Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Dsb Hhpev Aycxegbskl Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Year of construction: 2006, Condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. Debogfm Rrs Hhpgbokl We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation

Condition: used, TECHNICAL DETAILS - Table dimensions : 680 x 450 [mm] - Max. part dimensions : 1000 x 550 x 220 [mm] - Max. part weight : 750 [kg] - Strokes X,Y, Z : 350 x 220 x 220[mm] - Strokes U,V : 350 x 220 [mm] - Wire diameter : 0,1 à 0,33 [mm] - Max. wear : +/- 30 [°] - Three-phased supply tension : 400 [V] - Dimensions ( floor surface x height) : 3490 x 23254 x 2410 [mm] - Weight : 2700 [kg] - Welding hours : 350 [h] Dkeb Hhpgov Anncobel EQUIPMENT - CNC CHARMILLES - Touch screen LCD 19' TFT - AC CAM EASY 4.0 license - Remote control - Automatic threading and re-threading - Thermo stabilisation - Anti-collision - Large coil option : 16 and 25 [kg] - Central filter unit with 4 filters - 2 de-ionisation unit - CSW 900 cooling unit - Prearranged for rotary table

Year of construction: 1991, Condition: used, Vertikal EDM machine with accessories as shown in the pictures. Djb Hhpsl Sm Nlegbekl

Condition: good (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Incl. radiator Djb Hhsvkdh Ijpgbekl Incl. B-axle Hirschmann

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: BM-LHV, -NEW- Wire EDM levelling head with vice for round or rectangular workpieces up to 175 mm. - Levelling head enables stable and precise alignment in 3 axes. - Levelling head can be mounted directly on machine table or on reference element (System 3R, Erowa, Hirschmann). Dsb Hev A T Izshpgbekl - Dovetail mounting of vice allows height adjustment. - 4x90° indexing of vice upon request.

Condition: excellent (used), 24 pieces Chuck adapter 20mm shank, equivalent to 3R-653 Dob Hhpgevgw Utsbekl Mini holder chuck adapter 3R-653 for 20mm shanks Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. pull rod 3R-605.1E

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Die-sinking EDM machine GF AgieCharmilles Spirit 4 Year of construction 2008 Travel (X/Y/Z): 700 x 500 x 400 mm Max. Workpiece dimensions: 920 x 550 x 370 mm Max. Workpiece weight: 2000 kg Distance table - quill: 215 -615 mm Bath level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 of your choice Incl. 28-fold electrode changer Max. Electrode weight: 80 kg Incl. C-axis with U=0-40 rpm Dob Hoq N Ap Sohpgbokl Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine is cleaned, serviced and tested by us after receipt of order. We are happy to offer you the following additional services and products: - Commissioning - transportation - training - Clamping devices - Dielectric - Cooling unit

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY Dkeb Hhouhq Rlepgbel - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 1266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Condition: good (used), Year of construction: 1999, X Axis 410 mm Y Axis 260 mm Z Axis 170 mm Max. workpiece length 580 mm Max. workpiece width 350 mm Max. workpiece height 170 mm Dkjb Hhpgevbbwnobsl Max. workpiece weight 100 kg CNC Type Worktank length 580 mm Worktank width350 mm Worktank height170 mm

Year of construction: 2004, Condition: ready for operation (used), Working range X/Y/Z: 500mm/350mm/426mm, U-axis: +/-30°, V-axis: +/-70mm, resolution: 0.0001mm, positioning speed: 3m/min, tolerance for new machine: 4µm. Workpiece dimensions X/Y/Z: 1050mm/650mm/420mm, max. workpiece weight with/without bath: 400kg/800kg, wire diameter range: 0.2mm-0.33mm, wire speed: 60m-300m/min, weight: approx. 4000kg, control: AgieVision 5. Including a mobile electronic manual control unit with AgieJogger, DA Progress integrated dielectrum unit, 65A generator and wire threading device. Documentation available. On-site inspection is possible. Dkjb Hhpsvtb Htjgbel

Condition: good (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 1,550 mm, total width: 1,800 mm, total length: 2,050 mm, A Charmilles Technologies die-sinking EDM machine of the Roboform 30 type is for sale The machine is fully functional and ready for immediate use Technical data Year of manufacture: 1995 X-path: 350 mm Y-path: 250 mm Z-path: 300 mm C-path: 360 ° Measuring resolution: 0.5 µm Working basin: 370*940*590 mm Capacity: 200 l Table: 500*400 mm max workpiece weight: 500 kg max workpiece dimensions: 350*750*525 mm Mains supply: 240 V/50 Hz/10 kA Dimensions: 2,050*1,800*1,550 mm Weight: 1870 kg Transportation and loading can be arranged on request, at an extra charge. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Dob Hsuy T Aqshpgbskl PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), Year of construction: 2006, Status: overhauled Control: Mitsubishi - 64 bit CNC Dsb Hhpgstxnybjbekl Generator power: 70 Ampere - multipulse Travel (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 13-fold pick-up linear changer Work bowl (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: used, TECHNICAL DETAILS Deb Hhsuhq Rfjpgbekl - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Dkjb Hjuyk Rlehpgbol

Condition: used, TECHNICAL DETAILS - Strokes X x Y x Z : 350 x 250 x 350 [mm] - Max. part dimensions : 650 x 580 x 250 [mm] - Max. part weight : 400 [kg] - Machining intensity : 72 [A] - Tools magazine capacity : 28 - Dielectric volume : 415 [l] - Machine floor space : 2.689 x 1.855 [mm] Dob Hhsuhcbijpgbokl - Machine height : 2.593 [mm] - Machine weight : 3.000 [kg] - Welding hours : 39.554 [h] EQUIPMENT - CNC AGIEVISION with color screen LCD : 10,4 ['] - Deported electronic crank-handle - Axis C - Spindle chuck : EROWA - Automatic retractable tank - Integrated filtration : DAI 2

Year of construction: 2002, Condition: ready for operation (used), Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available. Dksber Nd Ene Hhpgbel

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading Djb Hsuhcbcjhpgbokl

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Dob Hju Ilbushpgbokl

Condition: used, TECHNICAL DETAILS - Table dimensions : 900 x 600 [mm] Dsb Hhsuhca Sopgbskl - Dielectric capacity : 1200 [l] TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Year of construction: 1997, Condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Debsvc Ha Rj Hhpgbekl

Year of construction: 1994, Condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/350mm, tank dimensions X/Y/Z: 670mm/600mm/250mm, table dimensions X/Y: 800mm/600mm, max. workpiece dimensions X/Y/Z: 1070mm/735mm/450mm, max. workpiece electrode weight: approx. 400kg/100kg, speed: 820mm/min. Dimensions X/Y/Z: approx. 2000mm/2500mm/3000mm, weight: approx. 3000kg, control: Agiematic T. Documentation available. Dkob Hhpgstu I Umjbol

Year of construction: 2017, Condition: ready for operation (used), X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation. Deb Hhperici Dogbjkl

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Dkeb Hhpgjvb Hbrsbjl

Year of construction: 1992, Condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Dksb Hhpep R R Idsgbsl