Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours Colinpgevanqxo Ierb - WITHOUT tools

Year of construction: 1985, Condition: used, machine/vehicle number: 2810-3870, Fully functional Electric handwheel Crolinpjttgt Djg Ijb Dialog 4 control Many optional accessories Documentation available Electrical documentation available

Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro Cslinpgjmn Ipuj Ijrb 275 mm high 22 Euro 320 mm high 25 Euro

Condition: excellent (used), Year of construction: 1994, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 001, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 10,000 rpm, total height: 2,250 mm, total width: 1,550 mm, total length: 1,800 mm, table width: 500 mm, type of input current: three-phase, table load: 100 kg, overall weight: 2,200 kg, input voltage: 400 V, control cabinet height: 1,460 mm, control cabinet length: 690 mm, control cabinet width: 1,200 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, 3 axis CNC-milling machine with a high speed spindle. Frame built out of ground plutonic rock (Granite, same as measuring and control surface plates) sitting on a welded steel frame. Linear bearings and ball screws made by high end German company (specific name lost), spindle is made by Spintech (German), water cooled and has an ER12-collet holder, pneumatic tool changer. Servos are Robbin Myers. With proper settings and fresh tools this machine can mill within 0.005mm. Colinsvgrmqepg Ijrb CNC operating system is HEIDENHAIN. Most of its working life it has been milling high precision anodes in carbon positives for spark-erosion cutting, so it has never been exposed to heavy forces, last ten years it has worked very few hours as a hobby machine cutting plastics and some small amount of brass. Spindle and the X-axis Angular contact ball bearings has been refurbished about 3 years ago and has seen very little use after that.

Year of construction: 1988, Condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Colinpswaa Ineg Iorb

Condition: ready for operation (used), Year of construction: 1990, Available immediately from location: Cslsv Uh A Deinpg Ijrb Reckermann Milling Machine Type Delta 1300 Year of manufacture 1990 Table 1400 x 400 Travel X/Y/Z 1000/400/450 mm SK 50 Spindle speeds 60 – 3600 rpm Drive 12.5 kW Dividing head Many tools Heidenhain 3-axis digital readout Weight 4 tons Price €4,500 plus VAT, ex location

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 82 Nm tool taper MAS BT 40 table surface area 630 x 500 mm max. table load 200 kg Colinot Uv Dfepg Isrb Swivel range -5 / +110 ° rotation range 360° ° T-slots 7x 14 x 63 mm number of toolpositions 16 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 17 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m 5 Axis CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - swivel-rotary-table : controlled B&C-Axis / only positioning - Operating-Hours.: Power-On: ca. 37.700h / Spindle-Runtime: ca. 10.800h

Condition: excellent (used), Year of construction: 1978, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display. The machine is in very good condition and comes from a government training department. Rigid table, SK 40 spindle mount, accessories: various collets and milling arbors, counterholder. Very good, operational condition. Can be demonstrated under power upon request. Celov U Rh Njinpg Isrb

Year of construction: 2015, Condition: used, Empty weight: 1.400 kg Dimensions (LxBxH): 140 x 138 x 200 cm - Year: 2015 - Documentation available: Yes - CE mark available: Yes - Control: CNC - Motor power: 1.5kW - Transport dimensions: 1400mm x 1380mm x 2000mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Crslev Stkueinpg Isb Bram van Summeren

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, machine/vehicle number: 111146, the machine has an IKZ 22 bar. Chip conveyor, handwheel, Heidenheim control 530 machine is sold without tools without vice technical condition very good, can be inspected at any time without electricity. Colisu A Azujnpg Iorb

Year of construction: 2000, Condition: ready for operation (used), . N.2 SQUADRE DA FRESA - USATE - Cslinpov Rhuxsg Ierb OVERALL DIMENSIONS: 1200 x 1000 x 550 mm

Condition: used, Milling machine miller, mill Model: Conventional Manufacturer: TOS Type: FGH 32 Cjlsvq Uqtoinpg Iorb Year of manufacturing: 1988 Digital readout: Mitutoyo Travel: 900x350x400mm Spindle-speed: 32-1400 rpm Table: 1250x360mm Spindle-take: SK40 Spindle-motor-power: 7,5kW Machine-dimensions: 2400x1900x2200mm Machine-weight: 2800kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,958 h, machine/vehicle number: 121113, used milling machine IKZ 22 bar chip conveyor handwheel technical condition very good. The machine is sold without tools and without accessories under power Inspection possible at any time. Cslinou A A Dcspg Iorb

Year of construction: 2007, operating hours: 6,288 h, Condition: used, Empty weight: 1.000 kg Dimensions (LxBxH): 220 x 160 x 240 cm Price: On request - Year: 2007 - Documentation available: Yes - CE mark available: Yes - Serial number: 1062742 - Operating hours: 6288 Colisv S Dygenpg Isrb - Control: CNC - Transport dimensions: 2200mm x 1600mm x 2400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Price: On request CNC Digital type: UNIMAX Number of axes: 3 Travel x: 1020mm Celinovr Uvxepg Ijrb Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Documentation available: Yes - CE mark available: Yes - Control: CNC - Motor power: 15.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Operating hours: 63,151 h, Condition: used, Empty weight: 3.000 kg Dimensions (LxBxH): 205 x 260 x 210 cm Price: On request - Documentation available: Yes - Serial number: 65391 - Operating hours: 63151 - Transport dimensions: 2050mm x 2600mm x 2100mm (l x w x h) - Transport weight [kg]: 3000kg Cslisvtxpxonpg Ierb - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1973, Condition: used, - Year: 1973 - Documentation available: Yes Crslev Ewg Tjinpg Isb - Serial number: 1626 - Control: Conventional - Motor power: 1.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Milling machine, VMC Model: CNC Manufacturer: Leadwell Type: VMC-40 Year of manufacturing: 1997 Control: Mitsubishi Cjlinpgovq Um Ie Iorb Travel: 1020x510x510mm Spindle-speed: 8000 rpm Table-dimensions: 1200x500mm Spindle-take: ISO40 Machine is tested (with video). Tooling included, machine-vices not. - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1978, Condition: used, Price: On request Colisv Tvk Tonpg Iorb - Year: 1978 - Documentation available: No - Serial number: 086604 - Control: Conventional - Motor power: 12.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Empty weight: 3.200 kg Dimensions (LxBxH): 300 x 230 x 200 cm Price: On request - Documentation available: No - Control: Conventional - Transport dimensions: 3000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cslinpjvywd Usg Iorb Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2007, Condition: used, Empty weight: 2.500 kg Dimensions (LxBxH): 170 x 210 x 230 cm Price: On request - Year: 2007 - Documentation available: Yes - CE mark available: Yes - Serial number: 750283 - Control: CNC - Motor power: 7.0kW - Transport dimensions: 1700mm x 2100mm x 2300mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Cslisvy N E Rsnpg Isrb

Condition: used, Empty weight: 2.000 kg Dimensions (LxBxH): 245 x 210 x 186 cm - Documentation available: Yes - Control: CNC - Transport dimensions: 2450mm x 2100mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Colinpovtlx Hjg Iorb Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1984, Condition: used, Empty weight: 2.500 kg Dimensions (LxBxH): 160 x 185 x 235 cm - Year: 1984 - Documentation available: No Colinpovtapaeg Ierb - Control: Conventional - Motor power: 2.5kW - Transport dimensions: 1600mm x 1850mm x 2350mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1996, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Cjlinpevtfr Teg Ijrb Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE mark available: Yes - Serial number: 11676-FBZ - Control: CNC - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1986, Condition: used, Empty weight: 2.000 kg Cjlinevr Uvfopg Iorb Dimensions (LxBxH): 190 x 165 x 230 cm - Year: 1986 - Documentation available: No - Serial number: - Motor power: 6.0kW - Transport dimensions: 1900mm x 1650mm x 2300mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren