Condition: good (used), Year of construction: 2001,

Condition: new, The LabCenter is ideal for CNC training, but also for the production of small workpieces. The compact and mobile CNC machining center represents the full range of functions of a large production machine. The main spindle rotates continuously variable up to 5000 revolutions and the Siemens 808 control offers an ideal introduction to CNC applications with its simple, intuitive operator guidance. With the ISO 20 spindle taper, automatic tool clamping and a 4-way pick-up tool changer, the LabCenter enables practice-oriented training. Dkolqouy Ihhs T Nk Hsl

Condition: good (used), Year of construction: 2009, Traverses X Y Z: 6300 x 1200 x 2000mm, Dksljwga Rpsq T Nk Hol Table 7000 x 1200mm, B axis 360 degrees via 1 degree increments, A axis -/+ 45 degrees via 2.5 degree increments, Heidenhain iTNC530, ISO 50 spindle taper, 15,000rpm Spindle Speed, 30 station toolchanger, high pressure through spindle coolant, Interlocked guards, swarf conveyor. New spindle fitted 2025.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Dkolowhu S Rsq T Nk Hel Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t Dkslq T Nkowhqyqe Hol

Condition: good (used), 1 used tool milling machine Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Dkjlq T Nkev N Dzfs Hsl Rapid traverse 2000 mm/min Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Delqswh U Tnj T Nk Hekl Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Tool Taper: SK 50 Distance Between Columns: 3.200 x 4.000 mm Further information: 4 Milling Heads available.

Condition: new, The models of the Mark Super series are drilling and milling machines in the best way. They are ideal as a compact drill with a powerful drive and a wide speed range. But these machines also cut a fine figure when milling steel and non-ferrous metals. They are therefore widespread in workshops and maintenance departments for single piece machining, small series production or training departments. Thanks to their compact design and versatility, they are still a bestseller even after 15 years. Dkjlq T Nsqcuc Tok Hjl

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° Dkelovwgtyjq T Nk Hel milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical. Ergonomic. Universal ZIMMERMANN FZU32 portal milling machine is in mint condition and can be secured under power can still be secured under power at the seller. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Dkslq Tjwhu Swj Nk Hel Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: used, Year of construction: 1996, 1400 mm table-size 2000 x 1300 mm Motor output 75 kW 1040 mm Doljwhqy Roq T Nk Hokl +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Delqjwhm S Ne T Nk Hokl Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm Dkslq T Noucphxek Hsl total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: new, The models of the Mark Super series are drilling and milling machines in the best way. They are ideal as a compact drill with a powerful drive and a wide speed range. But these machines also cut a fine figure when milling steel and non-ferrous metals. They are therefore widespread in workshops and maintenance departments for single piece machining, small series production or training departments. Thanks to their compact design and versatility, they are still a bestseller even after 15 years. Dslqjqcuc Eo T Nk Hskl

Condition: excellent (used), Year of construction: 2008, x-travel 1500 mm Djlq Tsvwgris Nk Hskl y-travel 1300 mm z-travel 600 mm Control HEIDENHAIN TNCi 530 spindle turning speed range 18000 U/min tool taper HSK-A 63 tool change unit 30 Pos. table dimension - longitudinal 2000 mm table dimension - cross 1100 mm spindle drive 26 kW column daylight 1400 mm weight of the machine ca. 19 t dimensions of the machine ca. 5 x 2,4 x 3,6 m This fpt Raid portal milling machine is in very good condition and can be inspected under power at the seller's premises by arrangement. Description: Spindle hours approx.: 15.000h Tool measurement BLUM Laser

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Technical details x-travel 290 mm y-travel 150 mm z-travel 330 mm table surface area 210 x 600 mm tool taper SK 40 total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Dkeljwhu R Hoq T Nk Hel Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm Dkelqov Rxa Sj T Nk Hol T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: excellent (used), Year of construction: 1996, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Dkolewhm Sisq T Nk Hol Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Delqjdzy Uye T Nk Hjkl Machine weight 9500 kg Table load: 3000 kg

Condition: used, The milling machine is equipped with a large clamping table and a swiveling universal milling head that can be swiveled in two planes and also positioned horizontally. The UWF series thus almost covers the area of ​​application of a universal milling machine. An automatic feed that can be switched via a gearbox drives the X- and Y-axes. The Z-axis can be traversed in rapid traverse. Dovetail guides in all axes can be precisely adjusted. With its extensive equipment, the UWF 1.1 is ideal for individual production, repair and training workshops. Dkjlewhkcreq T Nk Hsl

Condition: excellent (used), Year of construction: 2012, x-travel 6800 mm y-travel 3400 mm z-travel 2000 mm Control HH iTNC 530 table dimension - longitudinal 6000 mm table dimension - cross 2500 mm table load 150 t tool change unit 80 Pos. dist. between columns - front to rear 4700 mm weight of the machine ca. 80 t dimensions of the machine ca. 12 x 11 x 7 m This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Patented double Hirth serration with a pitch of 0.02 degrees --> Pitch of both swivelling axes 0.02 ° --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> simultaneous !! --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel Dkoljvwgpzeq T Nk Hsl X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Dkelq T Nkowhu N No Hol Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Machine lamp

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Dolq T Nksv Rpr Se Hekl Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: used, Year of construction: 1986, Universal Milling Machine Manufacturer: IMATEC, Type: FU-145 Year of manufacture: approx. 1986 Technical Specifications Manufacturer: IMATEC Type: FU-145 Year of manufacture: approx. 1986 Conventional Control System Travels X/Y/Z: 1000 / 300 / 500 mm Vertical Spindle Speeds: 38 - 1440 rpm Horizontal Spindle Speeds: 35 - 1500 rpm Djlq T Nowhm R Ssk Hokl Spindle Mount: ISO 50 Milling Motor: 5.5 kW Connected Power: 7.0 kW Installation Dimensions: approx. L 2.0 x W 2.10 x H 2.2 m Weight: approx. 3.1 t Features • 3-axis digital display ELESTA • Table size: 1620 x 320 mm All information is subject to change without notice. A live demonstration is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 Dkjlq Tsvwglvo Nk Hjl diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.