Year of construction: 1999, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool holder: SK40, feed X/Y/Z: 10m/min, rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, T-slot spacing: 63mm. Tool positions: 16, max. tool length: 290mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, weight: approx. 3500kg, control: MillPlus. Documentation available. On-site inspection is possible. Dks Ia Uou T Rilsp Thjl

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis active digital display Heidenhain in light gray Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 2203-7487 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Hydraulic tightening system >> Weight approx. 1600 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant device Dkj Iovi Ipgea Up Thel >> Chip tray >> Electrical central lubrication >> Operating instructions, spare parts diagrams, To the machine : We are offering a Deckel FP4M Aktiv universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. The machine has hydraulic clamping. The FP4M was only used occasionally in a state-owned company for training purposes. On this newer FP4 model, the feed rate is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine approaches automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, X-axis / length 700 mmy-axis / transverse 550 mmz-axis / vertical 500 mmpanel dimensions 1000 x 500 mmtaler range infinitely variable in 3 switching steps 25-4200 rpm Control Heidenhain TNC 407 - TNC 415 Ds Ia Upjt D A Sbe Thskl

Condition: good (used), Year of construction: 1979, Functionality: fully functional, Axes: Dke Ijuihrcja Up Thel X_Table travel: 3000mm Y_CrossRail vertical travel: 1000mm Z_Milling Head - Saddle on CrossRail travel: 1500mm U_Boring Bar vertical travel: 300mm Moving Table Load: max. 20000Kg/m (uniform distribution on table surface) Moving Table usable surface: 4000x1600mm Moving Table total surface: 4900x1600mm Distance between Table and Cross Rail: max 1200mm

Year of construction: 2002, Condition: good (used), Hinge width 300 mm Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel De Ijmdqx Hsa Up Thjkl

Condition: good (used), Year of construction: 1992, Functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller model: TNC415, spindle speed (max.): 6,000 rpm, tool mount: 40 mm, Hello, Dks Ia Up Tevx N Dwshjl we are offering a milling machine that is in good condition. It has been regularly serviced and is fully functional. The machine is ideal for precise milling work and is ready for immediate use. If you are interested or have any further questions, please do not hesitate to contact us!

Year of construction: 1991, Condition: ready for operation (used), X-travel: 600mm, y-travel: 400mm, z-travel: 350mm, clamping surface dimensions: 400x800mm, width T-slots: 14mm, max. workpiece weight: 300kg, connected load: 14kW, control: Heidenhain, length: 1700mm, width: 1700mm, height: 2000mm, weight: 2t, with documentation, an on-site inspection is possible. Do Iaorm S Eis Up Thekl

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm Dj Ijvcf Hpea Up Thskl feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Year of construction: 1991, Condition: repair required (used), A defective CNC universal tool milling and drilling machine Klopp-Korradi is available. Travel X/Y/Z: 1000mm/600mm/500mm, quill stroke: 63mm, spindle center-to-clamping surface distance min./max.: 60mm/560mm, max. workpiece weight: 630kg. Table dimensions X/Y: 1300mm/700mm, groove width: 18mm, groove distance: 90mm, tool holder: SK40, spindle diameter: 60mm, max. spindle torque: 630Nm, speed: 4000rpm. Control system: Heidenhain TNC 360, power supply unit is defective. Documentation available. On-site inspection is possible. De Ia Upot Siazs Thjkl

Condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible. Dkj Ia Up Tsu H H H Aehjl

Year of construction: 2005, Condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/500mm, feed X/Y/Z: 5000mm/5000mm/2500mm/min, feed force X/Y/Z: 20kN/20kN/30kN. Spindle power: 7kW, speed: 3150rpm, spindle torque: 250Nm, spindle mount: ISO40. Vertical table: dimensions X/Z: 500mm/320mm, flute width: 14H8, axis distance: 50mm, number of flutes: 5. Angled table: Dimensions X/Y: 900mm/500mm, flute width: 14H8, axis distance: 50mm, number of slots: 10, machine dimensions X/Y/Z: approx. 1820mm/2050mm/2175mm, weight: approx. 2500kg, control: Heidenhain TNC 310, probe included. Documentation available. On-site inspection is possible. Dkj Ia Up Tjulzliohol

Year of construction: 1984, Condition: ready for operation (used), Table dimensions X/Y: 830mm/700mm, spindle diameter: 30mm, vertical stroke: 150mm, speed: 10000rpm, spindle swivel: -10°/+45°, motor power: 2.2kW, weight: approx. 240kg. On-site inspection is possible. Dks Ievbig Doa Up Thol

Condition: ready for operation (used), X-axis: 500mm, Y-axis: 150mm, Z-axis: 280mm, quill stroke: 55mm, throat depth: 185mm, table dimensions: 700x180mm, groove width: 12mm, weight: approx. 110kg, with base frame. Do Ia Ueumwh Ajp Thjkl

Condition: ready for operation (used), Speed: 5000 rpm, machine dimensions X/Y/Z: approx. 3220mm/2120mm/2120mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 33494h. Documentation available. On-site inspection is possible. Dke Ia Upeunk N Ae Thel

Condition: ready for operation (used), Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible. Dks Ijvu Dfnoa Up Thel

Year of construction: 1976, Condition: ready for operation (used), Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible. Dkj Iaovur Hms Up Thsl

Year of construction: 1989, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/350mm, rapid traverse: 4m/min, spindle speed: 5000rpm, spindle mount: SK40, max. table load: 200kg, table dimensions X/Y: 800mm/360mm. Machine dimensions X/Y/Z: approx. 2200mm/2200mm/1900mm, weight: approx. 2000kg, control: CNC 452, operating hours: 8660h. On-site inspection is possible. The function of the machine is limited, as the buffer battery on the control unit is probably empty. Dks Ia Up Tsuxdirjhel

Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, spindle mount: SK40, speed: 2500rpm, feed: 630mm/min, rapid traverse: 1.3m/min, machine dimensions X/Y/Z: approx. 2300mm/1800mm/1800mm, weight: approx. 1750kg. Including numerous accessories such as new Allmatic HD 100 vice, 16x clamping tools, 3-jaw chuck, edge finder etc. Documentation available. On-site inspection is possible. De Ievhc R Aea Up Thjkl

Year of construction: 2019, Condition: ready for operation (used), A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Do Ia Up Tovf Iy Dehskl

Year of construction: 2008, Condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Dko Ia Upolvu Ruj Thsl

Year of construction: 1975, Condition: ready for operation (used), Rotational speed: 112-3000/min, controls: SHW-NC, an inspection is possible. Do Ia Upopcgy Ue Thekl

Condition: ready for operation (used), Controls: Deckel DIALOG 11E, tools are available, number of operational hours unknown, was maintained regularly, an inspection is possible. Dkj Ia Upjpu A Ekj Thsl

Year of construction: 1989, Condition: ready for operation (used), X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible. Dks Iasq Tc I To Up Thol

Year of construction: 1985, Condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Do Iaslbmupj Up Thokl

Year of construction: 1999, Condition: ready for operation (used), Copying range U/V: 1400mm/1060mm, table longitudinal movement U: 1500mm, column transverse movement V: 1060mm, headstock vertical movement W: 900mm, max. spindle-table distance: 1025mm, probe adjustment range X/Y/Z: 300mm/150mm/250mm, probe mounting swivel range: +/- 15°, speed: 4000rpm. Including documentation, headstock and spindle. Dj Ia Upsh Tkn No Thskl