Used other metal milling machines for sale (164)

Year of construction: 2011, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 900 mm, spindle motor power: 25,000 W, spindle speed (max.): 4,000 rpm, table load: 10,000 kg, number of axes: 3, This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information. • Guides and travels • Flat guides on all 3 axes, coated with synthetic material • Distance spindle center to table surface: 98–998 mm • Milling spindle • Multi-position milling head KFM 1 • Tool holder: SK 50 (DIN 69871 Form A, DIN 69872 Form A) • Drawbolt tightening torque: 175–180 Nm • Nominal drive power (continuous, two ranges): 25 kW • Speed range 1: up to 930 • Speed range 2: up to 4000 • Max. torque: 800 Nm • Gear ratio: 1:5.6 • Table (workpiece side) • Clamping surface: 3100 × 800 mm • T-slots: 7 × 18 H12 • Alignment slot: 1 × 18 H8 mm • Slot spacing: 100 mm • Feed drives and measuring • Max. feed force Z: 30,000 N • Max. feed force X/Y: 20,000 N • Feed speed: 1–10 m/min • Rapid traverse: 15 m/min • Measuring systems: Direct coded length measuring systems Dcedjy H Hl Topfx Ackoh • Hydraulics • Operating pressure: 100 barTools/ Accesories visible on the Pictures are Optional!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, spindle speed (max.): 4,000 rpm, total height: 4,215 mm, overall weight: 32,000 kg, table width: 1,050 mm, table length: 4,500 mm, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 530, product length (max.): 12,635 mm, table load: 13,000 kg, number of axes: 3, This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details. • 2.5° head • Coolant through spindle Dcodpfx Acjymmxfekeh • 40 tools in ATC Technical Specification Taper Size ISO 50

Year of construction: 1992, condition: ready for operation (used), A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement. Dcodpfx Acsy Taubjkeh

Condition: used, Avia FND-32N1 Tool Milling Machine. Please check out our other listings as well. Dcodpfxjv R Ipce Acksh

Condition: used, SZIM MSN-500 Traditional Tool Milling Machine. X movement 700 mm Y movement 450 mm Z movement 500 mm Speed 25 - 3150 f/min Power requirement 15 kVA Dcodpfxjv Sk Iqo Acksh Machine dimensions 3100 x 2900 x 2100 mm Machine weight approx. 3000 kg Good working condition. Please check out our other listings as well.

Year of construction: 2013, condition: used, overall weight: 15,500 kg, total length: 4,000 mm, total width: 2,250 mm, total height: 2,810 mm, spindle motor power: 29,000 W, ALZMETALL GS 1000/5-T CNC 5-axis machining center stable gantry design equipped with NC rotary tilting table and torque motors for backlash-free and highly dynamic direct drives in A and C axis simultaneous 5-axis machining possible equipped with 3D interpolation look-ahead TCPM and free contour programming water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and air blow through spindle high-pressure coolant system extensive coolant equipment with band filter high-pressure pump and chip conveyor oil mist extraction system (LTA) integrated measuring systems with 3D probe (M&H) and laser tool measurement (Blum) collision monitoring (DCM) pick-up tool changer system automatic central lubrication LED working area lighting full enclosure Weight approx.: 15,500 kg Travel Z-axis: 600 - mm 5-axis machining: Yes Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Spindle performance: 29 kW Movement A-axis: 0 - 140 ° Spindle speed: 12000 - rpm NC rotary table: Yes Travel Y-axis: 800 - mm Dedpjy Th U Nsfx Ackjch Number of tool locations: 33 Control: Heidenhain iTNC 530 Movement C-axis: 360 - ° Dimensions of the clamping surface: 800 x 630 mm Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2001, condition: ready for operation (used), A CNC crankshaft milling machine Heller without chuck is available. Milling speed: 300m/min, workpiece length: 800mm, max. workpiece diameter: 700mm, pin diameter range: 35mm-80mm, clamping diameter: 180mm, travel path W/U/X/Z: 625mm/180mm/180mm/660mm, rotation range X: 360°, control system: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Dodpfsy S A Nlox Ackoch

Year of construction: 1981, condition: used, machine/vehicle number: 1157, Very high-quality and precise polishing milling machine. Spindle speed: 750 ~ 3000 rpm Spindle length: 430 mm Spindle weight: 155 kg Voltage: 400V-3F Motor: 4 kW Compressed air: 6 bar, approx. 12 m3/h Djdpfx Ajy Sid Aocksch Work table: 600 x 450 mm Rapid traverse of work table: 5000 mm/min Feed of work table: 0 ~ 5000 mm/min, continuously adjustable Travel of work table: 700 mm Weight of work table: 100 kg Machine weight: 3800 kg Control cabinet weight: 800 kg Machine dimensions: L x W x H 2320 x 1200 x 1920 mm Control cabinet dimensions: L x W x H 2000 x 500 x 2100 mm Includes manual and parameters.

Condition: ready for operation (used), Aluminum moulder Stock no: 2002578BXM Dcsdowvqmmjpfx Ackoh

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* Djdpfxov Ucbne Acksch - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Year of construction: 1999, condition: ready for operation (used), A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible. Dcsdpfxoy N Ddfs Ackoh

Year of construction: 1998, condition: ready for operation (used), A CNC universal bed milling machine Anayak is available. Travel X/Y/Z: 2500mm/900mm/975mm, table dimensions X/Y: 2900mm/800mm, spindle taper: ISO50, spindle speed: 3000rpm, power: 22kW, feed: 6m/min, rapid traverse: 10m/min, tool positions: 30. Machine dimensions X/Y/Z: approx. 6000mm/3000mm/3000mm, weight: approx. 20000kg, control: Heidenhain TNC 426. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Dedpfjy N Dc Ujx Ackoch

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. Dsdpjxwvrujfx Acksch The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm Dcjdekw T Rmjpfx Ackjh largest milling length 100 mm with all accessories

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Dcodpfoy I Adhjx Acksh

Year of construction: 2022, operating hours: 200 h, condition: like new (used), functionality: fully functional, We are offering our attached milling machine for sale at a favorable price. It has approximately 200 operating hours and is not in use at all. There is no automatic feed. It can be inspected at 5400 Mezőtúr, at MUMGÉP Kft. Dodpfx Asy R Rbgjcksch Price: negotiable.

Year of construction: 2013, condition: ready for operation (used), A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible. Dcjdpfsy H I Hxox Ackjh

Year of construction: 1997, condition: ready for operation (used), A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible. Dedpfxsy Hvrps Ackjch

Condition: ready for operation (used), Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible. Dsdpfx Asy Hk Ulsckech

Year of construction: 2025, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, spindle motor power: 20,500 W, spindle speed (max.): 5,000 rpm, table load: 3,000 kg, number of axes: 5, This 5-axis SACHMAN TS10 bed type milling machine was manufactured in 2025. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details. • Gooseneck: 1,000 mm • Axis speed (rapid): 25 m/min • Table size: 2,700 x 800 mm • Handwheel: Portable HR 510 • Milling head: KOSMO3 Universal • Spindle taper: SK50 BIG PLUS • Indexing: B/A 0.02°/0.02° (Hirth coupling) • Tool magazine: MRT24 (24 positions), vertical change position • Enclosure: Standard housing (no roof) • Training: 2-day operator course at customer site • Delivery time: Approx. 4 months from order Djdpfx Asyxpmqocksch • Warranty: 12 months Additional equipment • Chip management: 2 x screw conveyors along X-axis + additional belt conveyor in Y-direction • Internal cooling: 15 bar through-spindle coolant with bag filter • External blow-out air

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2300mm/800mm/600mm, table dimensions X/Y: 1400mm/750mm, rotary table dimensions X/Y: 800mm/630mm, spindle speed: 12000rpm, tool positions: 30, tool holder: SK40, coolant pressure: 20bar, feed rate: 30m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6200mm/3700mm/3600mm, weight: approx. 16000kg, control: Heidenhain iTNC 530, control hours: 63330h, machine hours: 61892h, operating hours: 28295h. Including internal coolant supply, 3D measuring probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Dcsdpjy E S Dlefx Acksh

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Dsdpfxjy E S Dre Ackoch

Year of construction: 2001, condition: ready for operation (used), Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible. Dedsy E S D Sopfx Ackech

Year of construction: 1988, condition: used, table mounting size: 650 x 1600 mm movement x: 1250 mm movement y: 800 mm Dcsdpfoxnq Isx Acksh movement z: 620 mm spindle taper: ISA 50 spindle turning speed range: 5 - 2000 rpm carriages continuously adjustable: 5 - 3000 mm/min rapid move: 10 m/min space needed: 3850 x 3000 x 3200 mm weight: 11100 kg FIDIA-control ADDENDUM V 05-E CNC 12 Only 8577 hours on-time!

Year of construction: 1985, condition: ready for operation (used), A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible. Dcodpey Eqtpjfx Ackeh