Condition: ready for operation (used), Year of construction: 1988, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 2,066 rpm, heidenhain 3-axis screwdriver Dkjlq Atorr U D Iep Rol weight 8000KGS external electrical cabinet automatic lubrication head sa 50 2066rotations table 2235X700MM strokes 1900X1000X1000MM

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 Dslq Atpjd Hl Sto Rekl feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: excellent (used), Year of construction: 2011, New 2011 Axis X 785 mm Axis Y 470 mm Axis Z 530 mm CNC PROTOTRAK PMX Table length 900 mm Table width 500 mm Max. part weight 460 kg Number of tool pockets 16 Spindle taper BT40 Max. spindle speed 8000 rpm Spindle motor power 11 kW ----- Dkelq Atpstt Ivbo Rel Length x width x height 2870.0 × 2246.0 × 2743.0 Weight 3410 kg

Condition: defective spare-parts repository (used), Year of construction: 1980, x-travel 500 mm y-travel 430 mm z-travel 400 mm total power requirement 3 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,3*2,3*1,8 m No. 2179 Universal tool milling machine HERMLE UWF-801 Modernization 1999 Fixed table 800 x 350 mm, chip tray, automatic tool clamping, coolant device, operating instructions, electronic handwheel in the control panel. Heidenhain TNC-124 line control Dkslqsvpacrj Atp Rjl Spindle ISO-40, Speed range 45-2000 rpm, Feed range 4-1600 (1000) mm/min, Rapid traverse 1.6 (1) m/min. Space requirement approx. 2.3 x 2.3 x 1.8 m, Weight approx. 1300 kg. -- Machine currently not ready for operation (hobbyist machine)--

Year of construction: 1988, Condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Delqebu Em Ae Atp Rjkl Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: Delq Aovn N Hdjtp Rekl >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: good (used), Pear 1FC4 tool milling machine Manufacturer: PEAR Model: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm ratio: 1:1 table dimensions (mm x mm): 600x400 length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 spindle speed: up to 12.000 rpm Distance between table and mandrel: 530 mm motor hp: 0,75 rpm: 700-4400 Delq Ajl Sm Ehetp Rekl weight: approx. 1800 kg Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Table size 650 x 250 mm X/Y/Z - 400/330/475 mm Spindle speeds 63-2800 rpm Spindle taper ISO 30 Equipped with: 3-axis dro Heidenhain Collet chuck Various collets - more than 100 pcs. 7 pcs. Vices 23 Toolholders Dkolq Atpor E Nd Ds Rol Dividing head w/discs Rotary table 250 mm dia. Angle plate Coolant Lots of other accessories - see photos

Year of construction: 1983, Condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Accessories/equipment: Swivel head; condition: good Weight: 4 t Dolqofli Afo Atp Rskl Dimensions: 2.000 x 2.000 x 2.400 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 6.7 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30 [m/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY Dkelovt Eifeq Atp Rsl - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - Type of divisor : 4e axe CNC intégré * Coolant tank * with high-pressure pump - Coolant through spindle - Electric transformer

Year of construction: 1993, Condition: good (used), CNC universal milling machine DMG MORI Type: MH 600 C Doloiihxheq Atp Rekl Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition.

Condition: new, Year of construction: 2024, Functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm Dslq Atovupa Rep Rekl - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min Dkelq Aovtzkxstp Rjl - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Dkjlsl Dvx Eeq Atp Rel Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: reconditioned (used), Year of construction: 2008, CNC universal milling & drilling machine DECKEL MAHO DMC 60 T With path control Heidenhain iTNC 530 Year of construction: 2008 Traverse paths: X 780 Y 560 Z 560 Speed range: 0 - 18,000 rpm infinitely variable With the following accessories: NC rotary table with 2-fold pallet changer 630 mm x 500 mm Vertical tool changer with 60 magazine positions Controlled milling head (B axis) IKZ 40 bar Chip conveyor Integrated screw conveyor Rotoclear Electronic handwheel Operating mode 3 + 4 Chip flushing gun Dslq Atpsrumils Rjkl Full protection cabin with interior lighting 3-piece height-adjustable machine shoes Operating instructions

Condition: new, machine/vehicle number: 280261 0001, BENEFITS: -Compact entry-level model in the field of servos -Low maintenance -Control with integrated PC controller -Compact desktop machine -Ideal for use in schools and training, as well as orthopedic milling machines and small series production SUITABLE FOR: -Milling -Drilling -Measuring -Cutting -Dispensing -Glueing -Casting -Burring -Polishing -Testing -Scanning -Scaling -Printing -Placing Dkolqolnikko Atp Rol -Mounting -Screwing -Etc.

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm table: 1250 x 335 mm Dkslqjh Rawfe Atp Rel table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Connection: 6 kW Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm Dkelq Atpevunrfe Rsl - Weight: 1,600 kg

Year of construction: 2007, Condition: excellent (used), ANAYAK HVM 3800 traveling column milling machine with table Year of construction: 2007, very well-kept. CNC control HEIDENHAIN iTNC 530 Technical data: X axis (lengthways) 3,200 mm Y axis 1500 mm Z axis 1800 mm Table load: 25t Spindle mount ISO 50 DIN 69871 Spindle speeds 4,000 rpm Dkoljhlqiuoq Atp Rel milling head index 2.5 ° B + C axis each Drive power: 30KW, 2-stage gearbox coolant supply

Condition: good (used), Year of construction: 2007, Brand : SORALUCE Model : TA 20 Type: BANCADA FIJA Cnc : HEIDENHAIN iTNC 530 Year : 2007 Table size : 2000 x 800 mm Number of T slots : 4 Slots dimensions: 22 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Dkelqjt Iwtue Atp Rol Rapid traverse: 20.000 mm/min Spindle type: Universal ISO 50 Turning ranges : 20-3000 rpm Spindle power : 22 kw Hydraulic clamping tools :Included CE fairing :Included Work piece weight on table : 4.000 kg Machine weight: 10.000 kg Electronic wheel : Heidenhain HR-410 Machine dimensions : 6.500 x 3.300 x 2.740 mm Machine equipped with: Magnetic table 1.500 x 600 mm 2 Chip conveyor

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Deckel KF 3 S type Copy Milling Machine Very good condition Dkolq Atpev E Rw So Rel

Condition: excellent (used), Year of construction: 2001, operating hours: 8,155 h, Functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, table width: 850 mm, table length: 2,000 mm, overall weight: 13,500 kg, power: 30 kW (40.79 HP), CME FS-2 bed milling machine with only 8155 hours control Heidenhain 426B incl measuring probe and complete set of manuals Dkjloquqq Aoq Atp Rsl

Year of construction: 1982, Condition: used, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, Djlq Aeiqkc Iotp Rekl travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Bed Type Milling Machine - Universal / Brand: KIHEUNG / PEGASUS / Type: KNC-U800 / Year of construction: 03/2000 The machine can be inspected by appointment under power. Condition: Well-used, in good operational condition (no repairs needed). The machine is in the first ownership. Operating hours: - Control on: 57.567 h - Machine on: 54.527 h - Program run: 16.474 h TECHNICAL DESCRIPTION: Travels: - X-axis: 1.900 mm - Height from table to vertical spindle nose: 50 - 900 mm - Height from table to horizontal spindle center: 130 - 980 mm - Z-axis: 800 mm Table: - Working surface: 2.300 x 775 mm - Permisssible load max.: 8.000 kg - T-slots: No. 6 x 22H7 - Distance between T-slots: 125 mm Dkelq Atpevm D Exe Rol Feed: - Axis feedrate: 5.000 mm/min - Rapid feedrate: 10.000 mm/min Spindle: - Taper: ISO 50, DIN 69871 - Speed: 3.000 rpm (0~689 / 690~3.000) Motor: - Spindle drive motor: 18,5 kW - Feed drive motor: X-/Y-/Z-axis: 20/20/20 Nm - Coolant pump motor: 500 W - Lubrication pump motor: 90 W - Hydraulic pump motor: 550 W - Floor space approx.: 5,6 x 4,8 x 3,0 m - Machine weight net approx.: 12 tons EQUIPMENT: - CNC control: HEIDENHAIN TNC 426 - Universal milling head manual - Documentation - CE marking NO tool changer ! There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Year of construction: 2005, Condition: ready for operation (used), A CNC precision portal milling and laser cutting machine (combination machine) Wissner is available. Travel X/Y/Z: 3050mm/2050mm/70mm, resolution: 0.001mm. Spindle: Reckerth HFS 1201 quick-change, speed: 36000rpm, peak power: 12kW, holder: HSK 40, spindle hours: 14193h. Laser power: 100W, cutting power with acrylic: 20mm. Including 9x tool holders, tool length sensing, vacuum pump Busch RA0255 D, vacuum clamping plate Professional with 6 switchable sectors and suction device with W.hold and Press for processing flat parts. Documentation available. On-site inspection is possible. Dkelq Aov Ay N Eotp Rol