Condition: good (used), Year of construction: 2014, Serial No. 143703, digital display, Heidenhain, table, 600 x 200, X/Y/Z travel, 300 x 350 x 200 mm, max. speed 2,200 rpm, machine lighting, steel cabinet with 2 doors, tool carrier system, 3 levels, contents: lot of SK30 tool holders, tool changers Dsbvcrowazpmeq Teut +++ Attention: Machine is part of an online auction! +++

Year of construction: 1997, Condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm Dusbvcrqjh Stzko Tjt RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Dsbvcowa Ip Horq Tout Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,600 mm, Travels: X-axis (lengthwise): 6.000 mm Y-axis (cross): 1.500 mm Z-axis (vertical): 3.600 mm W-axis (Table): 2.000 mm Spindle speeds in 2 steps: 20 up to 4.000 rpm Torque: 1.410 Nm Clamping force: 20.000 N Feed rates X/Y/Z: 2 up to 12.000 mm/min Rapid traverse X-/Y- and Z-axis: 20.000/15.000/25.000 mm/min Drive of the milling spindle at 100% ED: 37 kW EQUIPMENT: CNC-controlled hydrostatic rotary and sliding table, Brand: RÜCKLE, Type: PKTF 8, Year of construction: 1996 -Clamping surface: 2.980 x 3.500 mm -V-axis: 2.000 mm -Table load approx.: 30 tons 120-position tool changer -Tool diameter max.: 125 mm – with free adjacent seats: 250 mm Duebvcrstw Tx Toq Tst -Tool length max.: 400 mm -Tool weight max.: 30 kg Tool holder (DIN 69871 Form AD): ISO 50 Mobile operator platform Electronic hand wheel HR 420 Chip conveyor 3D thermal expansion compensation Z-axis with level control Tapping without compensating chuck (ratio 1:1) Touch probe system M&H 20.00 wireless Full protection cabin + movable chip protection wall for the rotary table (Setup side/working side) 4-fold milling head changer / Pick-up station 1 piece of Universal milling head , 1° x 2,5° (indexing in the CNC programme) 360 Rear level positions / 144 Front level positions 1 piece of Horizontal milling attachment 1 piece of Universal milling head / Fabrikat: HENNINGER, Type: 880-40 – ISO 40 Internal and external cooling through the spindle Total connected load: 75 kVA Machine weight: 36,2 tons Space requirement (Length x Width x Height) including RÜCKLE table approx.: 12.435 x 8.420 x 5.085 mm

Condition: excellent (used), Year of construction: 1994, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm control Heidenhain TNC 415B table-size 4200 x 1000 mm table load 16 t spindle turning speed range max. 2100 U/min spindle taper ISO 50 power capacity - milling spindle 18 kW distance spindle /table 1445 mm feed speeds max. 4000 mm/min rapid traverse 8 m/min voltage 400 V electric cabinet 1,5 x 0,6 x 1,80 m total power requirement 40 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 9,80 x 3,00 x 3,60 m - Serial No.:9410160 Machine is in excellent condition! Price ex stock Schöneck, free loaded on truck without dismantling of machine table and column! Machine can be reduced to transport dimensions of LxWxH 8,10 x 3,00 x 3,60m. Fully covered Dsbvcjvzhhgjrq Tout transport of this size is available but requires special permit from each state crossed during transport. Dismantling of machine table and column is possible at extra charge!

Condition: good (used), Year of construction: 1991, Table clamping surface 710 x 400 mm Tool holder ISO 40 X-axis travel 400 mm Y-axis 350 mm additionally movable in Y 420 mm Z-axis 380 mm Quill stroke 80 mm Dsbvcrqsupiype Tout Speed range 45 - 2240 rpm Feed range, infinitely variable 6.3 - 1250 mm/min Rapid traverse 1250 mm/min Drive power 2.2 / 2.8 kW Dimensions L x W x H 1400 x 1600 x 1850 mm Weight 1900 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Djbouf Sv Dovcrq Tjut Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Year of construction: 1996, Condition: ready for operation (used), - USED - UNIVERSAL MILLING MACHINE LONGITUDINAL TRAVEL: 1100 mm TRANSVERSAL TRAVEL: 700 mm VERTICAL TRAVEL: 500 mm TABLE SIZE: 1700 x 550 mm SPINDLE: ISO 50 HEAD: A/B AXIS MANUAL CONTROL UNIT: FAGOR Dusbvsiidp Dscrq Tet WEIGHT: 4400 Kg

Year of construction: 1980, Condition: used, Bed Milling machine Bed Miller Model: CNC positioning and conventional Manufacturer: FIAS Berico Type: AF CNC: Siemens OP7 positioning Travel X-Y-Z: 1530x750x750mm Table-dimensions: 1820x650mm Spindle-speed: 30-2000rpm Spindle-take: ISO50 Including cabinet full with tooling and peripherals Machine-dimensions: 3200x2425x2450 (motor dismantled for transport) Machine-weight: 7500kg Video available from full functionality, just before disconnecting. - Year: 1980 - Documentation available: No Duebvcsv Umcisrq Tot Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2008, x-travel 620 mm Debevy Ii Usvcrq Tjut y-travel 420 mm z-travel 400 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 DIN 69871A spindle turning speed range 5 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- max. 2000 mm/min rapid traverse 5 / 4 m/min power capacity - milling spindle (S1) 10,5 kW quill stroke 80 mm voltage 400 V total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,00 x 2,76 x 2,05 m - Serial-No.: 9 Digital display HEIDENHAIN ND780 - stepless speed control - stepless feed drives - electr. handwheel - mechanical handwheels - horizontal milling spindle - coolant device

Year of construction: 2001, Condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH MANUAL A and B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm VERTICAL TRAVEL: 1250 mm RAM TRAVEL: 1000 mm RAPID FEEDS L-T-V: 16 - 15 - 15 m/min Duobvcrqjh Stznj Tst TABLE SIZE: 5000 x 1000 mm TABLE HEIGHT FROM FLOOR LEVEL: 1100 mm SPINDLE: 3000 rpm; 28 kW; ISO 50 HEAD: BIROTATIVA MANUALE TOOL MAGAZINE: CHAIN-TYPE ; 20 POS CONTROL UNIT: SELCA S3045 GEAR BOX: 2 VELOCITA' ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: MILLING HEAD ON RAM TUH 10LT

Year of construction: 2008, Condition: used, Price: On request CNC milling machine machining center Model: 3-axes Manufacturer: Narvik / Pinnacle Type: CNC - PK SV65 VMC / SV65 Controller: FANUC Year: 2008/09 Used for teaching in a school. In very good condition, very little and not intesive used. Work-table: 800x510mm Travel: 650x560x560mm Travel-speed: 10.000mm/min Positioning: 0,001mm Max. workpiece-weight: 600kg Spindle-speed: 8.000 rpm Spindle-take: BT40 Spindle-power: 5,5kW Toolholders: 20st Incl. toolholders en documents Machine-weight: 4500kg Djbvcrev Ul Uqeq Teut Machine-dimensions: 2600x2200x2650mm - Year: 2008 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1987, x-travel 600 mm y-travel 400 mm z-travel 400 mm spindle taper ISO 40 quill stroke 100 mm spindle turning speed range 40 - 2000 U/min voltage 380 V Table dimensions 800 x 400 mm Dujbsiclmxjvcrq Tjt weight 1,9 t total power requirement 3,0 kW dimensions of the machine ca. 1,90 x 1,80 x 1,90 m

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm Dsbvcjh Stzgsrq Tjut TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm RAPID FEEDS L-T-V: 3 - 3 - 2 m/min TABLE SIZE: 2800 x 8000 (5000+3000) mm MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Year of construction: 2000, Condition: used, Price: On request Working width 830 mm Working height 500 mm Power (kW) 5 kW Working depth 600 mm Mounting SK-40 Number of axes 3 Metal milling machine Model: Conventional Manufacturer: KLOPP Type: UFB Debov Ul Taovcrq Teut Travel: 830x600x500mm Table dimensions: 1000x560mm Milling head rotatable Intake: SK-40 Spindle motor: 5.5kW Spindle speed: 31.5-1400rpm Machine weight: 3000kg - Year: 2000 - Documentation available: No - Serial number: 50 EVO Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2006, x-travel 560 mm y-travel 300 mm z-travel 420 mm digital readout 3 Achsen HEIDENHAIN table-size 1100 x 250 mm spindle turning speed range U/min spindle taper ISO feeds 18 - 384 mm/min milling motor 3,7 kW voltage 0 V total power requirement 5,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,45 x 1,70 x 1,90 m - Serial-No.: 676axis digital readout HEIDENHAIN Debeiclm Asvcrq Tout - rapid traverse - central lubrication - coolant device - machine light

Year of construction: 1990, Condition: used, Empty weight: 3.500 kg Dimensions (LxBxH): 270 x 190 x 260 cm - Year: 1990 - Documentation available: No - Serial number: K30741 - Control: CNC - Transport dimensions: 2700mm x 1900mm x 2600mm (l x w x h) - Transport weight [kg]: 3500kg Dujbvcrov Ul S Neq Tot Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1992, x-travel 725 mm y-travel 525 mm Duobvcrsvbwimsq Tjt z-travel 505 mm table-size 1000 x 500 mm table load capacity 500 kp spindle taper ISO 40 quill stroke 80 mm spindle turning speed range 25 - 5000 U/min voltage 400 V tool changer made by: Kelch 20-fach CNC-control PHILIPS 3460 power capacity - milling spindle 10 kW total power requirement 18 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit.

Year of construction: 1997, Condition: used, Price: On request Duebsv Ul S Ajvcrq Tst - Year: 1997 - Documentation available: No - Control: CNC - Motor power: 22.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: reconditioned (used), Year of construction: 2009, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm control iTNC 530 HEIDENHAIN table-size 3.230 x 1.050 mm table load 8,0 t spindle taper ISO 50 tool change unit 24 Pos. spindle turning speed range 30 - 3.500 U/min drive capacity - spindle motor 25 kW feed stepless 1 - 5.000 mm/min rapid traverse 10,0 m/min chip conveyor Spiralförderer voltage 380 V total power requirement 35 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 7,40 x 3,65 x 3,60 m Duebvcevlzznjrq Tst hydraulic power unit 1,40 x 0,50 x 0,60 m 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

Condition: used, Working width 420 mm Working height 300 mm Power (kW) 2 kW Working depth 335 mm Intake ISO30 Milling machine, conventional milling machine cutter Dsbvjv Ul Svocrq Tsut Model: Conventional Manufacturer: Mikron Type: WF1 Travel: 420x335x300mm Spindle speed: 50-2240 pm Table: 630x250mm Intake: ISO30 Motor power: 2.5kW Machine-afmeting: 1230x1200x1750 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1999, Condition: used, Price: On request - Year: 1999 - Documentation available: Yes Djbvcrev Ul Scsq Tjut - CE mark available: Yes - Serial number: 11035510344 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Milling machine miller, mill Model: Conventional Dobev Ul R Esvcrq Tjut Manufacturer: Rambaudi (Bridgeport-model) Type: VR3 Digital readout: 3-Achsen Travel: 900x280x600mm Spindle-speed: 48-2000 rpm (Stufenlos) Table: 1200x300mm Spindle-take: ISO40 Milling depth: 125mm Machine-dimensions: 1800x1700x2300mm Machine-weight: 1200kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1997, Condition: used, Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-2500 CNC: Heidenhain, 2x controller Year: 1997 Bed-dimensions: 2900x800mm Rotatable bed: 800x800mm X-travel: 2500mm Y-travel: 935mm Z-travel: 900mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Tool-holder: 30 pcs Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 6500x3200x3500mm Machine-weight: 18500kg Dobvcrqjv Ul Rre Tjut - Year: 1997 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2008, Condition: used, Price: On request CNC milling machine machining center Model: 3-axes Manufacturer: Narvik / Pinnacle Type: CNC - PK SV65 VMC / SV65 Controller: SIEMENS Year: 2008/09 Used for teaching in a school. In very good condition, very little and not intesive used. Work-table: 800x510mm Travel: 650x560x560mm Travel-speed: 10.000mm/min Positioning: 0,001mm Max. workpiece-weight: 600kg Spindle-speed: 8.000 rpm Spindle-take: BT40 Spindle-power: 5,5kW Toolholders: 20st Incl. toolholders en documents Djbjv Ul Nujvcrq Tjut Machine-weight: 4500kg Machine-dimensions: 2600x2200x2650mm - Year: 2008 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren