 - 95/3200 to - Automatic feed on the X-axis - Rapid traverse on the X-axis - Automatic feed on the drilling spindle - Jog function - Digital display on three axes - Digital display of drilling depth - Drilling part is electrically height-adjustable - Drilling part can be tilted - Table 800 ×240 mm - Gear-driven - Cooling system - Protective cap Lhsdpfx Ajq Aawujfksn - Emergency stop - Relief - Documentation - 400V

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Lhsdpfxefu Ivze Afken Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Year of construction: 1975, condition: used, Manufacturer: DABROWSKA Type: BORING ROTATED TABLE & X AXIS Lhodpfx Afob Ufgmekon Technical characteristics: TABLE DIMENSIONS 1600x1600mm Stroke: 1500mm ON AXIS

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, We offer the CC 200, a high-performance CNC machine for the automatic cleaning of corners on PVC profiles – ideal for those seeking precision, speed, and versatility in window and door manufacturing. The machine is brand new and ready for use, designed to ensure fast processing and high-quality results thanks to its CNC system and fully automated operation. ✅ Main features: ✔ High-speed CNC system with 2 servo-controlled axes ✔ 7-position tool magazine for rapid tool changes ✔ Easy programming with Auto Learning system ✔ Ability to define and store multiple profiles and operations ✔ Suitable for standard profiles up to 200 mm ✔ Compact design fully compliant with CE regulations 📌 Technical specifications: Power: 7 kW – 380 V / 50 Hz Ljdpfjw Av Ntsx Afkshn Max stroke: 2100 mm Operating pressure: 6 Bar Weight: 1,026 kg Dimensions: 2250 × 2050 × 2050 mm

Condition: excellent (used), Control: Heidenhain TNC 310 With dividing head Travel X/Y/Z 500/250/160 mm Travel W 480 mm Clamping area (L x W) 885 x 320 mm Permissible table load 250 kg Distance table to spindle nose 0 – 605 mm Feed rate X/Y 1 – 2000 mm/min Lsdpfewkrn Ijx Afkohn Feed rate Z 1 – 1200 mm/min Tool quick-change system SF 32 Speed range (infinitely variable): 9200 rpm Drive power 5 kW Space required (W x D x H) 1850 x 2550 x 2400 mm

Condition: new, MAXION BT 25 FST Drilling and milling machine Accurate, handy and versatile drilling-milling machine. The very smooth running drive and a perfect clamping of the quill guarantee good surfaces when milling. The headstock can be swung out to the side. The cross table is precisely guided and accurately adjustable. Pitch 0.05 mm, clamping device for both axes. Full motor protection. Technical data: Spindle MK 3 tightening thread M 12 quill stroke 100 mm normal drilling capacity 30 mm spindle / cross table 80 to 450 mm table area 600 x 240 mm X- / Y- travel 350 / 160 mm T-slot width 14 mm column diameter 110 mm total height max. 1.920 mm weight 340 kg Motor pole-changing 0,8 / 1,5 kW Mains connection 400 V / 50 Hz Spindle speeds infinitely variable 80 - 1,400 min-1 80 - 1,400 min-1 Ledogv I Ucspfx Afkehn 120 - 2,160 min-1 120 - 2,160 min-1 160 - 2,800 min-1 160 - 2,800 min-1 Scope of delivery: Base cabinet with door, cross table, pull bar, quill clamp, Fine feed Additional accessories / options: Tapping device, Digital drilling depth display, Motorized height adjustment, Electric cooling device, Anti-rotation device, Height adjustment and clamping from the front, Cutter chuck, Collets, Chip tray, Digital display table axes, 3 drilling feeds AV, Spindle SK 30 with M12 (DIN 2079), Drilling packages.

