Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 Fgjljvc Awrsn S N Tbjb interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: excellent (used), Year of construction: 2009, Tool milling machine with CE mark Fgoln Sslq Epdj N Tbob Tool holder SK 40 Drilling quill 3-axis feed with rapid traverse

Condition: used, Year of construction: 2006, x-travel 1.760 / 2x 6 mm y-travel 600 mm z-travel 800 mm Control iTNC 5 Heidenhain turning speed range - main spindle min/-1 swivellable indexing 1 ° tool taper SK 40 DIN 69 871 A table surface area 2.380 x 600 mm table surface area R: 1.000 x 600 mm Feln S N Tevzckcjbsgb table surface area L: 1.350 x 600 mm number of T-slots 7 T-slot - width 14H9 mm number of toolpositions 22 pos. tool taper SK 40 max. tool diameter 85 mm max. tool-dia with free toolbox 135 mm max. tool length 400 mm max. tool weight (L=400mm) 5,5 kg max. workpiece weight (L=200mm) 8,0 kg total power requirement 55 KVA weight of the machine ca. 14 t dimensions of the machine ca. 6,8 x 4,0 x 3,2 m Travelling column machining centre AXA - VHC 2-1760-S / E

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Fslevy A Tnon S N Tbjgb Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: used, Year of construction: 1988, Functionality: fully functional, last week put away working due to replacement by profile milling machine. Felev Idt Ejn S N Tbsgb Cover not shown are included.

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Fjln S N Tjir U H Eobjgb For further information or contact options, please visit our website

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions Fsln S Neu Nc Hko Tbsgb *

Condition: excellent (used), Year of construction: 1997, Europa Centurion CU5 Ram Type Milling Machine (Like Huron) Excellent condition - we welcome any inspections! Year 1997 Fgsln Sjvm Abrs N Tbjb Specification - Table size 1635 x 460mm No of T Slots 5 Width of T slots 18mm Distance between slots 80mm Longitudinal travel 1300mm Vertical travel (knee) 440mm Cross Travel (ram) 650mm Min Spindle nose to table surface 40mm Spindle Taper 50INT No of spindle speeds 27 Spindle speed range 30-2050rpm Longitudinal powerfeed 10 - 1000mm/min Cross powerfeeds 10- 1000mm/min Vertical powerfeeds 5 - 500mm/min Longitudinal rapid feed 2800mm/min Cross rapid feed 2800mm/min Vertical rapid feed 1400mm/min Spindle motor 7.5kW Max Table load 1800kgs Dimensions - L 2010mm x W 2621mm x H1950mm

Condition: good (used), Travel of the X-axis: 700 mm Travel of the Y-axis: 450 mm Travel of the Z-axis: 450 mm Table size: 760 x 420 mm Fgeln Soq Dpz Do N Tbeb Spindle holder: SK40 Spindle speeds: 32 - 1600 rpm Spindle stroke: 125 mm Digital display Complete with: - Table can be rotated and tilted - Power supply via spindle quill - Feed/rapid traverse on all axes - Coolant device Motor power: 6.5 kW Country of origin: Germany Machine weight: 3000 kg Machine LxWxH: 2300 x 2000 x 1850 mm

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm Foln S N Tovy A Tbobegb A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Fgslsv Ucbnjn S N Tbob Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, spindle speed (max.): 18,000 rpm, workpiece length (max.): 2,400 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 300 mm, number of slots in tool magazine: 18, TECHNICAL DETAILS Maximum workpiece size: 1,500 x 2,400 mm Maximum workpiece height: 300 mm Milling depth: up to 290 mm Panel length: 2,250 mm Slot width: up to 10 mm Housing machining: up to 1,600 x 1,000 x 1,600 mm Front and rear wall machining: 1,500 x 1,000 mm Spindle & tool change Foln Sjv Rd Ubo N Tbsgb Max. speed: 18,000 rpm Spindle mount: SK 30 Tool magazine: 18 positions Tool positions in the bar: 18 Circular milling machine: Threads up to M63 Control & electrical system Control: PC (not included) Rated current: 32 A MACHINE DETAILS Machine weight: approx. 2,700 kg Space required: approx. 3.6 x 2.6 x 2.8 m

Condition: used, Year of construction: 1984, Technical details: x-travel: 400 mm y-travel: 100 mm z-travel: 100 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: 0,8 kW machine weight approx.: 132 kg space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m Fgeln S N Tou Nc Nxjbob This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V *

Condition: like new (used), Year of construction: 2016, Ajax AJUM 350 Horizontal Milling Machine Excellent condition - Like new! With Arbor & support arms DRO Pendant control Year 2016 Manuals Fjln S Novm Amnj Tbogb

Condition: used, Year of construction: 1995, Functionality: fully functional, milling machine Foleunrrfon S N Tbjgb

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, Functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Fslsr E D Eaen S N Tbjgb Suction Ruwac Zone 22

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm Fgsln S Neu Nda Ee Tbjb z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm Fgjlnou Ndcme S N Tbob y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: used, Technical details: x-travel: 1600 mm y-travel: 400 mm z-travel: 400 mm w-axis: 100 mm control: Sienumerik spindle taper ISO: SK50 spindle head swivable left - right: manuel ° Fgsln Ssu Nddwo N Tbsb Table dimensions: 1600 x 400 mm machine weight approx.: 4000 kg dimension machine xH: 2,0 x 2,33 x 2,5 m with 3-way digital measuring range display incl. accessories/tools with holder *

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - 1800 / 18 step U/min feed:: X+Z: 0,3 - 1800 mm/min feed:: Y: 0,3 - 900 mm/min. rapid traverse : X/Z: 1800 / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Fgoln S Neu Ndd Rs Tbjb Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice Fgsln Sjvc Avhs N Tbob *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system Felovc Avujn S N Tbegb *

Condition: used, Year of construction: 1986, Technical details: x-travel: 1120 mm y-travel: 345 mm z-travel: 400 mm spindle taper ISO: SK50 spindle head swivable left - right: 90° ° Distance rear edge of table to column guideway: min./max.: 125 / 470 mm max. torque on the spindle: 280 kpm range of revolution per miute: 28 - 1400 / 18step U/min feed:: X/Y: 16 - 800 und Z: 5 - 250 mm/min Table dimensions: 1600 x 460 mm table surface area: 1400 x 330 mm table load: 1,5 t total power requirement: 14,5 kW machine weight approx.: 3900 kg dimension machine xH: 2,7 x 2,0 x 2,1 m dimensions electric cabinet: 0,47 x 0,8 x 1,5 m Equipment: Foln S Nsu Iy Hlj Tbegb 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice) *

Condition: used, Year of construction: 1978, Technical details: x-travel: 1200 mm y-travel: 500 mm z-travel: 650 mm w-axis: 90° rechts/links table-size: 1600x500 mm revolution per minute: 24 - 1600 / 12 step U/min tool taper: SK 50 distance spindle nose and table: min/max: 150/800 mm distance spindle center to column: min/max: 200/800 mm table surface area: 1200 x 520 mm total power requirement: ca. 25 kW weight of the machine ca.: 5600 kg dimension machine xH: 2,4 x 3,0 x 2,4 m dimensions electric cabinet LxWxH: 1,1 x 0,5 x 1,8 m Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device Folneu Nc Rvs S N Tbegb - equipped with measuring system manufacturer Millvision *

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Fgjlnsvbhcds S N Tbjb Tool accessories (comparable in the photo) *