Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Fobvm Iustu Il Tsfsgb Honing device Wet sanding device

Condition: used, Cup Grinding Machine Manufacturer: Delta Type: LF-350 Grinding length: approx. 360 mm Grinding width: approx. 155 mm Max. grinding height: approx. 280 mm Magnetic clamping surface: 350 x 150 mm Drive power: approx. 3 kW Grinding spindle speed: approx. 2840 rpm Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Z-feed: manual Fsbvmsv Tqugo Iufsgb Grinding movement: manual Equipment: Magnetic table Grinding wheel Grinding wheel protection Splash guard enclosure Space required: 1200 x 1200 x 1800 mm (L x W x H) Weight: approx. 450 kg The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale. The purchased item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, body, or health.

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Fgsbvm Iuouuik Sefeb Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: used, Year of construction: 1980, grinding length 440 mm centre height 125 mm centre distance 400 mm grinding wheel size ø400 x 50 x 127 mm turning speed range - grinding spindle 1500 -2420 U/min turning speed range - power take off spindle 30 - 640 U/min table speed -stepless- 0,05 -5,5 m/min spindle bore 28 mm grinding spindle - swivable +/- 45 ° dimensions of the machine ca. 2 x 1,6 m total power requirement 5 kW weight of the machine ca. 2,2 t Fobvm Iujv U Dmfjfegb Speed range - grinding spindle: 1500 / 1625 / 1800 / 2000 / 2200 / 2420 rpm Accessories: Coolant system Grinding disc Machine feet

Year of construction: 2013, operating hours: 14,044 h, Condition: ready for operation (used), General Data Measurements width 960 Measurements depth 1502 Measurements height 1900 Machine weight 850 Additional Equipment Coolant System: Coolant tank capacity: approx. 125 liters This grinding machine was manufactured in 2013. It is designed for face and top grinding of TCT circular saw blades, accommodating blade diameters from 80 to 650 mm and tooth pitches from 6 to 100 mm. Features include adjustable hook angles from -10° to +30° and clearance angles from 5° to 25°. It supports a grinding wheel diameter of 125 mm and operates at speeds up to 20 teeth/min. For more information about this grinding machine, please reach out to us. Application Types Grinding Fgjbvm Iouc Hnvjufsb

Condition: ready for operation (used), Year of construction: 2003, Control: Heidenhain Grinding length 1000 mm Center height 175 mm B-axis Grinding wheel dimension 400 mm Grinding spindle speed 2000 rpm Cooling system Measuring probe Fgebvjr Dbltem Iufeb Hydrostatics

Condition: good (used), Year of construction: 1969, Saw blade grinding machine, tool grinding machine, grinding machine, circular saw blade sharpening machine, saw blade sharpening machine -Manufacturer: Loroch, saw blade sharpening machine type SW with dust extraction -Saw blade diameter: approx. 50 to max. 470 mm -Whetstone: Ø 150 x 1.5 x 30 mm -Individual components: see photos -Dimensions: grinder 630/430/H1080 mm / suction H700 mm Fsbvmsrgtfcs Iufogb -Total weight: 141 kg

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder 48" Magnetic Chuck Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Fobvm Ijvwc I Houfogb Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3048mm Floor space 4394 x 3353mm Weight approx 12,200kgs / 12ton

Condition: ready for operation (used), Belt Grinder, Pedestal Belt Grinder,Used machine Manufacturer: Multi-Tool A/S Type: GS 75 Abrasive belt size: 75 mm Electrical specifications: 400V; 8.8A; 4kW; 2890 RPM Overall dimensions: Fsbvsv Ilzqom Iufjgb Length: 1000 mm Width: 650 mm Height: 950 mm Weight: 110 kg

Condition: used, Technical details: grinding length: 600 mm centre height: 180 mm swing dia.: 360 mm workpiece weight: 80 kg max. dia. of grinding wheel: 500 mm grinding wheel width: 80 mm grinding wheel hole diameter: 203,2 mm peripheral speed: 45 m/sec Fgsbvjrkr U Eom Iufeb There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system. *

Year of construction: 2015, Condition: ready for operation (used), General Data Measurements width 2800 Fgsbvju Txhiem Iufjb Measurements depth 3000 Measurements height 2500 Main Drive Main motor power 3.7 kW Number of axis 3 Workpiece Workpiece Z 375 mm This 3-axis GEIBEL & HOTZ FS 640 SD grinding machine was manufactured in 2015. It features a max grinding length of 600 mm, width of 400 mm, and a workpiece height of 375 mm. The grinding spindle is horizontally fitted, powered by a 3.7 kW motor. Dimensions are 3000x2800x2500 mm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 640 SD machine we have for sale. Contact us for more information. Application Types Grinding

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,650 mm, total length: 4,640 mm, total height: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, overall weight: 1,200 kg, input voltage: 400 V, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, grinding width: 950 mm, grinding belt speed: 25 mm/s, grinding belt length: 9,000 mm, extraction connection diameter: 180 mm, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, height adjustment type: electric, grinding length: 2,500 mm, motor speed: 1,435 rpm, input frequency: 50 Hz, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Febev S Sr Rjvm Iufogb Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: ready for operation (used), Functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 375 mm, For sale is an ELB Optimal 6375ND surface grinding machine. The machine is fully functional, currently in our warehouse, and ready for shipment. Grinding length: 600 mm Grinding width: 375 mm Max. workpiece height: 375 mm Table load: 300 kg Feed: Automatic Drive power: 3.7 / 4.7 kW Weight: approx. 3500 kg Fgsbvm Ijv Tp H Uoufeb Accessories: Magnetic plate

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC Fgsbvm Iovzrzqeufeb X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, These are the original grease cartridges for the LGB 125ml. Machines that need to be replaced regularly to ensure precise lubrication. Fjbvev Ak Sdom Iufegb The price is for 1 piece. For other spare parts for LGB L.G.B. SCOP, please feel free to contact me as I am the representative.

Year of construction: 1971, Condition: good (used), 1 used cylindrical grinding machine, make Cincinnati, type R 75, year 1971 centre height 130 mm Febvjhf I Icjm Iufegb grinding length 760 mm spindle bore 38 mm grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. max. grinding spindle double swivelling

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° Fgobvmomnntmj Iufob - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 12551/94-12, Automated system for finishing operations with a centrifugal disc. Fgobvm Iujv U Em Tofob

Condition: used, Distance between centers: 2000 mm Maximum grinding diameter: 360 mm Height at center: 180 mm Wheel diameter: 500 mm Fobov R Ufdevm Iufjgb Wheel width: 80 mm Restear rest: Yes Internal grinding: Yes

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Jig Grinding Machine / Brand: Hauser / Type: S 50 / Adcos, Year of construction: 1986, Modernization: 2018 Modernization in 2018 included: - New drives and electronics - Fire extinguishing unit, Brand: Kraft & Bauer - Extraction unit with stand and special bonnet, Brand: Büchel - Control Adcos CNC 800 - New command unit - Electronic hand wheel - Hydraulic Z-axis lifting unit - ASS with crash sensor Fobvmjrn Trho Iufjgb The machine can be inspected by appointment under power. Operating hours (26/02/2024): * Total switch-on hours: 32.065 * Spindle hours: 13.414 TECHNICAL SPECIFICATIONS: * Control: Adcos CNC 800 Working range of the slides: Adjustment range: * X-axis (table slide): 900 mm * Y-axis (grinding head): 600 mm * W-axis (movable crossbeam): 600 mm * Z-axis: 170 mm SHZ (Z-axis free programmable in 10 grinding levels) * Workpiece height: approx. 500 mm Accuracy: approx. 5 µ/min Table surface: 640 x 950 mm Load: 1 tonne Working range of the grinding head: Speed with electric motors: 4.000 – 80.000 rpm Speed with air turbines: bis 40.000 und 160.000 rpm EQUIPMENT: * Grinding contact indicator * Extraction system * Fire extinguishing system * Documentation There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: excellent (used), Year of construction: 1962, machine/vehicle number: 12.178, CNC roll grinder WALDRICH SIEGEN, 1996 converted into a CNC machine through HERKULES. Max. grinding dia 1.200 mm, max. grinding lenghts 5.000 mm, max roll weight 25 t between the Centers.The machine get a new CNC Control, new Electric Cabinet, new motors, new wiring and new measuring System in 2023. The machine can be inspected after Appointment in our warehouse. Fjbefbb D Dsvm Iufogb

Condition: used, Year of construction: 1986, grinding diameter 350 mm grinding length 600 mm centre height 175 mm Very well maintained machine. The machine comes from a precision grinding shop from the Black Forest. Can still be viewed under power for a short time at the seller's premises. Fsbvev Tqqnem Iufjgb In 2022, the machine was partially overhauled and serviced in-house with production of the geometry according to the manufacturer's protocol. Equipment: -2-axis digital readout FAGOR -sine bar -tailstock with fine adjustment -Hydraulic tailstock -Surface grinding device -Internal grinding device -Fischer UJ70 internal grinding spindle -Paper belt filter -automatic sequence: roughing-finishing-firing-retur Translated with (free version)

Condition: used, Year of construction: 1988, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW Fgobveu Rt E Tom Iufsb weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: used, Year of construction: 2002, grinding diameter 250 mm Fgsbvjvx Dvuem Iufeb grinding length 400 mm centre height 125 mm Control Fanuc 21i-T Maschine gewartet und teilüberholt. -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter

Condition: used, Year of construction: 1966, With internal grinding arrangement. Fjbvm Isu Rt Dpoufsgb