Used Edgebanders for sale (571)

Condition: ready for operation (used), Working height: 60 mm Dkslqjv Tz Haozv Ersl Pneumatic guillotine Glue dosage adjustment Glue applied to the edge Milling machine Brand F13 Top/bottom milling High-speed motors Profile milling Maximum height: 70 mm Year of manufacture: 1998

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Dkolevqbh Eeqzv Erjl

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0-200-24-6626, Hello, we are selling our edge banding machine from year 2002. Regular maintenance was carried out by Homag. It was overhauled in detail in 2018/2019 (milling cutters etc. like new). After the new machine in 2021, we kept this machine as a spare. We should sell it as soon as possible due to urgent space requirements. We are selling it including Ligmatech return System (ZHR 05/L/1005/S Production year: 2001) The machine is functional but may require fine adjustments and proper initial maintenance. The information contained herein is written to the best of our knowledge and belief. This machine is a used machine. Any problems after purchase are not covered by the warranty. Kind regards Dolqzov H At Ijv Erekl

Condition: excellent (used), Year of construction: 2015, Feed 16-20m/min Length 9365mm Workpiece Thickness 8-60mm Edge Material Coil: 0.3-3mm Automatic Adjustment Infeed Fence Sliding carriage Separating Agent Spraying Unit Delqzv Eov Ak Swjrekl Pre-Milling Workpiece Pre-Heating PU Package Including PU60/65 Gluepot and Robatech PU Pre-Melter 6 Coil Magazine Snipping Unit HL81 Chamfer / Straight Pre-Trimming Unit BF10 Profile Trimming Unit FK11 Grooving Unit SF21 for grooving and rebating top/bottom/lateral Profile Scraper PN10 Glue joint scraper Cleaning Agent Spraying Unit Buffers PowerControl PC23 Homag Quality Kit EcoPlus Hand Operation for Run-in-mode Preinstallation for Boomerang TFU140 Sub Assembly small parts Foil and High Gloss Package CE Marking

Condition: used, Felder MG 560 Edge thickness 0.4 - 5 mm Control panel with LCD display and keypad Pre-trimming unit for joining before the gluing section Automatic edge magazine for roll materials - 3 mm Strip edge banding with individual feed Teflon-coated glue pot for EVA + PUR hot melt adhesive granules Short heat-up time Workpiece height 8 - 60 mm Finely adjustable glue roller Gun shear up to 64 mm material height for pre-trimming roll materials Printing unit Trimming unit for roll and strip materials, 45° working angle and 0°/20° bevel trimming Flush radius and bevel trimming Radius scraper Surface scraper Year of manufacture 2009 Dsljvy T Nyjqzv Erekl Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION Ex works

Year of construction: 2009, Condition: like new (used), Glue tank Djlqzv Eeidrd Dsrskl Guillotine Cutting the front / back of the ball Milling up / down cutters R2 Material feed 11 m / min European CE certificate

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Delqev Szt Dszv Erskl Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Single-sided automatic edge banding machine with CNC control 10" touchscreen Industrial conveyor chain 1"1/4 Joining trimming unit FI-502 Glue application unit VC-710 Cross-cutting unit IN-801 Flush trimming unit RS-100, top and bottom 2 motorized multifunctional units: CR-202 profile trimming unit (FAST system with 4 positions as standard) RBK-503 NC scraper unit, 2 positions RCC-701 flat scraper Dolqzvjv R Nk Uj Erskl Workpiece thickness 10-65 mm Max. workpiece height with profile trimming unit (depending on profile) 35-65 mm Edge thickness for rolls 0.4-3 mm Edge thickness for strips 0.4-22 mm (depending on unit) Min. workpiece length 140 mm Min. workpiece width (at length 140 mm) 85 mm Min. workpiece width (at length 250 mm) 50 mm Feed speeds 10-14-18-20 mm Central extraction connection 200 mm Extraction connection for gluing 80 mm Extraction connection for joint milling 120 mm Glue container capacity approx. 3 kg Heating time at 1/2 fill approx. 10 min. Length 6000 mm Width 1780 mm Height 1770 mm Machine does not include the workpiece return device shown in the pictures. Availability: Short term Location: Röllbach

