Year of construction: 1982, Condition: used, x-travel 970 mm Dsb Eufjk H R H Uetijkl y-travel 420 mm z-travel 430 mm Control Heidenhain TNC 135 number of speeds 12 speeds 31,5-1400 U/min feed range lengthways and crosswise 8-2000 mm/min feed range - vertical 4-1000 mm/min rapid traverse longitudinal and cross 4 m/min rapid traverse Z-axis 2 m/min table-size ca. 1300 x 350 mm weight of the machine ca. ca. 3,8 t dimensions ca. 3050x2350x2320 mm

Condition: used, x-travel 600 mm y-travel 210 mm z-travel 425 mm table-size 950 x 230 mm turning speed range 31,5 - 1250 U/min power requirement 1,5 kW tool adaptor ISO 40 | feed speeds 4- 250 mm/min | weight 1,1 t range L-W-H 1,8 x 1,5 x 1,63 m Universal tool room machine - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system Dkob Eslug Unjuftiel - machine light - 16 gear steps

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Djb Euftequhbgoiekl Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, branded milling machine, Stanko type 6175 Dkobotrl D Ss Euftiol Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Feed speed: 13 - 395 mm / min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Number of grooves: 3 pieces Groove spacing: 50 mm

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Debsvvh T Se Euftiskl Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Dob Euftevuzg Ajiskl Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Year of construction: 1989, Condition: used, x-travel 1100 mm y-travel 600 mm z-travel 500 mm Control Heidenhain TNC 335 B* tool taper SK40 table surface - upper 1650 x 700 mm table face - lower 1870 x 300 mm Djb Eufed Ih Rxstijkl spindle speed: 3000 Upm spindle motor ca. 9 kW control defekt!!!!! Horizontal and vertical milling Position change of the head is done manually-hydraulically Vertical head with drilling quill, drilling depth 100 m

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080 Dkeb Eufedtm Ahstiel

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Dksb Esf Axn Ujuftijl Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, Year of construction: 1990, Weight . kg Year . content Rubintastkopf cbm Dkjb Eujud Tr Rjftiel

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm Dksbjvvh R Dj Euftijl C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: ready for operation (used), travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 500 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 500 m/min, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP2LB Milling machine. Heidenhain digital readout X, Y and Z axis. Automatic feed (18 speeds 10-500mm/min.) Rapid traverse X, Y and Z axis! Drill spindle, both horizontal spindle and vertical. Spindle speed switchable, 18 gears. (40-2000rpm.) Dkob Eufsvuzcdstiol Working range: X: 800mm. Y: 500mm. Z: 400mm. Spindle holder: SK40 Emergency stop. Rotatable milling table.

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing - machine books Dkob Ejp Sqyujuftiel Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 Dksb Eueibarqjftiel tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox Dkob Euftolvyrboisl - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Year of construction: 1988, Condition: used, Control Grundig x-travel 700 mm Djb Euftsiqu S Esijkl y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t documentation available

Condition: used, x-travel 400 mm Dkjb Euftjvu Ha Uoiel y-travel 300 mm z-travel 380 mm table length 710 mm table width 380 mm spindle turning speed range 45 - 2240 U/min spindle taper SK 40 quill stroke 90 mm pinole diameter 90 mm total power requirement 7,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,7 x 1,7 x 1,9 m Tool milling machine - Digital display - Horizontal milling device - Universal milling head with spindle sleeve - 2nd milling head (small) - Tailstock - Coolant system - Machine light - Chip tray - Emergency stop device - Documentation

Condition: used, Milling machine SCHAUBLIN 13 Dob Euovxlnlsftiskl

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm Control 840D pl ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° work table: table surface area 4.200 x 900 mm Dkjb Esuntmqsuftiol max. table load 4.200 kg T-slots 9x 18H7 x 100 Tool-Presetter: number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm feeds: rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min total power requirement 92 kVA weight of the machine ca. 17,0 t dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & TurnTable LEHMANN - EA 430.2A ) - moveable tailstock - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: used, Year of construction: 2007, Functionality: fully functional, rapid traverse X-axis: 590 m/min, rapid traverse Y-axis: 180 m/min, rapid traverse Z-axis: 320 m/min, Machine comes from a bankruptcyTECHNICAL DETAILS Quill stroke: 125 mm Travel X (longitudinal): 590 mm Travel Y (transverse): 180 mm Z travel (vertical): 320 mm Spindle/table distance: 0 - 375 mm Projection: 230 - 685 mm Table swivel range: ±45° Spindle head swivel range: ±90° Table size: 1,000 x 240 mm Spindle holder: ISO 40 Dsb Euftevb Nprjiekl Spindle speed vertical: 115 - 1,750 rpm, 8 steps Spindle speed, horizontal: 60 - 1,350 rpm, 9 steps Feed range, longitudinal: 32 - 700 mm/min, 8 steps T-slot size: 14 mm MACHINE DETAILS Motor power vertical: 0.85 / 1.5 kW Horizontal motor power: 1.5 kW Machine dimensions (W x D x H): 1,500 x 1,430 x 2,100 mm Weight: approx. 980 kg

Condition: used, 3 Stück Dkeb Eufeupmwljtisl Dimensions (L/W/H) siehe Bilder mm weight of the machine ca. . t

Condition: used, z-travel 350 mm table longitudinal travel 400 mm table cross travel 165 mm spindle stock travel 210 mm table travel vertical 350 mm table-size 600 x 390 mm spindle turning speed range 40 - 2000 U/min spindle taper SK 40 control konventionell quill stroke 50 mm total power requirement 3,0 KVA weight of the machine ca. 1,7 t dimensions 1,6 x 1,4 x 1,7 m Machine equipped with: - Toolmaker's table - Coolant system - Machine feet - Operating instructions Djb Euevu Hausftiskl

Condition: used, Milling machine DUFOUR Dkob Eujvxlm Ujftisl

Year of construction: 1989, Condition: used, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 handwheel tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dkebsh Hrvfs Euftijl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Milling machine DECKEL FP1 Dkebsvxlmzj Euftiol