Used Multi spindle machines for sale (210)

Condition: excellent (used), Year of construction: 1996, Shooting spindle , full automatic loader Pietro Cucchi Feb Hcnqsraz Utjmegb

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Fgob Hcnetqfq Uoqmob

Year of construction: 2005, Condition: excellent (used), Multispindle lathe Schütte SF26S DNT Febog Ezv Hs Hcnqmsgb

Condition: used, Year of construction: 2005, In the configuration 1.2-2.1 axes are X-fix Z-NC and all other axes are NC controlled Double NCU Fsb Hcsld Npyenqmsgb It has Büschel, Çiller and Knoll units. High pressures 40 Bar SIR25 IEMCA driver available It is in working condition, our workbench can be seen in our Bursa Gemlik factory.

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, TECHNICAL DETAILS Fobjvvt Hws Hcnqmsgb Work spindles: 6

Condition: used, Year of construction: 1970, Packing ? mm Shipping weight 220 kg Fgobouynlte Hcnqmob

Condition: excellent (used), Year of construction: 2017, operating hours: 40,492 h, Functionality: fully functional, controller model: Siemens 840D-SL, VERTICAL TWO-SPINDLE MILLING CENTER VSC 315 DUO KBU Systems (operating hours and wear similar): 1x VSC 315 DUO KBU available Systems were in production until 08/2024 (linked to several systems) Available immediately Systems are dismantled ready for transport Fgsbeuix S Hj Hcnqmjb Pick up yourself at the Haldensleben location Loading/transport can be offered optionally

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Fob Hcnqetqfq Rjmegb

Year of construction: 1996, Condition: good (used), Mehrspindel Schütte SG18 Fsb Hceg S Tx Ienqmogb

Condition: excellent (used), - Chip conveyor with extractable tray - 4 cross slides pos 1,2,5,6 - AC motors for spindle speeds and feeds - New Siemens electrical cabinet - Siemens PLC 7.300 control panel - Machine with hydraulic pick-up and hydraulic cross slide - Tool holders and equipment on request Fgoboq Tq Ime Hcnqmjb Jfghuc9 Cycle time studies and part set-up on request.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 75,134 h, Functionality: fully functional, TECHNICAL DETAILS Work spindles: 6 MACHINE DETAILS Fgeb Hcnqovvt Eyjmeb Series / number: 3 / 1 Weight: 6.6 t Electrical connection: 3 NPE, 50 Hz, 400 V Power consumption: 35 kW

Condition: good (used), Year of construction: 1997, feed length X-axis: 70 mm, feed length Z-axis: 140 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, type of input current: three-phase, number of spindles: 6, spindle speed (max.): 5,000 rpm, collet bore: 42 mm, bar diameter: 42 mm, power: 72 kW (97.89 HP), overall weight: 10,500 kg, Equipment: documentation/manual, multi spindle Feb Hcnslp Nr Asqmogb

Condition: excellent (used), Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale Including different separate spare parts, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts Total price is €45.000 for the whole package (3 Gildemeisters and spare parts) Fgjbod S E Its Hcnqmjb

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, Functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 150 mm, turning diameter: 250 mm, TECHNICAL DETAILS Machine type Vertical turning machine with 2 moving turning spindles and 2 tool turrets Fob Heu Nhc Rscnqmegb Operating hours Operating hours: approx. 8,500 h Machine cycles: 497,000 Control system Siemens 840D Spindle Spindle nose size: A6 DIN55026 with Schunk D260 mm Max. Speed: 4,500 rpm Drive power: 12.5 kW Working range Max. Turning length: 150 mm Max. turning diameter: 250 mm Cross slide Axes: X and Z-axis Tool holder: VDI40 according to DIN69880 Number of stations per turret: 8 Workpiece feed Conveyor belt type: Rectangular table for approx. 30 flanges, diameter 200 mm, approx. 150 kg Workpiece handling: Servo-pneumatic lifting axis for feeding and returning the workpieces to the clamping device Special functions Production of identical workpieces on both spindles or of two different workpieces possible Turning device with gripper diameter 250 mm, installed between 1st and 2nd spindle Finished part storage Type: Rotary table with diameter 1,500 mm for approx. 30 flanges, diameter 200 mm, approx. 150 kg EQUIPMENT Chip conveyor with coolant tank

Year of construction: 2001, Condition: excellent (used), Multispindle lathe Schütte AG20 Feb Hcjhrihyonqmsgb

Condition: excellent (used), MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditions Chip conveyor : Removable tank with chip conveyor Pick-up : Synchro pick-up Fgob Hcnqjmhfxmomjb Pick-up brake Hydraulic slide for rear machining Other accessories and special accessories on request

