Used extruders & extrusion lines for sale (226)

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Hjdpjxlcfkefx Ad Defp Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2009, condition: excellent (used), max in operation for 4 years die 700 mm dosing 1+3 components NGR trimming recycling Hfjdpfx Aoxu N Iqjd Djp - including Futec optical flaw inspection system manufacturing year 2009 machine is designed for low-gel film production for the semiconductor industry - including Fuji dual turret automatic winder manufacturing year 2009

Year of construction: 2010, condition: used, Designed for COEX cast film production. Processing of thermoplastics within a temperature range of 150–300°C. The system can be operated with the following configurations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - Monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output: max. 900 kg / h Main extruder: 105/33 L/D, max. 650 kg / h Co-extruder: 90/33 L/D, max. 250 kg / h Net film width: 800–1400 mm Thickness: 25–530 µm Production speed: 8–150 m/min Roller width: 1600 mm Max. roll weight: 2000 kg Version with air knife and vacuum box One gravimetric dosing unit with 3 stations per extruder Each extruder equipped with melt pump and 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Hfjdpfexl Uh Dox Ad Dsp Non-contact thickness gauge for automatic die with automatic transverse profile control; Beta Controll Corona pretreatment on both sides (also selectable for one side; max. 6,000 W) by AFS WINDING UNIT FROM “SML Co.” Automatic turret winder with automatic splicing Max. finished film width: 1600 mm Max. winding diameter: 1000 mm Turret winder for 6" winding shafts

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 Hfsdpfjxiy R Esx Ad Dsp The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: F96172.1, power: 57 kW (77.50 HP), input voltage: 400 V, Equipment: documentation/manual, I am selling a Paul Muller ELK 60-28 D extruder. We produced PVC material on the extruder. The chamber and screw are in very good condition. The machine did not show any problems during production; production was consistently within a 0.2mm tolerance. The machine is currently disconnected and stored in an air-conditioned warehouse. Hedoxm Sbkepfx Ad Dsfp

Condition: like new (used), Year of construction: 2023, power: 255 kW (346.70 HP), ø 5-50 mm; 30 m/min 1.5 Kw Core diameter 400-1100 mm, collar width 100-400 mm. Many extras Hfodpouu H Emofx Ad Djp

Year of construction: 1994, condition: used, functionality: fully functional, machine/vehicle number: 8084/77/30, Vobau saw for 800mm PVC profiles Hfsdpfxexgh Uas Ad Dsp

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Hsdpfxjpah U Te Ad Defp Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 2004, condition: excellent (used), functionality: fully functional, SICA SOCKETING MACHINE BA.2F.1T. 63-315 Application: KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 2004 1 socket per cycle Socket tool: 160x4.6 The socketing machine is in very good condition, still in operation, and will be removed from production in 3-4 months. Hjdpfx Adsxiy Nuo Dofp

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15, IDE saw 800 mm Hjdexgh Tcepfx Ad Dsfp

Condition: used, Year of construction: 1996, functionality: fully functional, IDE haul-off unit 300 mm Hedpfx Asxgh R Isd Dofp

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 124, IDE Haul Off 500 mm Hfodpfoxgh Ruex Ad Dsp

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 245, IDE haul-off unit 300 mm Hedpoxgh N Dsfx Ad Dsfp

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 113, IDE haul-off unit 300 mm Hjdpfxoxgh Nqs Ad Defp

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 1006882, Soft PVC Coextruder Hsdjxgh Itepfx Ad Defp

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 10061195, Soft PVC Coextruder Hfedjxgh Imepfx Ad Djp

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Hsdexgh H Aspfx Ad Defp

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Hedpfx Adexgh Dzs Dofp

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Hfsdjxghz Hjpfx Ad Dop

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Hfodpexghy Nefx Ad Dep

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Hfodpfsxghxrox Ad Dop

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 8084/77/10, Haul-off 350 mm Hedpfx Asxghq Ijd Dsfp

Year of construction: 1994, condition: used, machine/vehicle number: 8084/77/01, Caliber Table Profile Extrusion Hfedpfexghqhsx Ad Dep

Year of construction: 1988, condition: used, machine/vehicle number: 3509, Bandera Caliber table Hedpoxgdxnofx Ad Dofp

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 7001296, Greiner Caliber table Hfodpfx Adjxgdp Hs Dep