Condition: new, - MK4 - 95/1600 to - Inching function Lsdpfx Afsk Dqzijkshn - Drill part is height adjustable - Drill part can be swivelled - gear driven - protective cap - Emergency stop - Documentation - 400V

Condition: excellent (used), Digital display Table surface 800 x 900 mm Cross stroke table 1200 mm drilling depth 700 mm vertical stroke 900 mm Lodpfof T Rafsx Afkehn Tool holder ISO 50

Condition: used, Accessories available. Fehlmann cross table KS 240 Lsdpfx Asci Auvefkehn Drilling quill digitalized table size 530 - 240 mm X - path 280 mm Y - path 180 mm Speed electronic, stepless with potentiometer 132 - 4500 rpm

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg Ledpecyaq Esfx Afkjhn

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Ljdpec Ndntsfx Afkohn Weight 800 kg

Condition: excellent (used), - Digital display Heidenhain - Accessories available Travel paths: X – path 280 mm Ljdpev E D Ttofx Afkshn Y – path 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm

Condition: excellent (used), Control : Heidenhain TNC 124 travel X/Y/Z 450/ 260/ 120 mm travel W 450 mm Clamping surface (L x W) 770 x 320 mm Ljdpfx Afsipmmuekehn Permissible table load 100 kg Distance table - spindle nose (min. - max.) 0 - 110 - 560 mm feed speed X/Y 1 - 2000 mm/min Tool - quick change system SF 32 Speed range infinitely variable 100 - 9200 rpm Drive power 5 kW Space requirement (W x D x H) 1500 x 1480 x 2330 mm

Condition: excellent (used), Control : Heidenhain TNC 426 Dimensions Space requirement (WxDxH) 1.92x1.85x2.4 m Weight Weight approx. 2'400 kg Working range travel lengthwise X-axis 500 mm Transverse travel Y-axis 255 mm Quill stroke (controlled) Z-axis 147 mm Quill stroke (manual) Z-axis 160 mm Machine head travel W-axis 500 mm Feed rates Speeds: Rapid traverse - X- and Y-axis 1-11,000 mm/min - Z-axis 1-6,000 mm/min - W-axis 1-3,600 mm/min Feed forces - X- and Y-axis 6'500 N - Z-axis 8'000 N Rapid traverse - X- and Y-axis 11 mm/min - Z-axis 6 mm/min Displacement measuring system Direct measuring system via linear scale X / Y / Z axis Resolution Indirect measuring system via rotary encoder Z axis Resolution in X-, Y-, Z- and W-axis 0.001 mm Accuracy of position tolerance P axis(es) X / Y 0.005 mm Position spread Ps axis(es) X / Y 0.003 mm Z / W 0.005 mm Table clamping surface (lxw) 885 x 320 mm Working area T-slots: - Number 5 - - Width 12-H8 mm - Spacing 50 mm Permissible table load 250 kg Table height from floor 1040 mm Distance table-spindle nose (min-max) 0-120-620 mm Ljdpfx Aetp S R Hsfkohn Horizontal projection 300 mm Work spindle Quick-change tool system SF 32 - Hydraulic tool change via push buttons - - Repeat accuracy 0.002 mm - Changing time (manual) approx. 5 sec Speed range (infinitely variable) 50-9,000 rpm Drive power 7.6 kW Max. Torque 65 Nm Cutting capacity Drilling capacity ø 25 mm Thread cutting M 20 - Shuttering Semi-shuttering with sliding doors - - Coolant Coolant: Lubrication - External tank, capacity 100 l - Pump flow rate 75 l/min Central lubrication system Vogel

Condition: excellent (used), Year of construction: 2002, Contouring control : Heidenhain TNC 310 Accessories available Working range X-way 500 mm Y-way 400 mm Z-way 400 mm Main drive Speed continuously programmable 20 - 4'500 rpm. tool holder SK 40 Work table Drive B/C-axis Manual Clamping surface ø 700 x 500 mm Groove distance/size 63/14H7 mm Rotation range 360 Swivel range + 95 / - 10 Dimensions Length 1800 (750 control) mm depth 1800 mm Machine weight 2600 kg Lsdpfx Aop H S Uxofkehn

Condition: excellent (used), Heidenhain digital readout. Fehlmann cross table: KS 255. Accessories: available. Working range: Quill stroke Z-axis 110 mm Machine head travel 450 mm Table spindle nose 0 - 527 mm Quick-change systems SF 32 Work spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Lodpfevbzlrsx Afkohn Clamping surface 255 x 550 mm Dimensions and weight: Space requirement W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg