Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min Crjlsvanqxoil Ryueb feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools

Year of construction: 1985, Condition: used, machine/vehicle number: 2810-3870, Fully functional Electric handwheel Crolil Ryottgt Djujb Dialog 4 control Many optional accessories Documentation available Electrical documentation available

Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro Csljmn Ipujil Ryusrb 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro 275 mm high 22 Euro 320 mm high 25 Euro

Condition: excellent (used), Year of construction: 1994, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 001, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 10,000 rpm, total height: 2,250 mm, total width: 1,550 mm, total length: 1,800 mm, table width: 500 mm, type of input current: three-phase, table load: 100 kg, overall weight: 2,200 kg, input voltage: 400 V, control cabinet height: 1,460 mm, control cabinet length: 690 mm, control cabinet width: 1,200 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, 3 axis CNC-milling machine with a high speed spindle. Frame built out of ground plutonic rock (Granite, same as measuring and control surface plates) sitting on a welded steel frame. Linear bearings and ball screws made by high end German company (specific name lost), spindle is made by Spintech (German), water cooled and has an ER12-collet holder, pneumatic tool changer. Servos are Robbin Myers. With proper settings and fresh tools this machine can mill within 0.005mm. CNC operating system is HEIDENHAIN. Celsvgrmqoil Ryusrb Most of its working life it has been milling high precision anodes in carbon positives for spark-erosion cutting, so it has never been exposed to heavy forces, last ten years it has worked very few hours as a hobby machine cutting plastics and some small amount of brass. Spindle and the X-axis Angular contact ball bearings has been refurbished about 3 years ago and has seen very little use after that.

Year of construction: 1988, Condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Crelowaa Insil Ryueb

Condition: ready for operation (used), Year of construction: 1990, Available immediately from location: Reckermann Milling Machine Type Delta 1300 Year of manufacture 1990 Table 1400 x 400 Travel X/Y/Z 1000/400/450 mm SK 50 Spindle speeds 60 – 3600 rpm Drive 12.5 kW Dividing head Csliljv Uh A Ds Ryujrb Many tools Heidenhain 3-axis digital readout Weight 4 tons Price €4,500 plus VAT, ex location

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 82 Nm tool taper MAS BT 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range -5 / +110 ° rotation range 360° ° T-slots 7x 14 x 63 mm Cjlot Uv Dfsil Ryusrb number of toolpositions 16 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 17 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m 5 Axis CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - swivel-rotary-table : controlled B&C-Axis / only positioning - Operating-Hours.: Power-On: ca. 37.700h / Spindle-Runtime: ca. 10.800h

Condition: excellent (used), Year of construction: 1978, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display. The machine is in very good condition and comes from a government training department. Rigid table, SK 40 spindle mount, accessories: various collets and milling arbors, counterholder. Very good, operational condition. Can be demonstrated under power upon request. Celov U Rh Nsil Ryusrb

Year of construction: 2015, Condition: used, Empty weight: 1.400 kg Crslilsv Stkuj Ryusb Dimensions (LxBxH): 140 x 138 x 200 cm - Year: 2015 - Documentation available: Yes - CE mark available: Yes - Control: CNC - Motor power: 1.5kW - Transport dimensions: 1400mm x 1380mm x 2000mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, machine/vehicle number: 111146, the machine has an IKZ 22 bar. Chip conveyor, handwheel, Heidenheim control 530 machine is sold without tools without vice technical condition very good, can be inspected at any time without electricity. Colil Reu A Azusyuorb

Year of construction: 2000, Condition: ready for operation (used), . N.2 SQUADRE DA FRESA - USATE - OVERALL DIMENSIONS: 1200 x 1000 x 550 mm Cjliljv Rhuxo Ryujrb

Condition: used, Milling machine miller, mill Model: Conventional Manufacturer: TOS Type: FGH 32 Year of manufacturing: 1988 Crelil Rjvq Uqtjyuob Digital readout: Mitutoyo Travel: 900x350x400mm Spindle-speed: 32-1400 rpm Table: 1250x360mm Spindle-take: SK40 Spindle-motor-power: 7,5kW Machine-dimensions: 2400x1900x2200mm Machine-weight: 2800kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,958 h, machine/vehicle number: 121113, used milling machine IKZ 22 bar chip conveyor handwheel technical condition very good. The machine is sold without tools and without accessories under power Inspection possible at any time. Crjleu A A Dcjil Ryuob

Operating hours: 63,151 h, Condition: used, Empty weight: 3.000 kg Dimensions (LxBxH): 205 x 260 x 210 cm Cslsvtxpxjil Ryuorb Price: On request - Documentation available: Yes - Serial number: 65391 - Operating hours: 63151 - Transport dimensions: 2050mm x 2600mm x 2100mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1973, Condition: used, - Year: 1973 - Documentation available: Yes - Serial number: 1626 - Control: Conventional - Motor power: 1.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Csljv Ewg Tjil Ryusrb Bram van Summeren

Year of construction: 2007, operating hours: 6,288 h, Condition: used, Empty weight: 1.000 kg Dimensions (LxBxH): 220 x 160 x 240 cm Price: On request - Year: 2007 - Documentation available: Yes Colilov S Dygj Ryusrb - CE mark available: Yes - Serial number: 1062742 - Operating hours: 6288 - Control: CNC - Transport dimensions: 2200mm x 1600mm x 2400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Milling machine, VMC Model: CNC Manufacturer: Leadwell Type: VMC-40 Year of manufacturing: 1997 Control: Mitsubishi Travel: 1020x510x510mm Spindle-speed: 8000 rpm Table-dimensions: 1200x500mm Spindle-take: ISO40 Machine is tested (with video). Tooling included, machine-vices not. - Documentation available: No Crjlil Rjvq Um Ijyusb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Price: On request CNC Digital type: UNIMAX Number of axes: 3 Travel x: 1020mm Travel y: 510mm Travel z: 610mm Colil Ryevr Uvxsuerb Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Documentation available: Yes - CE mark available: Yes - Control: CNC - Motor power: 15.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Empty weight: 3.200 kg Dimensions (LxBxH): 300 x 230 x 200 cm Price: On request - Documentation available: No - Control: Conventional - Transport dimensions: 3000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3200kg - Transport packages [pcs.]: 1 Crslilovywd Us Ryusb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1978, Condition: used, Price: On request - Year: 1978 - Documentation available: No - Serial number: 086604 - Control: Conventional - Motor power: 12.0kW Cjlil Rjv Tvk Tjyuerb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2007, Condition: used, Empty weight: 2.500 kg Dimensions (LxBxH): 170 x 210 x 230 cm Crjlilsvy N E Ro Ryusb Price: On request - Year: 2007 - Documentation available: Yes - CE mark available: Yes - Serial number: 750283 - Control: CNC - Motor power: 7.0kW - Transport dimensions: 1700mm x 2100mm x 2300mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Empty weight: 2.000 kg Cjljvtlx Hjil Ryuerb Dimensions (LxBxH): 245 x 210 x 186 cm - Documentation available: Yes - Control: CNC - Transport dimensions: 2450mm x 2100mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1984, Condition: used, Empty weight: 2.500 kg Celil Ryevtapajujrb Dimensions (LxBxH): 160 x 185 x 235 cm - Year: 1984 - Documentation available: No - Control: Conventional - Motor power: 2.5kW - Transport dimensions: 1600mm x 1850mm x 2350mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1986, Condition: used, Empty weight: 2.000 kg Celisvr Uvfel Ryuorb Dimensions (LxBxH): 190 x 165 x 230 cm - Year: 1986 - Documentation available: No - Serial number: - Motor power: 6.0kW - Transport dimensions: 1900mm x 1650mm x 2300mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1996, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Csljvtfr Teil Ryusrb Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE mark available: Yes - Serial number: 11676-FBZ - Control: CNC - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren