Year of construction: 2025, Condition: new, Functionality: fully functional, The “little economic miracle” is now also available as 5 axis machine. On the same mineral diecast basement as our HSC 350 MG the HSC 5A-125 MG was born. Therefore you can mill a 125mm cube (max. part diameter 150mm) from all sides and all directions, without remounting! And even much bigger parts are possible when you do not need all working directions the same time. With only 900kg still easy to handle but solid and strong enough for superior cutting volume and outstanding surface quality. The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. Creliov Uw Tlemw Uceb Our HSC 5A-125 MG is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m Crelisvmzihemw Uceb with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment *

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Universal head, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, Crjlisvz A Rijmw Ucsb 60 station toolchanger, coolant, Interlocked guards.

Condition: reconditioned (used), Universal tool milling machine cover FP1: Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks -New paint -exchange of various signs -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump Celimw Uohv H Spscsrb -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. The machine transport and various accessories we offer you with pleasure.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 52,715 h, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Number of axis 5 Croljvb N Nrsimw Ucjb Movement X-Axis Movement 800 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm A-Axis Movement +90° to -90° C-Axis Movement 360° Additional Equipment measuring probe not included This 5-axis Hermle C 800 U was manufactured in 1998. A CNC universal milling machine featuring a swivel rotary table with a 280 mm diameter, it operates with a Heidenhain TNC 430 CNC and a spindle cone of SK 40. With 67,073 operating hours, it remains in good condition. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1994, x-travel 1200 mm y-travel 500 mm z-travel 575 mm Creliev T Nq Tsmw Ucsb table-size 1700 x 400 mm spindle taper ISO 40 spindle turning speed range 32 - 1600 U/min total power requirement 9,0 kW weight of the machine ca. 3,5 t dimensions 2,2 x 2,4 x 2,1 m Universal milling machine - Digital display - Tool cabinet with contents - horizontal counterholder - Documentation - ARNO hydraulic vise - Coolant system - Machine feet

Condition: used, Wanderer 2DU900 Mechanical milling machine for iron, with accessories Cslewa A Absimw Ucjrb

Condition: used, Year of construction: 2008, Technical details: x-travel: 6500 mm y-travel: 1400 mm z-travel: 1000 mm table surface area: 7000 x 1100 mm milling head speed: 15 - 4000 U/min spindle taper ISO: 50 rapid speed: 20 m/min feed speeds: 1 - 10000 mm/min total power requirement: 75 kW weight of the machine ca.: 30 t with CNC SIEMENS 840 D autom indexing head 0,001 x 0,001 autom toolchanger 100-pockets through spindle coolant 30 bar Crslevmz I Rjimw Uceb chip conveyor *

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 42,000 rpm, table load: 60 kg, overall weight: 6,000 kg, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. Crelimw Uott Atwocob The machine is completely overhauled, tested and measured in our company. The machine meets the new machine tolerance again! Travel paths: X455mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - 42-way tool changer - High-precision cooling device for the entire machine (hysteresis +/- 0.15K) - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/cone angle) and wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - HSK40E spindle with max. 42,000 rpm - Erowa ITS100 zero point clamping system integrated in the machine table - Automation package for retrofitting the machine with a pallet changer - Handbox A tour of the machine in Ready-to-use condition is possible at any time. You are welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: repair required (used), Functionality: limited functionality, Donau Sys machine: - Table dimensions: 3000 x 700 mm Crelimjwayryjw Uceb - Travel: X 2900 Y 700 Z 700 - Magazine for 7 tools - Spindle cone SK40 - belt transmission - Spindle speed 3000 rpm - Chip conveyor - Cooling around the spindle and through the spindle - Mitsubishi Electric MMIV 7.5.11 control - German language. Currently the machine is for a major overhaul. It worked until 2024. Dismantled from the production line - functional. Stored under a roof. It has not been used for a year. The last photo shows the machine in July 2024 at the time of dismantling from the production line.

Condition: ready for operation (used), Brand: CORREA Model CF-17 Type : FIXED BED Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-3000 rpm Range : 5-5000 Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Csliev D Rqpjmw Ucsrb Machine weight: 9.000 kg

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Cjlimwsv T Nqys Ucorb Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Cjlimjtvmtkow Ucorb

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations Cslimw Ueway I Uscorb autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: refurbished (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 60,000 m/min, feed rate Z-axis: 60,000 m/min, spindle speed (max.): 36,000 rpm, table load: 800 kg, overall weight: 12,000 kg, Equipment: documentation/manual, Used HSC machine RXP800 -overhauled- Crjlett Agyjimw Ucjb Working area: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 400 mm The clearance height between the spindle nose and the machine table is 565 mm. Drives of the linear axes: - Linear motors in all axes. Feed rates 0 - 60,000 mm/min in all linear axes. Spindle: - HSK-E50 - Spindle speed rpm: 36,000 - Tool changer positions: 30 Equipment - Network connection: - Handbox - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - 3D measuring probe - Remote maintenance Team Viewer - Workpiece cleaning - Simulation RMSCut with cut-out function - Minimum quantity lubrication - Emulsion cooling - Extraction Transport dimensions of machine: W 2,830 x L 4,100 x H 3,050 mm Weight: approx. 13,000 kg The machine is completely checked, measured and overhauled in our company. Please arrange a viewing appointment with us.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Kunzmann WF7 tool milling machine with Heidenhain iTNC 530 contouring control Excellent CONDITION CE compliant!! Technical data: >> Year of manufacture 2004 Machine no. 370546 >> Milling table clamping surface 800 x 425 mm Clamping slots 6 Slot width 14 H 7 Slot spacing 63 mm Maximum load 300 kg >> Speeds up to 5000 min-1 >> Feed range X and Y axis 10 m/min. Z axis 7.5 m/min >> Rapid traverse X and Y axis 10 m/min. Z axis 7.5 m/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Power consumption 15KVA Accessories and equipment: >> Heidenhain iTNC 530 contouring control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Fully protective cabin >> Spray gun in the interior >> Coolant system Crjlimwev Hp Sqo Ucsb About the machine: A Kunzmann WF7 tool milling machine with a Heidenhain iTNC 530 contouring control is offered. This universal milling machine is in very good condition. A very easy-to-use control system. The machine also has hydraulic clamping vertically and horizontally. Converting from vertical to horizontal is very easy, by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power on.

Condition: excellent (used), Year of construction: 2004, Mazak VTC 300 C II MAZATROL 640M Year 2004 TECHNICAL FEATURES Table dimensions mm 2.000 x 760 X axis travel 1740 mm Y axis travel 760 mm Z axis travel 660 mm Max weight on the table Kg 1400 Rapid feeds X / Y / Z m / min 36/36/36 Cjliek H D Nksmw Ucorb Spindle speed 12,000 rpm Motor power kW 18.5

Year of construction: 1988, Condition: good (used), Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Crjlimw Uork Aaaocob

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Cslijtp Nyfsmw Ucsrb

Condition: good (used), Year of construction: 1991, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Cjlimw Uotqclhscerb

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Crslsuvgnqsimw Ucob

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Crslioumcmqomw Uceb

Condition: good (used), Year of construction: 1975, Deckel FP2 tool milling machine with adjustable angle table, 2-axis Heidenhain digital readout, SK 40 spindle holder. Accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Crelimwouclbno Ucob

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Crslimw Usu Ezb Eecsb

Condition: excellent (used), Year of construction: 1981, Deckel FP3 Active tool milling machine with 3-axis Heidenhain TNC 111 digital display, adjustable angle table, SK 40 spindle mount, accessories: various collets and milling mandrels, counterholder. Very good, operational condition. Can be demonstrated under power by arrangement. Celimw Ujvl E Hzjcerb