Year of construction: 1985, Condition: used, machine/vehicle number: 2810-3870, Fully functional Electric handwheel Dialog 4 control Many optional accessories Documentation available Dsb Eottgt Djq Uqhsut Electrical documentation available

Condition: excellent (used), Year of construction: 1994, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 001, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 10,000 rpm, total height: 2,250 mm, total width: 1,550 mm, total length: 1,800 mm, table width: 500 mm, type of input current: three-phase, table load: 100 kg, overall weight: 2,200 kg, input voltage: 400 V, control cabinet height: 1,460 mm, control cabinet length: 690 mm, control cabinet width: 1,200 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, 3 axis CNC-milling machine with a high speed spindle. Frame built out of ground plutonic rock (Granite, same as measuring and control surface plates) sitting on a welded steel frame. Linear bearings and ball screws made by high end German company (specific name lost), spindle is made by Spintech (German), water cooled and has an ER12-collet holder, pneumatic tool changer. Servos are Robbin Myers. With proper settings and fresh tools this machine can mill within 0.005mm. CNC operating system is HEIDENHAIN. Most of its working life it has been milling high precision anodes in carbon positives for spark-erosion cutting, so it has never been exposed to heavy forces, last ten years it has worked very few hours as a hobby machine cutting plastics and some small amount of brass. Spindle and the X-axis Angular contact ball bearings has been refurbished about 3 years ago and has seen very little use after that. Djb Eovgrmqjq Uqhjut

Year of construction: 1988, Condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Dob Eq Uowaa Insqhsut

Condition: ready for operation (used), Year of construction: 1990, Available immediately from location: Reckermann Milling Machine Type Delta 1300 Year of manufacture 1990 Table 1400 x 400 Travel X/Y/Z 1000/400/450 mm SK 50 Spindle speeds 60 – 3600 rpm Drive 12.5 kW Dividing head Many tools Heidenhain 3-axis digital readout Dsb Eq Uov Uh A Dsqheut Weight 4 tons Price €4,500 plus VAT, ex location

Condition: excellent (used), Year of construction: 1978, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display. The machine is in very good condition and comes from a government training department. Rigid table, SK 40 spindle mount, accessories: various collets and milling arbors, counterholder. Very good, operational condition. Can be demonstrated under power upon request. Dujbsv U Rh Ns Eq Uqhot

Year of construction: 2000, Condition: ready for operation (used), . N.2 SQUADRE DA FRESA - USATE - OVERALL DIMENSIONS: 1200 x 1000 x 550 mm Dob Eqov Rhuxe Uqhsut

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model iTNC 530 HSCI Djb Eq Uqov Rr R Rjhjut Movement X-Axis Movement 6000 Y-Axis Movement 2000 Z-Axis Movement 1200 This 5-axis PROMAC ETESIAN HMC. A PORTALE was manufactured in 2010, ideal for complex and precise gantry milling applications. Consider the opportunity to buy this PROMAC ETESIAN HMC. A PORTALE gantry milling machine. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Dueb Ejdr E Apeq Uqhjt Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Universal head, Heidenhain iTNC530, Debevz A Rij Eq Uqhsut ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, machine/vehicle number: 111146, the machine has an IKZ 22 bar. Chip conveyor, handwheel, Heidenheim control 530 machine is sold without tools without vice technical condition very good, can be inspected at any time without electricity. Dob Esu A Azusq Uqhsut

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW Duobovmzihs Eq Uqhst total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment *

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 42,000 rpm, table load: 60 kg, overall weight: 6,000 kg, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, tested and measured in our company. The machine meets the new machine tolerance again! Travel paths: X455mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - 42-way tool changer - High-precision cooling device for the entire machine (hysteresis +/- 0.15K) - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/cone angle) and wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer Djb Eq Ustt Atwoqhout - Minimum quantity lubrication - HSK40E spindle with max. 42,000 rpm - Erowa ITS100 zero point clamping system integrated in the machine table - Automation package for retrofitting the machine with a pallet changer - Handbox A tour of the machine in Ready-to-use condition is possible at any time. You are welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 52,715 h, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Dueb Ejvb N Nrsq Uqhot Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm A-Axis Movement +90° to -90° C-Axis Movement 360° Additional Equipment measuring probe not included This 5-axis Hermle C 800 U was manufactured in 1998. A CNC universal milling machine featuring a swivel rotary table with a 280 mm diameter, it operates with a Heidenhain TNC 430 CNC and a spindle cone of SK 40. With 67,073 operating hours, it remains in good condition. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Year of construction: 2025, Condition: new, Functionality: fully functional, The “little economic miracle” is now also available as 5 axis machine. On the same mineral diecast basement as our HSC 350 MG the HSC 5A-125 MG was born. Therefore you can mill a 125mm cube (max. part diameter 150mm) from all sides and all directions, without remounting! And even much bigger parts are possible when you do not need all working directions the same time. Dsb Eq Uqsv Uw Tljheut With only 900kg still easy to handle but solid and strong enough for superior cutting volume and outstanding surface quality. The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. Our HSC 5A-125 MG is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door

Condition: ready for operation (used), Brand: CORREA Model CF-17 Type : FIXED BED Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-3000 rpm Range : 5-5000 Spindle power : 17 kw Djb Eq Uqev D Rqpshsut Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,958 h, machine/vehicle number: 121113, used milling machine IKZ 22 bar chip conveyor handwheel technical condition very good. The machine is sold without tools and without accessories under power Inspection possible at any time. Dsb Eq Uqeu A A Dcohout

Condition: used, Year of construction: 2008, Technical details: x-travel: 6500 mm y-travel: 1400 mm z-travel: 1000 mm table surface area: 7000 x 1100 mm milling head speed: 15 - 4000 U/min spindle taper ISO: 50 rapid speed: 20 m/min feed speeds: 1 - 10000 mm/min total power requirement: 75 kW weight of the machine ca.: 30 t with CNC SIEMENS 840 D autom indexing head 0,001 x 0,001 Deb Eevmz I Roq Uqhsut autom toolchanger 100-pockets through spindle coolant 30 bar chip conveyor *

Condition: refurbished (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 60,000 m/min, feed rate Z-axis: 60,000 m/min, spindle speed (max.): 36,000 rpm, table load: 800 kg, overall weight: 12,000 kg, Equipment: documentation/manual, Used HSC machine RXP800 -overhauled- Working area: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 400 mm The clearance height between the spindle nose and the machine table is 565 mm. Djbjtt Agyo Eq Uqhjut Drives of the linear axes: - Linear motors in all axes. Feed rates 0 - 60,000 mm/min in all linear axes. Spindle: - HSK-E50 - Spindle speed rpm: 36,000 - Tool changer positions: 30 Equipment - Network connection: - Handbox - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - 3D measuring probe - Remote maintenance Team Viewer - Workpiece cleaning - Simulation RMSCut with cut-out function - Minimum quantity lubrication - Emulsion cooling - Extraction Transport dimensions of machine: W 2,830 x L 4,100 x H 3,050 mm Weight: approx. 13,000 kg The machine is completely checked, measured and overhauled in our company. Please arrange a viewing appointment with us.

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head Dusb Eqjv T Nqys Uqhjt - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet

Condition: reconditioned (used), Universal tool milling machine cover FP1: Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 Dsb Eq Uohv H Spsqheut -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks -New paint -exchange of various signs -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. The machine transport and various accessories we offer you with pleasure.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Kunzmann WF7 tool milling machine with Heidenhain iTNC 530 contouring control Excellent CONDITION CE compliant!! Technical data: >> Year of manufacture 2004 Machine no. 370546 >> Milling table clamping surface 800 x 425 mm Clamping slots 6 Slot width 14 H 7 Slot spacing 63 mm Maximum load 300 kg >> Speeds up to 5000 min-1 >> Feed range X and Y axis 10 m/min. Z axis 7.5 m/min >> Rapid traverse X and Y axis 10 m/min. Z axis 7.5 m/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Power consumption 15KVA Accessories and equipment: >> Heidenhain iTNC 530 contouring control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Fully protective cabin >> Spray gun in the interior Dob Ejv Hp Sqsq Uqhout >> Coolant system About the machine: A Kunzmann WF7 tool milling machine with a Heidenhain iTNC 530 contouring control is offered. This universal milling machine is in very good condition. A very easy-to-use control system. The machine also has hydraulic clamping vertically and horizontally. Converting from vertical to horizontal is very easy, by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power on.

Condition: used, Wanderer 2DU900 Mechanical milling machine for iron, with accessories Dujb Eq Uewa A Absqhot

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 Dueb Eq Usway I Uoqhet 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: repair required (used), Functionality: limited functionality, Donau Sys machine: Duobjwayryo Eq Uqhet - Table dimensions: 3000 x 700 mm - Travel: X 2900 Y 700 Z 700 - Magazine for 7 tools - Spindle cone SK40 - belt transmission - Spindle speed 3000 rpm - Chip conveyor - Cooling around the spindle and through the spindle - Mitsubishi Electric MMIV 7.5.11 control - German language. Currently the machine is for a major overhaul. It worked until 2024. Dismantled from the production line - functional. Stored under a roof. It has not been used for a year. The last photo shows the machine in July 2024 at the time of dismantling from the production line.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Dujb Eq Ustvmtkjqhet