Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 50 CNC milling machine direct from the manufacturer. - Machine in column construction made of cast iron for high rigidity - Carousel tool changer with 8 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 10 kVA Milling spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 24 Nm Drive motor S6-30% operation 5.5 kW Torque drive motor S6-30% operation 36 Nm Spindle holder BT 30 Coolant system Coolant pump output 450 W Tank capacity 70 liters Milling accuracy Repeat accuracy 0.015 mm Positioning accuracy 0.015 mm Tool changer Carousel type Number of tool positions 8 positions Tool diameter max. 100 mm Tool length 200 mm Tool weight max. 6 kg Fsb Hjuy Nh Nelqxksgb Tool change time according to VDI 2852 7 seconds Travel distance X-axis 330 mm Y-axis 220 mm Z-axis 320 mm Feed drive Rapid traverse X-, Y-, Z-axis 15 m/min. Motor torque X-axis 3.5 Nm Y-axis 6 Nm Z-axis 6 Nm Speed range Speeds* 10,000 min-1 Pneumatics Air pressure 6 bar Milling table Distance spindle - table 90 - 410 mm Distance spindle - column 280 mm Table length x width 690 x 225 mm T-slot size / number / distance 14 mm / 3 / 63 mm Max. load 150 kg Dimensions Length x width x height 2,030 x 1,600 x 1,980 Total weight 1,900 kg

Year of construction: 1990, Condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Fgsb Hlsfg Ep Djqxkjb Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1980, Functionality: fully functional, Tool milling machine Lid FP 3 *partially overhauled* Item number: 07-07-090 Manufacturer: Lid Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel paths: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping area: approx. 800x420mm Spindle: Speed ​​range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverse: approx. 1.5m/min Accesories: Vertical & horizontal milling device Fgsb Horivr Tolqxksb Coolant system *New* Complete documentation Various tension wrenches Horizontal spindle cover cap Safety handwheels 3-axis digital display SINO *New* Tilting swivel table Work light *New* Machine feet *New* Further accessories on request Price and further technical data on request

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm Fgeb Heiy Ekvolqxkob spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 38,118 h, Control Unit Brand SIEMENS Model 840 D Fgsb Hewfupqjlqxkjb Main Drive Spindle speed range 6000 rpm Spindle motor power 36 kW Movement X-Axis Movement 10000 Y-Axis Movement 2500 Z-Axis Movement 1000 Additional Equipment Number of Tools: 170 This 3-axis Unisign UNIPORT 6000 was manufactured in 2008. A Gantry milling machine designed for precision and versatility in complex machining tasks. Consider the opportunity to buy this Unisign UNIPORT 6000 Gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Functionality: fully functional, Hermle UWF 802M universal milling machine with Heidenhain TNC124 linear control in excellent condition! Technical specifications: >> Year of manufacture approx. 1995 Machine no. 9804 >> Fixed angle table >> Speed: 17 to 3550 rpm >> Continuous feed in 3 axes from 0 to 1600 mm/min >> Drive power: 6 kW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 linear motion control >> Hydraulic clamping, vertical and horizontal Fgsb Hlswfq Hfjqxksb >> Automatic central lubrication >> Spindle brake >> Operating instructions About the machine: Offered is a Hermle UWF 802M tool milling machine with Heidenhain TNC 124 path control. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No extensive CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Hermle on site with power on.

Condition: excellent (used), Walter cutterhead, type: F3042B080Z0515 Fob Hlqxjqgc Thoksgb

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Misc accessories MARCELS MASCHINEN CH Fgeb Hlqeff R Slsxkjb

Condition: excellent (used), Year of construction: 1980, Functionality: fully functional, Tool milling machine Lid FP 3 *partially overhauled* Item number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Routes: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping area: approx. 800x420mm Spindle: Speed ​​range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverse: approx. 1.5m/min Accesories: Vertical & horizontal milling device Febjvupuuo Hlqxkegb Coolant system *New* Complete documentation Various tension wrenches Horizontal spindle cover cap Safety handwheels 3-axis digital display SINO *New* Machine feet *New* Work light *New* Further accessories on request Price and further technical data on request

Condition: as good as new (ex-display), Year of construction: 2024, Technical specifications: Working dimensions on the X-Y axis: 2080 x 2800 mm ▪ Working area on the Z axis: 250 mm ▪ Working height on the Z axis: 200 mm ▪ Working speed X-Y: 30 m/min ▪ Tool changer with 10 tool positions ▪ Max. working speed X-Y: 20 m/min ▪ Working speed Z: 15 m/min ▪ Material fixation method: with vacuum ▪ Working areas on the vacuum table: 8 areas x 30 holes each ▪ Vacuum pump capacity 2 x 200 mc/h ▪ Drive motor type: Delta servo motors x 4 ▪ Positioning accuracy +-0.05/300 mm ▪ Motor power: 9 kW ▪ Air-cooled spindle with ceramic bearings ▪ Spindle speeds: 0-24,000rpm ▪ Spindle taper ISO30 ▪ Type of tool holder: ER32 ▪ Voltage: 400V ▪ Weight: approx. 3000kg Fjbsiim Dde Hlqxkjgb

Year of construction: 1998, Condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Fgsb Hlqxjwfuqhekeb Brand SIEMENS Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Condition: new, Breton Eagle is the vertical gantry 5 axis, milling centre for machining complex 3D shapes in lightweight alloy, resin, or composite materials Fob Hlqjwgk T Ioxkegb

Condition: good (used), Tos FGS 50 Yom 1986 Fgjb Hlqxowhvy Njksb Complete with DRO and tooling!

Condition: good (used), DECKEL universal table, Support surface 800 x 380 mm 8 T-slots See photos for condition Fgob Hlqxjv N Hyqsksb

Condition: excellent (used), Year of construction: 1978, Functionality: fully functional, Universal Milling Machine Deckel FP 2 Partially Refurbished Item Number: 07-07-112 Manufacturer: Deckel Condition: Very good general condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of manufacture: approx. 1978 Dimensions (L x W x H): approx. 2000 x 1500 x 1800 mm Fgsb Hlqxswfxggokjb Weight: approx. 800 kg Digital Readout: 3-axis digital readout Sino New Travel Paths: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 350 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds & Rapid Traverses: Feeds in all 3 axes Feed range: approx. 8–400 mm/min Rapid traverse: approx. 1.5 m/min Accessories: Vertical & horizontal milling equipment Work light New Coolant system New Complete documentation Various clamping wrenches 3-axis digital readout SINO New Spindle protection cap Horizontal spindle cover cap Chip tray Safety handwheels Machine feet New Further accessories available on request. Price and further technical data available upon request.

Condition: used, NC universal tool milling machine MAHO type MH 700 P Fgsb Hewd Szbelqxkjb with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: Fjb Hlqowfff Nsxkogb – Documentation – Machine feet – Machine light

Condition: new, Designed to overcome the common limits of this product category: reduced robustness and poor repeatability over time. Thanks to its optimised design, Breton Hawx is not only more rigid and stable but also guarantees an excellent size-towork area ratio. It is easily integrated into all production environments, it’s delivered already assembled and tested; it does not require special foundations and has minimal commissioning times. The Hawx E1 is built using a selfsupporting monolithic structure, which is one of the main characteristics of the machine, making it robust and enabling easy handling for delivery and installation. The HAWX E2 foresees a pre-assebled starting module made from a U-shape monoblock structure which is expandable longitudinally using one or more pre arranged and calibrated extra U-shape supporting frames. Both versions of the machine are built with a box-in-box architecture that guarantees a significant increase in rigidity of the bridge-ram assembly. The high strength, characteristic also of the new Hornet head, enables a remarkable increase in material removal performance and accuracy, all with the greatest dynamics. Fsbewgk Tuj Hlqxkegb

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, tool mount: 50 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 15 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, table length: 6,000 mm, table width: 3,000 mm, year of last overhaul: 2017, power: 0.037 kW (0.05 HP), Equipment: documentation/manual, rotational speed infinitely variable, Offer number V(F)-6895 CNC traveling column milling machine Make SHW Type UniForce 6L Year of construction 2001/2017 overhauled by SHW Control Heidenhain TNC 430M Panel field: 6,000 x 3,000 x 300 mm Travel paths: Longitudinal column travel X 6,000 mm Vertical travel Y 2,600 mm Milling slide transverse path Z1,500 mm Fgobotn A U Uj Hlqxksb Cutting feeds X,Y 2 - 12,000 mm/min. Z 2 - 15,000 mm/min. Automatic head indexing in two planes 340 x 1° / 180 x 1° Spindle drive power 37 / 53 kW Spindle speeds 22 - 4,000 rpm Gear stages (autom.) 2 Spindle holder SK50 DIN 69871 Tool holder SK 50 Tool magazine/automatic tool changer: Tool magazine positions 66 Tool diameter with/without adjacent tools max. 125 /250 mm Tool length max. 400 mm Tool weight max. 25 kg Accessories/equipment: Automatic indexing of the milling head 340 x 1°/180 x 1°. Heidenhain external electronic handwheel HR 410. Linear scales for X, Y and Z axes. Internal/external coolant 10/16 bar. Paper belt filtration unit for coolant. Switchover from internal/external coolant supply to air. Oil cooler for the headstock. Automatic headstock level control - Electromechanical control via 2 vertical ball screws with separate drives, measuring systems and axes. Operating platform with integrated CNC control panel, movable in the X-axis. Radio measuring probe. Chip conveyor 6000 x 350 x 1250 mm. Ethernet interface. Condition Very good condition. Completely overhauled by the manufacturer in 2017 and then delivered to our customer. The machine has been used normally since then.

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand BOSCH Model OSA3 Main Drive Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Tools Number of index 48 Type of tool holder HSK63 Media Chip conveyor Yes Fgjb Hlqxowd Ux Neksb This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Tool Milling Machine Deckel FP 4 M Aktiv Item number: 07-07-235 Manufacturer: Deckel Very good overall condition Workshop-tested machine Delivery time: Immediately – subject to prior sale Year of manufacture: approx. 1988 Dimensions (L x W x H): approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Digital Readout: 3-axis "AKTIV" digital readout (Heidenhain TNC 113) Fgsb Hlewfxf Neqxksb 4th axis with additional digital readout (Heidenhain) Travel distances: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Spindle: Speed range: approx. 50–2500 rpm Tool holder: ISO 40 Drive power: approx. 6.0 kW Automatic tool clamping Feeds and rapid traverse on all 3 axes Feed range: approx. 8–630 mm/min Rapid traverse: approx. 3.0 m/min Accessories: 4th axis rotary table Vertical and horizontal milling attachments Angle milling head Quill (stroke approx. 120 mm) Coolant system Complete machine documentation Various clamping wrenches Horizontal spindle cover Safety handwheels Central lubrication system Emergency stop Swiveling control panel Spindle brake Further accessories available on request. Price and additional technical details available upon request.

Condition: new, Breton Matrix E1 is the 5-axis monobloc high speed vertical gantry milling centre for machining workpieces in steel, lightweight alloy or special composites Fgob Hlqewgk Thsxkeb

Condition: good (used), Year of construction: 1993, 5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: Fsb Hle Rb D Asqxksgb 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS

Condition: good (used), Year of construction: 2016, CNC 5-axis portal milling machine (gantry) Jobs JomaX 265 W Year of construction 2016 Siemens 840D SL CNC control Panel field size 25,000 x 5,000 mm (10 panel fields) Panel field load per panel field max. 10,000 kg Rapid traverse X,Y,Z/W 28,000/8,000 mm/min. C/A axis 30°/s Distance spindle nose ~ table max. 3,900 mm Distance between uprights 6,000 mm Travel distances X 28,000 mm Y 6,500 mm Z 1,500 mm 2-axis NC swivel milling head. C 400 (+/- 200°). A 220° +/- 110° Spindle holder HSK-A100 Spindle drive power 42/53 kW Spindle torque max. 1,337/1,687 Nm Spindle speeds up to 3,000 rpm. 1-axis angular milling head 90° BUSS With C-axis +/-200° Spindle holder HSK-A100 Spindle drive power 30/37 kW Spindle torque max. 955/1,178 Nm Spindle speeds up to 2,800 rpm Vertical milling head BUSS Feb Hlqxjrif I Hskegb Spindle holder HSK-A100 Spindle drive power 45/56 kW Spindle torque max.1,433/1,783 Nm Spindle speeds up to 4,000 rpm. Head magazine with 3 positions Tool magazine with 60 positions Workpiece measurement with M&H Multi 20 measuring probe. Tool measuring system for diameter and length as well as tool breakage monitoring. High-pressure coolant through the tool 50 bar. 2 chip conveyors Estimated total machine weight 450 - 500 tons Offer number V(F)-6865

Condition: excellent (used), Year of construction: 2003, CNC Gantry Type Milling - Routing Machine (for Aluminium Skin drilling / Milling Operations) MTorres MGP-51350-TT Manufactured 2003 Siemens Sinumerik 840D CNC control Machine working traverses: X 13000 mm - Gantry longitudinal travel Y 4500 mm - Milling support cross travel Z 1000 mm - Milling ram vertical travel Positioning speeds / rapid traverse rates 15000 mm/min. 2-Axis rotary swivelling milling head A & C Axes simultaneous Positioning speeds / rapid traverse rates 10 rpm Spindle drive motor rating 20 KW Spindle speeds to maximum 30000 rpm (electro spindle) 20 station tool changer Tool diameter max. 80 mm Tool length max. 125 mm Tool weight max. 10 kg 16 units TorresTool pogo stick clamping system for parts - NC controlled 5-Axis Gantry Routing & Drilling Machine. Designed for high speed milling and drilling of aircraft structural components. Applications include net trimming and drilling of compound contoured fuselage panels, wing skins, composite structures, frames, stringers, honey comb components, etc. By integrating the TORRESTOOL® with the TORRESMILL® 5-Axes High Speed Milling Machine, Fgobem Shb Hs Hlqxkob the system provides the highest grade of flexibility and reduces change over time from one work piece configuration to another to less than 2 minutes. All support rods with vacuum cups move simultaneously in cnc controlled axes and are automatically locked in their final positions. Proposal Number V(F)-6790