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, total length: 7,145 mm, edge thickness (max.): 8 mm, total height: 1,687 mm, height adjustment type: electric, input voltage: 400 V, HOLZ-HER SPRINT 1327 MULTI edge banding machine with special equipment For sale due to expansion Available from September 2025 New price over €80,000 excluding VAT. VAT - PUR processing is very easy - 21.5" 16:9 color touchscreen, efficient machine setup and changeover - Air cushion table BS701 (230 V / 400 V, 50 Hz) including long infeed guide - Motorized adjustment of the long infeed guide - Nesting sensor shoes vertically below - iTronic - Print and adhesive quantity control - 3 LED lights for the infeed area/post-processing area - Barcode scanner - ECO MODE energy saving mode - Motorized pressure bridge adjustment Dslqzvjwayq Ns Erskl - Electrical system for continuous feed 400 V / 50 Hz, 2.2 KW Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: max. 3 mm with FF302 unit, max. 8 mm without FF302 unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable 10 - 18 m/min - 1802 jointing milling unit (2 x 2.0 kW, 200 Hz, 12,000 rpm) - Diamond milling cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1901 SYNCHRO edge feeder - Glu Jet GJ301 automatic NC glue application station - DW 501 MOT printing unit - 1918 pneumatic trimming unit (60 mm) - FR502 MOT6 MULTI multifunction milling unit - Corner rounding unit FF301 MOT1 - Scraper unit ZK502 MOT6 MULTI - Flat scraper FK701 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) - Spray unit TR501 for the inlet and outlet areas - Spray unit AM501 after the printing unit

Condition: excellent (used), Year of construction: 1996, A Hebrock edge banding machine is for sale. The machine is in good condition and can be inspected and tested on site. About the machine: Hot-cold process, one-sided right Workpiece width min. 90 mm Workpiece thickness 10 - 50 mm Workpiece length min. 260 mm Edge material thickness 0.5 - 5 mm Edge material height max. 55 mm Edge material length for fixed dimensions min. 350 mm Edge material overhang at the top and bottom max. 2.5 mm Feed approx. 11 m/min Fast heating adhesive container with driven application roller - Cutting unit - Flush saw unit Dolovmir Doqzv Erskl - Milling unit - Buffing unit Accessories: Granules, accessories for solid wood, etc. You will receive an invoice with VAT shown. The price is gross, i.e. €2500.00 net. If you have any questions or are interested, please get in touch! Your JG Holztechnik team from 26188 Edewecht.

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, Machine still in operation functional from the carpentry shop location Dkelqzsvx N H Eov Erol fixed price

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,555 h, machine/vehicle number: CA.03.013.12, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Djlqzv Ejng H Uverskl Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: used, machine/vehicle number: 006374, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Doljl Txv Eeqzv Erskl Operating Units: 10 nr

Condition: used, Year of construction: 2016, Functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm Dkolqzv Eowb Ha Tersl – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: very well maintained/refurbished in a workshop With manual pressure bridge adjustment With central lubrication of the chain guide rail manually via grease nipple - Edge thickness for rolls 0.4 - 3 mm (depending on material) - Edge thickness for strips 0.4 - 8 mm (depending on material) Edge cross-section max. 6 x 42 mm Edge height max. 65 mm Workpiece thickness 6 - 60 mm Workpiece width min. 160 mm (without corner rounding 1832) Feed speed 10 m/min. - Edge thickness max. 6 mm - PLC control (program-controlled) - Glue height max. 60 mm - Pre-milling unit 1801 in up- and down-feed (with diamond tools) Automatic edge feed 1903 Transport of rolls and strips Maximum load capacity 40 mm Rolls; Max. edge thickness 3 mm (depending on material) - Adhesive application station cartridge 1906 M Automatic glue height adjustment (tactile nozzle) Processing of EVA and PUR adhesives Adhesive in cartridges or granules Processing of neutral or colored adhesives Adhesive application using nozzle technology Heat-up time 3 min. Incl. automatic reloading Incl. manual flushing function via separate flushing channel Magazine capacity: 1 cartridge including pressure regulator Dslqzvsvymgrj Erskl for regulating the cartridge contact pressure Automatic adhesive temperature reduction over time - 1912-3 pneumatic pressure unit First roller driven with pneumatic plunge control 2 conical pressure rollers - 1918 trimming unit (60 mm) pneumatically pivotable to 10° - 1827 MOT4 multi-function milling unit for milling the upper and lower longitudinal edges with motorized positioning of the horizontal guides Tracer shoes with motorized axial positioning of the milling motors including pneumatic adjustment (separate top and bottom) for flush radius milling including blow nozzles Flush milling 3 mm radius Bevel tilt 0-15°, manually (for max. edge thickness 6 mm) Pneumatic tilting device for milling unit 1827 MOT 4 Pneumatic tilting to a 15° bevel from the control unit - Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang, e.g., for plastic edges - Corner rounding unit 1832 Corner rounding function for up to 3 mm edge thickness Tool thickness 12-60 mm including automatic lifting device (max. Feed speed 10 m/min.) - Radius scraper with motorized adjustment (MOT 2) incl. pneumatic adjustment (separate top and bottom) Chip catcher - Flat scraper 1964 for removing adhesive residue for a clean bond joint top and bottom application-controlled with extendable workpiece support Availability: Short-term Location: Bavaria

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Dkjlqzvjv H E S Ts Ersl Application Types Edge Banding

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description with hot melt adhesive indication on the workpiece for edge material up to 3 mm 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit, maintenance-free, coated glue pot, HF - trimming station (16,000 rpm) for front and rear edge overhang, HF - trimming station (16,000 rpm) with interchangeable plate cutter (combined version) and fine cutter adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged Control panel, double roller top pressure beam, unit viewing window from the rear of the machine and operator side, PLC control including touchscreen. Technical data: - Feed speed 10 m / min. - Panel thicknesses from 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point - pneumatic cutter adjustment 1 piece Switching radius - flush / chamfer for the combination milling stations The changeover to chamfer or flush is done manually by flipping the stop flap in the machine. Cleaning station (buffing) 1 piece Corner rounding cutter 1 piece including combination tool and pneumatic adjustment chamfer / radius Maximum workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 piece including pneumatic excavation device Radius R 2.0 mm Surface scraper 1 Unit with pneumatic application control. Glue station change system including a second glue pot and downward glue outlet. 1 unit for quick color changes. Grooving unit horizontally mounted in the edge. 1 unit including pneumatic lifting device and grooving tool. Separate extraction system for the joining unit. 1 unit directly mounted on the joining unit, vertically upwards, d=80mm. For optimal extraction performance, highly recommended from AKV 3005 DK-F. Ball bearing for corner rounding cutter 24.1mm. 1 unit. Ball bearing for corner rounding cutter 24.2mm. 1 unit. 0.37 kW interchangeable motor for corner rounding cutter. 1 unit with quick-change device including radius cutter R 1. Interchangeable spindles (1 set = 2 units). 1 unit. 1 set of quick-change motors for longitudinal processing, top and bottom, including tool R 1. Compressed air consumption: 100 - 150 l/h. Storage location: Supplier Delqewblctezv Erjkl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 224 h, Functionality: fully functional, machine/vehicle number: 200.11.006.14, height adjustment type: mechanical, input voltage: 400 V, power: 11 kW (14.96 HP), operating pressure: 6 bar, Used Format4 Perfect 608 x-motion edge bander from 2014, first owner since 2016, now back for sale after an upgrade to a new Format4 edge bander. Very good condition, not many running meters, well maintained, serviced. Works and can be checked/tested with a test run in our warehouse! Jointing milling Replaceable glue pot Infrared heating lamp Cut-off saw with 2 motors / pneumatically adjustable tilt Combination milling unit for radius and flush, motor-adjustable Radius scraper unit, motor-adjustable Flat scrapers, pneumatically controlled Djlewatftoqzv Erekl 10.4" touchscreen for the 8 controlled adjustment motors, programs, etc. Lighting in the machine hood Extendable support Extremely good condition!! Functional and available immediately.

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Dolqzvsu T Tuwe Erokl Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, edge thickness (max.): 8 mm, overall weight: 1,300 kg, Flexible edgebander OLIMPIC K360 HP TER1 (SCM Group) in rich configuration suitable for custom made production. Machine is equipped with MULTIRADIUS aggregates (ABS 1mm, ABS 2mm + thin edges + solid wood). Dkolou Skmkeqzv Ersl Main technical parameters: - feeding speed: 11 m/min - panel thickness: 8-60 mm (max. 45 mm with rounding) - max. solid wood stripe: 8 mm - edge counter: only 99 km ! - weight: 1.300 kg Equipment and configuration of the machine: - control panel STARTOUCH (color LCD screen 30 cm) - internal lightning of working area - electronic top pressure adjustment - electronic adjustment of the entry guide for variable stock removal (EasySize) Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter diam. 100 mm, each motor 1,5kW) - glue pot with roller "VC-VM" (glue pot with quick-release system, EVA/PUR glue) - 2 pieces !!! - pressure rollers (3 pcs) with timed intervention - 2 motor end cutting unit "K-2" with 2 pairs of sawbladed (straight and radius) - radius trimming unit "R-HP" R1 mm, R2 mm + thin edges + solid wood 8 mm (each motor has: 2 electronic axis with bruhsless motor) - 1 motor rounding unit "ROUND 1" MULTIDEDGE R2mm + thin edges (1x electronic axis with brushless motor), diamond tool - radius edge scrapers "RAS-HP" R1 mm, R2 mm (each motor has: 2 electronic axis with bruhsless motor) - cleaning spray - glue scrapers "RC-V" - brushes"SP-V"

Condition: used, Year of construction: 1997, Second hand machine Year of manufacture: 1997 Condition: well maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feed for roll and strip material, automatic 1901 Adhesive application cartridge 1906 with sensing nozzle Printing unit pneumatic, motorized adjustment to edge thickness 1926 cross-cutting unit 2-motor, pneumatic swiveling 1918 Trimming unit rigid up to 30 mm 1962 Milling unit MOT 5 with multifunction flush, radius, chamfer 1966 Radius scraper 1927 corner copying 1983 Surface scraper 1964 Buffing unit 1944 Blowing nozzles Technical data: Dkeljmxp I Hjqzv Erjl Workpiece thickness min./max.: 6/60 mm workpiece width min. 60 mm workpiece length min. 140 mm glueing thickness max. 13 mm weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short term

Condition: ready for operation (used), Year of construction: 2003, This HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander was manufactured in 2003. Consider the opportunity to buy this HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander. Contact us for further details. Application Types Edge Banding Djlqzvev Nb A Ts Erokl

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Dkolsvymdqeqzv Ersl Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Minimum workpiece width approx. 75 mm Workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tools height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cut-off unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Radius scraper unit with blow-off device and extraction system Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual valve mounted on the machine Dkslqjv Nta Rezv Erel Availability: Short-term Storage location: Hüllhorst

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: very well maintained/workshop overhauled With manual pressure bridge adjustment With central lubrication of the chain guide rail manually via grease nipple - Edge thickness for rolls 0.4 - 3 mm (depending on material) - Edge thickness for strips 0.4 - 8 mm (depending on material) Edge cross-section max. 6 x 42 mm Edge height max. 65 mm Dkslev Ntc Ssqzv Ersl Workpiece thickness 6 - 60 mm Workpiece width min. 160 mm (without corner rounding 1832) Feed speed 10 m/min. - Edge thickness max. 6 mm - PLC control (program-controlled) - Glue height max. 60 mm - Pre-milling unit 1801 in up- and down-feed (with diamond tools) Automatic edge feed 1903 Transport of rolls and strips Maximum load capacity 40 mm Rolls; Max. edge thickness 3 mm (depending on material) - Adhesive application station cartridge 1906 M Automatic glue height adjustment (tactile nozzle) Processing of EVA and PUR adhesives Adhesive in cartridges or granules Processing of neutral or colored adhesives Adhesive application using nozzle technology Heat-up time 3 min. Incl. automatic reloading Incl. manual flushing function via separate flushing channel Magazine capacity: 1 cartridge including pressure regulator for regulating the cartridge contact pressure Automatic adhesive temperature reduction over time - 1912-3 pneumatic printing unit First roller driven with pneumatic plunge control 2 conical pressure rollers - 1918 trimming unit (60 mm) pneumatically pivotable to 10° - 1827 MOT4 multi-function milling unit for milling the upper and lower longitudinal edges with motorized positioning of the horizontal guides Tracer shoes with motorized axial positioning of the milling motors including pneumatic adjustment (separate top and bottom) for flush radius milling including blow nozzles Flush milling 3 mm radius Chamfer tilting 0-15°, manually (for max. edge thickness 6 mm) Pneumatic tilting device for milling unit 1827 MOT 4 Pneumatic tilting to a 15° chamfer from the control unit - Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang, e.g., for plastic edges - Corner rounding unit 1832 Corner rounding function up to 3 mm edge thickness Tool thickness 12-60 mm including automatic lifting device (max. Feed speed 10 m/min.) - Radius scraper with motorized adjustment (MOT 2) incl. pneumatic adjustment (separate top and bottom) Chip catcher - Flat scraper 1964 for removing adhesive residue for a clean bond joint top and bottom application-controlled with spray device 1856 at the inlet (release agent) and outlet (cleaning agent) with extendable workpiece support Total length 4630 mm Availability: Short term Location: Bavaria