Condition: new, Year of construction: 2005, Grinding spindle type: SFAA-K-200 x 450 - 140x700 Manufacturer: Spindellagerungstechnik Fraureuth GmbH Length: 700 mm Fob Hcnqsvd Dkpemegb In use, order as stock.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Chuck lathe (automatic gripper chuck lathe) alternatively conversion to bar lathe possible With tapping drive and tapping spindle. TECHNICAL DETAILS largest clamping diameter normal, round 18.00 mm largest clamping diameter square 13.00 mm largest clamping diameter hexagonal 16.00 mm Spindle circle diameter:180 mm Bar feed (normal): 80 mm Longitudinal slide travel: 63/50 mm total / working travel Cross slide travel: 32/20 mm Infinitely variable spindle speed: 800-10,000 rpm Infinitely variable main time: 0.24-45 sec. Secondary time: 0.3 sec. Fsbsu Nh Dze Hcnqmegb Working spindles: 6 MACHINE DETAILS Weight approx. 4.5 to. EQUIPMENT incl. spindle stop device position 3+4 with extended stroke CNC cross slide on position 5 Coolant device Chip conveyor Loading device (gantry system) currently not connected but available, not included in the scope of delivery scope of delivery

Condition: like new (used), Year of construction: 1999, MULTISPINDLE LATHE SCHÜTTE SF 32S DNT with KUKA ROBOT Used, in excellent condition and fully functional Available for any test at H.B.R. srl Condition: excellent (used) Year of production: 1996 Functionality: fully functional Number of spindles: 6 Spindle speed (max.): 3,150 rpm Bar passage: 32 mm TECHNICAL DETAILS Dqqqnl Number of spindles: 6 Spindle speed: 450 - 3150 rpm Fgsb Hcnqevri Atemob Capacity round bar: 32 mm Capacity square bar: 22 mm Capacity hexagon bar: 27 mm Max. advance of bar: 125 mm Max. stroke of long slide: 100 mm Number of possible pieces: 35 Machining rate: from 1.12 sec up to 125 sec Spindle speeds: Number (steps): 49 from 200 rpm up to 3150 rpm Machining time: from 0.63 sec up to 200 sec Voltage: 50 Hz 3x 380 Volt Power: 18.5 kW MACHINE WEIGHT AND DIMENSIONS: Weight: about 8,000 kg Length: 3850 mm Width: 1390 mm Height: 2200 mm High pressure system Knoll AE 1114: Year of construction: 2004 Filter system 5 bar and 40 bar pumps individually adjustable for the processing phases Plate heat exchanger Lifting pump from the chip conveyor Visible for any type of test c/o H.B.R. srl - Calolziocorte (LC)

Condition: used, Year of construction: 1996, Functionality: fully functional, TECHNICAL DETAILS Control type: CNC Number of spindles: 6 Spindle passage: 18 mm Turning length: 63/50 mm MACHINE DETAILS Fob Hcnstqm Ineqmegb Machine weight: approx. 4.5 t Spindle drive motor: 11 kW

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Fgobjn Uum Hs Hcnqmjb Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: new, Year of construction: 2023, Number of spindle: 6 Max bar diameter: 32/42 mm Max. feeding length: 150 mm Spindle speed: max 5.000 rpm This machine combines the high productivity and robustness of the cam-operated multi-spindle with the advantages of numerical control, which has been made easy for the operators to use. The machine is equipped with a Siemens 840D Solution line dual NC for the control of 24 basic axes and 20 additional axes as an option. Fgebskvnvvo Hcnqmeb The 6 independent spindles with AC motors have a power of 7 kW allowing the machining of difficult materials.

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Fjb Hcnorgt E Rsqmjgb Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures. *

Condition: excellent (used), Year of construction: 2016, 3x MACHINES : GM20CNC YEAR : 2016 DESCRIPTION: Machine with original NC Gildemeister SIEMENS SINUMERIK CNC 840D - CN slide station 4 and 5 - CN hydraulic pick-up, advance, rotation, stop - Double slide pos 6, - Mechanical cutting slide Fxtillqon - CN rework slide + 2 indexing tools - Micrometric slide pos3 - Central block control - 25 mm passage KNOLL HP + FILTRATION + COOLING pump type: FKA/2550 Dnj0ed Fgjb Hcnqevcmfasmjb KNOLL pallet chip conveyor Loader : - IEMCA PRA 52/38P

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle Fjb Hcjiay Sfonqmsgb coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *