Condition: ready for operation (used), Functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min Dujbjriulgo Hdg Nyjt total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: used, Tool milling machine BOHLE, swivel and rotatable milling head, XYZ display HEIDENHAIN (disconnected), according to information only limited usability Dsb Hdgevzhwuo Nyout

Condition: good (used), Year of construction: 2003, operating hours: 14,807 h, overall weight: 3,545 kg, input voltage: 400 V, year of last overhaul: 2015, Operating hours approx. 02/2025: Control on: 14807 h, machine on: 76429 h, program run: 39412 h 3D path control Universal milling head with controlled B-axis SK 40 Shelf magazine with 60 magazine spaces SK 40 Infrared measuring probe, Heidenhain TS 641 NFS server Chip conveyor, Blechtechnik GmbH Cooling with extended media line, Bürener Maschinenfabrik GmbH The blue computer terminal in the picture in front of the machine does not belong to the machine The machine is still in use and can be viewed during our opening hours. The SK40 tool holders can be purchased, the tools are not sold. Sale from location without warranty and return. Dismantling and removal must be organized by the buyer. Dob Hsv Ab Rksdg Nyout

Condition: good (used), Clamping table, clamping angle, T-slot table, round table, milling machine table, turning table, cross table, cross-sliding table, boring table -Manufacturer: Scharmann, clamping table drilling table rotatable -Table surface: 1400 x 1000 mm -Travel distance: 1200 mm Djb Hdgjpyk Izo Nyeut -Grooves: 7 pieces 22 mm -Dimensions: see photo -Total dimensions: 3410/1350/H665 mm -Weight: 4600 kg

Condition: good (used), Year of construction: 1971, Universal milling machine Macmon M200B (comparable to cover FP3) Year of manufacture 1971 machine no. 628/2 Traverse path X-axis 600 mm Y-axis travel 310 mm Z-axis travel 390 mm Speed range 37-1900 rpm Feed in 3 axes from 7-380 mm/min Rapid traverse in all 3 axes Vertical & horizontal spindle Vertical quill and horizontal quill extendable - SK-40 Dsb Hdgequp Agj Nysut Tightening system S20x2 Rigid clamping table Coolant device Operating instructions 3-axis Fagor digital readout (X scale counts double) The machine has been technically checked and is fully functional. Spindle runout 0.002mm X-axis backlash 0.75mm Y-axis backlash 0.7mm Backlash Z-axis 0.2mm Installation area LxW: 1500x1500mm Weight approx. 1500kg

Condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/500mm, speed: 5000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 47333h. On-site inspection is possible. Djb Hdg Nevyr Nroysut

Condition: ready for operation (used), Functionality: fully functional, Universal milling machine CME FU-3 is a tool used to machine metal parts or other hard materials by cutting or shaping them with a rotating cutter. It is equipped with a control panel with various buttons and switches to adjust its parameters and operations. Brand CME MODEL FU3 CM TYPE UNIVERSAL CARNERO MOTORIZADO TRAVELS X, Y, Z 1100 x 350 x 700 TABLE DIMENSIONS 1700 x 360 TAPER ISO 50 DIN 2080 SPINDLE ISO 50 DIN 2080 Dueborignwj Hdg Nyjt POWER SPINDLE MOTOR 7.5 MAIN MOTOR POWER 5,5

Condition: like new (used), Year of construction: 1996, Universal Tool Milling Machine from Deckel ( Germany ) apply for toolmaker , mold maker, education and Locksmith Travel : 340x160x340mm Speeds : 40-2000 U/min Taper : SK 40 Duob Hegufhfodg Nyjt Table 600x210mm Travel (X,Y,Z -Achse) 300x140x340mm Spindle: SK 40 Speeds 40-2000U/min Feeds 2-2000 Power supply 50 Hz 3x 380V Motor 1,8KW Weight ca. 700kg Dimension 1000x1600x1000mm

Condition: like new (used), Year of construction: 2008, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Z axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872 Speed range: 3000 rpm Spindle power: 22 kW Feedrates Feedrates: 5000 mm/min Rapid feedrates (X-Y-Z): 20000 mm/min Dusb Hdou S Sq Uog Nyot Weight and dimensions Maximum weight on table: 6000 kg Machine weight approx.: 20000 kg Machine dimensions approx.: 7750 x 4400 x 3100 mm Accesories Guarding New automatic tool changer: ATC-30 Longitudinal rear chip conveyor Electronic handwheel: HR-410 External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical parts Sale price (Ex Work): On request View all technical features

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine Duob Hdg Njnzpx Reyot -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: new, Year of construction: 2022, Functionality: fully functional, 5-axis CNC machining center for processing carbon and glass fiber workpieces, plastics, Ureol, wood. Availability: approx. 4 weeks Machine details: CMS ARES 3618 - Axis travels: X-axis: 3,600 mm Dujb Hdgjiqnzzs Nyst Y-axis: 1,800 mm Z-axis: 1,200 mm B-axis: +/- 120 ° C-axis: +/- 270 ° - Universal tool head (12 kW | max. speed: 24,000 rpm) - Tool magazine: 8-station in-line magazine moving in X-direction - Tool holder: HSK 63F - CNC control: Fanuc 31 IB5 - Vacuum system: 2 x 100 m³/h - Work area cover, pendulum operation, tool measuring system, dust protection, ... Additional services: Installation, commissioning, training possible!

Year of construction: 1992, Condition: ready for operation (used), Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible. Duobsvyirqs Hdg Nyst

Condition: ready for operation (used), Functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: HURON type head lighting lubrication pump feeds on 3 axes visualization on 3-axes vise anti-vibrations Dueb Hsridyredg Nyet

Condition: excellent (used), Year of construction: 1979, machine/vehicle number: 2202-10706, Deckel FP2 Aktif toolroom milling machine in very good TOP condition. Machine Nr.2202-10706 Specifications: - Machine speed: 25 - 2500 rpm - Power feed X/Y/Z infinitely variable 5/500mm/min - Rapid feed X/Y/Z 1500mm/min - X / Y / Z: 400/200/400 mm - Spindle brake - Spindle nose vertical and hor. SK40/M16 - Weight about 1300 Kg Accessories and equipment: - 3-axis Aktif digital Heidenhain TNC113 - coolant system Dueb Hsvwcztsdg Nyot - Central lubrication - machine books Offered is a universal milling machine Deckel FP2 Aktif, in very good TOP condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs very quietly. All guideways are in very good condition. In this newer FP2 model the powerfeed in three axes is infinitely adjustable, the machine has also rapid traverse in three axes. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: ready for operation (used), Immediately available from the customer's factory (machine in use) Subject to prior sale and availability PLATE-EDGE-MILLING-MACHINE / PLATE-EDGE-MILLING-MACHINE PLATE-EDGE-MILLING-MACHINE MADE BY / MADE BY MODEL / TYPE YEAR OF PRODUCTION/ NEW 1984 approx./approx ZUSTAND/CONDITION Betriebbereit / ready for use LIEFERZEIT / DELIVERY-TIME SOFORT / IMMEDIATELY Dob Hdgjvdx S Uj Nysut Längsvefahrweg X Travel longitudinal X 15,900 mm Horizontal feed Z Horizontal travel feed Z 790 mm Vertical feed Y Vertical travel feed Y 500 mm Swivel range of milling spindle Swivel of milling spindle +/- 45 °/degrees Drive power Power 50 kw Milling spindle diameter Milling spindle dia 160 mm Tool holder Taper ISO 50 DIN 2079 Spindle speeds stepless Spindle speeds stepless 50-500 rpm Weight of machine Weight of machine 23.000 Kg

Condition: excellent (used), Control unit new Spindle replaced 400 hours ago X axis 1200mm Y axis 600mm Z axis 850mm Tool changer 24 times 4 and 5 axis available maximum 80 operating hours Year of construction 2001 Speed 9000 Internal cooling 32Bar Accessories 3D infrared probe various milling cutters Clamping device 250 SK 40 holders Tool presetting device (measuring system) Dob Hdgot Sxirs Nyeut

Condition: new, The Duplex stops allow angle cuts from 0-90° very quickly, precisely and continuously. When set to 45°, the miter can be cut on both sides of the workpiece without adjusting the two stops. The dimensions are set using a magnifying glass and a measuring scale for length compensation. All DUPLEX variants can be easily positioned along the entire length of the carriage. No. M64060 Dobevyup Io Hdg Nyout

Year of construction: 2003, Condition: ready for operation (used), Travel X/Y/Z: 3000mm/800mm/1100mm, rapid traverse X/Y/Z: 30m/min, feed X/Y/Z: 30m/min, spindle type: DMS 112, speed: 12000rpm, power: 30kW, torque: 190Nm, tool holder: HSK 63 A, tool positions: 48. Drilling capacity steel: approx. 60mm, milling capacity: approx. 500cm³, tapping capacity: M30, head tilt: +/-90°, table dimensions X/Y: 3500mm/835mm, face plate diameter: 630mm. Machine dimensions X/Y/Z: approx. 7000mm/6000mm/4000mm, weight: approx. 15000kg, control: Bosch type 3 Osa. Including 70bar internal coolant supply, chip conveyor, loading doors for crane loading, 3D radio measuring probe, direct measuring systems for X/Y/Z, cooling unit and other accessories. Documentation available. On-site inspection is possible. Dueb Hdg Nsvyirdjyjt

Condition: excellent (used), Used SCHAUBLIN 53 milling machine - Table dimensions: 1100 x 305 mm. - Travels: X=700 - Y=490 - Z=250 mm. - Spindle taper: ISO 40 - Spindle speed: 3000 rpm. - Number of feeds: 18 Dob Hdgevx Atls Nyout - Feed X, Z: 12 mm/min to 1050 mm/min. - Rapid feed: X=3.5 m/min - Z=1.7 m/min. - Total installed power: 7.5 HP. - Machine dimensions: 1800 x 1600 x H1700 mm. - Weight: approx. 2100 KG

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, X-axis / length 700 mmy-axis / transverse 550 mmz-axis / vertical 500 mmpanel dimensions 1000 x 500 mmtaler range infinitely variable in 3 switching steps 25-4200 rpm Control Heidenhain TNC 407 - TNC 415 Dusb Het D A Sbodg Nyet

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis active digital display Heidenhain in light gray Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 2203-7487 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Hydraulic tightening system >> Weight approx. 1600 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant device Djbevi Ipgs Hdg Nyjut >> Chip tray >> Electrical central lubrication >> Operating instructions, spare parts diagrams, To the machine : We are offering a Deckel FP4M Aktiv universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. The machine has hydraulic clamping. The FP4M was only used occasionally in a state-owned company for training purposes. On this newer FP4 model, the feed rate is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine approaches automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, feed X/Y/Z: 3m/min, table dimensions X/Y: 900mm/530mm, tool holder: ISO40, speed: 4000rpm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2200mm, weight: approx. 2600kg, control: Heidenhain TNC 355, operating hours: 57765h. Including 3D probe, 20x holders, spray protection cabin and coolant pump. Documentation available. On-site inspection is possible. Deb Hdevx Tw Isg Nyeut

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 600mm/450mm/500mm, spindle mount: ISO40, spindle speed: 3150rpm, feed: 3m/min, rapid traverse: 4m/min, connected load: 21kVA, weight: approx. 3300kg, operating hours: 29189h. Documentation available. On-site inspection is possible. Dobsvg Hlns Hdg Nyeut

Year of construction: 2013, Condition: ready for operation (used), Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27000rpm, control: Siemens Sinumerik 840 DSL, weight: approx. 7000kg. An on-site inspection is possible. Dusb Hdgjugmxij Nyst

Year of construction: 2019, Condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Deb Hdg Neuk I Eysyeut