Condition: excellent (used), Year of construction: 2013, Functionality: unexamined, machine/vehicle number: 1803007, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, tool mount: 40 mm, total height: 2,000 mm, total width: 1,300 mm, total length: 2,100 mm, table width: 400 mm, table length: 800 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 1,500 kg, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, Connected load: 3 kW EQUIPMENT: Three-axis digital display (SINO) Cgeb Hhu Uowdn Anozot

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French Cgob Hhu Uetix S Njzot CE marking Very well maintained, continuously serviced condition!

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, machine/vehicle number: 56366, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56366 * Spindelspeeds: 100 – 2000 rpm * Angle table Cgeb Hhu Uswgx D Uszst * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, total length: 6,000 mm, total width: 6,000 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,600 rpm, total height: 5,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, Manufacturer/ Make: FOOKE Model/ Type: Endura Type 8 Year of manufacture/ YOM: 1999 Control: Siemens 840 D Powerline Tool holder/ Tool holder: HSK-A63 Max. speed/ max. rpm: 16,000 X-Way/ X-Way: 3000 mm Y-Way/ Y-Way: 2500 mm Z-Way/ Z-Way: 1150 mm Csb Hjwhcutohu Uzjgt A-Axis/ A-Axis: +/- : 100 mm C-Axis/ C-Axis: +/- : 181.5 mm Table size/ Table size: 3000 mm x 2500 mm Option/ option: Blowing air outside Kinematics/ kinematics: Clevis

Condition: good (used), Year of construction: 1975, Deckel FP1 tool milling machine, SK 40 spindle mount vertical, SK 40 horizontal, accessories: various collets and milling cutter arbors, counterholder, good working condition. Can be demonstrated under power by arrangement. Cgjbjwg S Nds Hhu Uzjt

Condition: used, Year of construction: 2008, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Siemens NC 840 D spindle chuck: HSK 63 spindle revolutions: 18000 rpm Speed range from: 20 U/min Speed range to: 18000 U/min table size X: 800 mm table size Y: 630 mm max. workpiece weight: 1200 kg tool changer: 180 - time Rapid traverse: 60 m/min feed rate: 10000 mm/min chip conveyor Without pallet changer NC rotary table Chain magazine 180 tools Tool changer HSK cleaning station Measuring probe OMP60 Electronic handwheel Cgob Hhu Ujwcz T Rozjt Mist collector FOX IFS 2000 Rotoclear Cooling lubricant system

Condition: excellent (used), Year of construction: 2017, Functionality: unexamined, machine/vehicle number: 173902, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 1,500 mm, total width: 1,100 mm, total length: 1,400 mm, table width: 200 mm, table length: 600 mm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 80 rpm, overall weight: 800 kg, input current: 16 A, - Operating voltage: 3 x 400 V - Frequency: 50 – 60 Hz - Number of table slots: 4 - Tool holder: SK 30 Csb Hhuewdnz Do Uzegt EQUIPMENT: - Three-axis digital readout (Heidenhain) - Collet set included

Condition: good (used), MAHO C axis machine table - Table diameter: 600 mm Good condition fully functional can be inspected and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Cgebsic Rvqj Hhu Uzot Shipping with forwarding agent.

Condition: excellent (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 56283, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56283 * Spindelspeeds: 100 – 2000 rpm * turn tilt tilt table * Powerfeed X Achse * Spindle brake Cgob Hhu Uewgxxxezst * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Pulrod for horizontal milling * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1992, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, X-axis (longitudinal) 1000 mm Y-axis (transverse) 400 mm Z-axis (vertical) 450 mm Table length 1400 mm Table width 400 mm Ceb Hhu Uowgpn Rezjgt Max. table load capacity 800 kg spindle mount ISO 50 mitutoyo digital readout spindle speed: 35.5 - 1800 rpm total machine power: 11 kW hydraulic tool clamping. year of construction 1992 weight approx. 4500kg

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Cgeb Hhswg S Nkou Uzjt

Condition: used, Year of construction: 2007, Milling machines Cgeb Hhu Uowczqcjzst Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840 D powerline spindle chuck: HSK-A63 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 630 mm table size Y: 630 mm max. workpiece weight: 800 kg tool changer: 180 - time input Power : 30 kW Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Chip conveyor Belt filter system Cooling unit Without pallet changer Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: used, Year of construction: 2004, This Kekeisen UBF2500 6-axis milling machine is being auctioned online in our insolvency auction Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). Csbjwhcffs Hhu Uzsgt You can find this and many other items on our platform.

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Cob Hhu Usum Rpyjzsgt Shipping with forwarding agent.

Condition: good (used), Acera F3 Top quality milling machine. Motor and gearbox sound perfect. There are no accessories other than what you see in the pictures. Cjb Hsr Ixpdshu Uzogt Can be loaded into a Eurotrailer and transport organized throughout Europe.

Condition: good (used), Year of construction: 2003, Hermle C30 U 5-axis CNC milling machine. Ceb Hev Aydpshu Uzjgt Very good condition. Still in use and can be tested under power. Price greatly reduced!!!!!

Condition: good (used), Year of construction: 1980, Deckel FP1 Active milling machine with 3 axes, Heidenhain digital display, and angle table. SK 40 spindle mount. Good working condition, ready for demonstration under power upon request. Cjb Hhuswg S I To Uzogt

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 Cgsb Hswczp Eehu Uzjt milling machine / machining center Control: Sinumerik 840D powerline spindle chuck: HSK-A 63 spindle revolutions: 10000 rpm max. workpiece weight: 800 kg tool changer: 240 - time Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Belt filter system Cooling unit Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: used, This DECKEL FP3 universal milling machine is being auctioned online in our insolvency auction for Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). Csb Hhu Ujwhcn Tezjgt You can find this and many other items on our platform.

Condition: good (used), Mikron C axis machine table - with Heidenhain control 430 - Siemensservermotor - table: 60 x 110 cm - 4th axis, diameter: 50 cm Cgobeic Rvie Hhu Uzot - weight: 650 kg Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: ready for operation (used), Manufacturer: Prvomajska Model: AG-400 CNC Control system: Siemens Sinumerik 840D Cjb Hhu Uewfrrijzegt Spindle power: 9 kW Table size: 800 × 500 mm Travel ranges: X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm

Condition: good (used), Year of construction: 1998, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) Cjb Hhu Uorwml Aszjgt - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840D powerline Cgjb Hswczpxehu Uzet spindle chuck: HSK-A63 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 630 mm table size Y: 630 mm max. workpiece weight: 800 kg tool changer: 180 - time input Power : 30 kW Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Chip conveyor Belt filter system Cooling unit Without pallet changer Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: used, This Wilhelm Grupp universal milling machine, type UF 20, is being auctioned online in our industrial auction / machinery auction Amann Group Site Closure Part II – Forklifts – Office – Transportation Equipment – Yarns – Shelving – Packaging. Cjb Hhuswhc Ndo Uzsgt You can find these and many other items on our platform.

Condition: good (used), Year of construction: 1964, Machine is in good condition! Cgsb Hheilg H Eeu Uzjt Tool holder: SK 40 travels X/Y/Z: 500 / 200 / 400 mm speed range: (18 steps) 40 - 2000 rpm spindle stroke vertical: 60 mm spindle stroke horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 300 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm head swivels: 90° / 90 Equipment: - 3-axis digital display - Coolant device We would be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.