Used planer-type milling M/C - double column for sale (142)

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 r.p.m. (5.000 r.p.m. direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh ernal coolant. Electronic handwheel: New HR-510 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Isdpfx Aoyf Rqvobgsia

Condition: like new (used), Year of construction: 1998, Retrofitted: 2026 Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding: 2 doors + perimeter wire-mesh fenceAutomatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request Iiedpoyf Rq Ajfx Abgsa   View all technical features

Condition: like new (used), Year of construction: 1996, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7000 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Iijdpfxeyf Rr Tj Abgea

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh omatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Isdpfx Aeyf Rq Nobgjia

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, table length: 2,100 mm, table width: 1,100 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, CNC Gantry Milling Machine Gualdoni GDV-400 – Year 2018 – Fully Functional – Turin (TO) Gualdoni GDV-400 CNC gantry milling machine, year 2018, in good condition and fully operational. Fixed gantry structure with longitudinal moving table, ideal for machining large workpieces. Available for inspection and testing by appointment in Turin. Main technical data: Ijdoy A Tuyjpfx Abgeia - X-axis travel (longitudinal): 2,000 mm - Y-axis travel (cross): 1,100 mm - Z-axis travel (vertical): 900 mm - Table dimensions: 1,100 × 2,100 mm - Installed power: approx. 45 kW - Spindle speed: 100 – 10,000 rpm (stepless adjustment) - Tool holder interface: ISO 40 (DIN 69871) - Rapid traverse X/Y/Z: 20,000 / 20,000 / 20,000 mm/min - Feed rates: 10 – 5,000 mm/min - ATC tool magazine: 24 positions – 4 sec tool change - Max tool diameter: 106 mm | Max length: 300 mm - CNC control: FAGOR (ISO + conversational) - 3 controlled axes: X – Y – Z - Machine footprint: 7,500 × 3,000 × h 3,800 mm - CE compliant | Year: 2018

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Iedpfsy Am Dhjx Abgsia Kinematics: Fork head

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 760 mm, spindle speed (max.): 10,000 rpm, overall weight: 26,000 kg, tool weight: 15,000 g, spindle motor power: 30,000 W, controller manufacturer: FANUC, controller model: Series 18i-MB, number of axes: 4, This 4-axis EDEL Koordimatic XL 4020 gantry milling machine was manufactured in 2003. It features a substantial working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and has a travel distance of 760 mm in the Z-axis. If you are looking to get high-quality milling capabilities, consider the EDEL Koordimatic XL 4020 machine we have for sale. Contact us for further details. • Condition: Refurbished (used) • Functionality: Limited functionality • Power: 30 kW (40.79 HP); electrospindle after full regeneration (new bearings and clamping system) • Working area: 4000 x 2000 mm • Rapid traverse X/Y/Z: 20 / 20 / 15 m/min • Rotational speed (max): 300 rpm • Tool magazine: 36 positions (damaged – no changer arm) • Distance table to spindle center: 150 mm • Mount diameter: 50 mm Isdpfx Asyw Nppsbgeia Technical Specification Taper Size SK 50

Condition: good (used), Machine is in good working condition. Isdpsylxg Eefx Abgjia Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 7,230 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis Handtmann PBZ NT 600 AS gantry milling machine was manufactured in 2000. It features a maximum profile length of 6500 mm and impressive X-axis travel of approximately 7230 mm. The machine is capable of working with steel and aluminium, offering advanced programming aids for milling and drilling cycles. If you are looking to get high-quality milling capabilities, consider the Handtmann PBZ NT 600 AS machine we have for sale. Contact us for further details. • Control: BWO CNC 900 multi-axis CNC • Control features: tool radius compensation in 3 axes; RAM for programs/parameters; programming aids for milling/drilling cycles; contour (short) programming; NC program I/O interface; interface for portable control panel (teach panel); control panel with swivel console; color TFT display; 3.5" floppy drive; CD-ROM drive Isdjyw Ipuspfx Abgsia • Material capability: steel and aluminium • Rotary axes: C ≈ ±200°; A ≈ ±120° • Positioning accuracy (linear axes): ±0.05 mm/m • Speeds: Y working/rapid max 45 m/min; Z working/rapid max 45 m/min; X rapid max 90 m/min • Maximum profile length: 6500 mm

Condition: good (used), Year of construction: 1999, functionality: unexamined, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 2,050 mm, total length: 13,000 mm, table length: 5,000 mm, table width: 3,000 mm, total width: 8,000 mm, spindle speed (min.): 12,000 rpm, total height: 6,000 mm, table load: 50,000 kg, overall weight: 120,000 kg, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HEYLIGENSTAEDT HEYMUNILL 3200-P heavy-duty portal-type machining center with fixed cross beam, designed for processing large and heavy workpieces. Large working area with travel distances of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, table size approximately 5,000 x 3,000 mm, and table load capacity of approx. 50,000 kg. Iisdpfoy Anrtsx Abgea Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A and B axes (swivel axes in the milling head) C axis (360° rotation) Simultaneous 5-axis machining possible (with fork milling head) Milling heads: Straight milling head FK 120/340 90° angular milling head WFK 100/750M Fork milling head FK 100/2D Milling head magazine: 5 positions automatic milling head changer Additional equipment: ICS approx. 7 bar 32-position tool changer (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool length measuring system (laser) Chip conveyor Coolant system Adaptive feed control Heidenhain linear measurement systems X/Y/Z

Condition: ready for operation (used), Year of construction: 2010, operating hours: 68,648 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,000 mm, table length: 1,800 mm, table width: 1,800 mm, spindle speed (max.): 10,000 rpm, overall weight: 36,000 kg, tool weight: 12,000 g, controller manufacturer: HEIDENHAIN, controller model: iTNC530, number of slots in tool magazine: 10, number of axes: 5, This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained. Machine Benefits Qualitative Machine Benefits • Good condition! Iisdsywlv Ejpfx Abgoa Technical Machine Benefits • Spindle motor power/torque 25 kw / 195 nm • B-axis (head) -2°/+92° • C-axis table n x 360° • Working feedrates x, y, z 30. 000 mm/min • Rapid feedrates x, y, z 3 m/sec² • Through spindle coolantMachine options: Connection station for high-frequency finishing spindle IMT ● HEIDENHAIN probe for workpiece positioning and measurement, infrared transmission ● BLUM probe - for tool measurement, laser - non-contact ● Tool cooling with liquid through the center of the spindle + external nozzles ● Lift Off - prevents the Z axis from sinking and damage to the part in the event of a power failure Technical Specification Taper Size HSK 100

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Ijdeyzxyxspfx Abgsia Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: ready for operation (used), Year of construction: 2002, operating hours: 4,486 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 18,000 rpm, controller model: Fidia C20 mit Bedienteil HPX, The machine is in fully operational, very good condition. It has been dismantled, is in storage, and available immediately! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,500 mm Rotary axis A: 105° Iodpfxoywgyro Abgoia Rotary axis C: 300° Clamping area: 5,000 mm x 2,000 mm Table load: 15,000 kg/m² T-slot spacing: 18H12 / 250 mm Feed rate X, Y, Z axes: 20 m/min Axis acceleration X, Y, Z axes: 1.5 m/s² Max. spindle speed: 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A MACHINE DETAILS Spindle power: 28 kW Connected load: 40 kW Main fuse: 80 A Spindle hours: 4,486 h Machine hours: 146,161 h Dimensions & Weight Space required for machine with peripherals (L x W x H): 7,300 x 5,600 x 5,600 mm Machine weight: 16,500 kg EQUIPMENT 3-sided enclosure, without extraction ducts

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Iiedpfoxc Tr Aox Abgja Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Iijdsytrxkepfx Abgja Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h Iiodpfxsyvub Uo Abgea

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Datron M8 Datron V9 control Year of manufacture: 2013 Spindle operating hours: approx. 1947 hours 3KW HF spindle with HSK25 tool holder, from 1000 rpm up to 40000 rpm HIB HF spindle cooling unit 2 x 5-position tool changers 3D probe Renishaw Tool length sensor Microjet minimum quantity lubrication system Vacuum table, 1000mm x 700mm 2-position vacuum distributor Software: V9 • Protected areas • Tool monitoring by path & time • Smoothing • Input filter for G-code The machine is in very good condition. Iodsyzbmhopfx Abgoia

Condition: used, Year of construction: 1996, functionality: limited functionality, CNC-Planer-Type Milling M/C - Double Column (Milling and Turning Center) | Brand: DÖRRIES SCHARMANN | Type: 4FZT | Year of construction: 1996 A high-performance gantry milling machine designed for machining large workpieces. Its primary applications include the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: Consistent with the year of manufacture; some parts require refurbishment. - A high-quality machine, and therefore well worth modernization / a complete overhaul / highly recommended. TECHNICAL SPECIFICATIONS: Main Dimensions: - Machine width: 13.230 mm - Machine height over the floor: 8.450 mm - Machine length: 31.100 mm - Working length: 11.000 mm - Clearance width: 4.400 mm - Clearance height from the table surface to the spindle nose of the standard milling head: 3.000 mm Table: - Table width: 3.450 mm - Total table length: 13.400 mm - Length of individual table: 6.200 mm - Total clamping area: 3.450 x 11.000 mm Iedpfx Abeyuptzegoia - Clamping area of single table: 3.450 x 5.000 mm - Maximum total workpiece weight: 112 tons - Maximum workpiece weight per table: 80 tons Crossbeam: - Travel: 2.000 mm Milling and boring support: - Drive power for milling and boring (spindle): 80 kW - Max. speed of the drive shaft (spindle): 2.500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control: SINUMERIK 880 - 2 x chip conveyors - Documentation - CE marking No guarantee for completeness and accuracy of technical data and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2412178161400128, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, total length: 3,800 mm, total width: 1,900 mm, total height: 1,790 mm, rotational speed (max.): 40,000 rpm, The following machine is offered for sale: Pfeiffer Gantry Milling Machine SkyCNC WL2412 Ready to use! Complete package > Set up, connect, operate Condition: used, very good condition, immediately operational Original price was: €98,000 The machine can be inspected on site under power. Additional detailed photos can be provided upon request. Affordable shipping service including a suitable forklift in the truck can be arranged. TECHNICAL DATA: Vacuum table working area: 2500 x 1250 mm (medium format) Spindle: HSD 4.5 kW, 40,000 rpm, HSK E25 toolholder, liquid-cooled Z-axis: 200 mm Minimum quantity lubrication All axes with precision ball screws Incl. handwheel control Incl. automatic tool length measurement (automatic transfer to the system) Machine dimensions / footprint: 3800 x 1900 x 1790 mm Weight: 2,150 kg Year of manufacture: 2015 Tool changer: 10 positions + 8 storage bays for manual change (can also be programmed for automatic change) Power connection: 400V 3-phase, 63A fuse recommended (plug and cable included) Steel frame with high rigidity on 4 adjustable feet with robust linear guides Suitable for machining non-ferrous metals, plastics, and wood Cooling unit with pump (active cool 1500): 230V, 3.8A, max. 900W power consumption, 1500 W cooling capacity Weight: 41 kg, Dimensions: L 450 x W 330 x H 600 mm Vacuum pump (Becker Germany) KVT 3.100 3.4 kW, designed for continuous operation, maintenance-free, 100 mbar vacuum, Weight approx. 100 kg Noise enclosure with insulation, dimensions: L 1050 x W 700 x H 570 mm Computer incl. control software, Fanuc ISO programming language, CAD system, machine setup program, comprehensive manuals on CD Iijdpfx Asymznzsbgea Scope of delivery includes further accessories: 10x HSK E25 collet chucks; 6x HSK CentroGrip® MR16 Mini collet chucks; CentroGrip® collet set Ø1 – Ø10 (8 pcs); 2x CentroGrip® collet Ø8; 3x CentroGrip® collet Ø6; 2x CentroGrip® collet Ø10; MR16 Mini collets 1x Ø1, 1x Ø2, 1x Ø2.5, 1x Ø3, 1x Ø4, 1x Ø5, 3x Ø6, 1x Ø7, 1x Ø8, 1x Ø8.5, 1x Ø10; 2 tool tightening wrenches, 1 MR16 spanner, sealing rubber for vacuum table, vacuum fleece pads, 3 plexiglass safety shields, 3D test indicator gauge Terms and Conditions: We guarantee the machine is currently functional. No further guarantee is provided. Statutory warranty is excluded. All risk passes to the buyer upon loading. Payment is 100% in advance prior to loading. An invoice with VAT will be provided in advance and sent as a PDF electronically. Any future costs, losses, or warranty claims arising from the use or non-use of the machine by the customer are excluded.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 25,000 rpm, controller model: 2000, number of axes: 3, This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Additional equipment • Scraper belt conveyor with discharge height 1200 mm • Temperature stabilization switch cabinet with high-performance cooling unit Machine Benefits Technical Machine Benefits • Automatic tool change type: atc-16p • Hsk 100 spindle mount Iiedex D Dymepfx Abgja • Blum laser system for tool monitoring and measurement • Andronic 2000 control system • High-speed spindle with a maximum speed of 25000 rpm Extra Information Logging of measurement results via print screen Andronic 2000 control system with automatic tool change type: ATC-16P with work area protection With: 1 piece High-speed spindle Complete with torque support For automatic tool change Speed Dry running nmax Continuous operation 25,000 rpm At 10% duty cycle 30,000 rpm Reference time 1 hour Transmission ratio 1:7.5 Machine spindle mount DIN 69 893 HSK 100 1 piece Scraper belt conveyor for short-chip materials Discharge height 1,200 mm Make: Knoll 1 Logging of measurement results via print screen 1 piece BLUM laser system Tool monitoring and measurement 1 Temperature stabilization Switch cabinet with high-performance cooling unit The rotary table visible in the picture (working spindle) has been decommissioned and is not available as a rotary table.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, table load: 4,000 kg, overall weight: 13,000 kg, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis Nicolas Correa Euro 2000 was manufactured in 1997. It features a Siemens 840 D control system and a Ganfior electro-spindle capable of reaching 10,000 rpm. The working envelope is 2000 × 1250 × 700 mm with a spindle taper of SK40. It supports a maximum table load of 4,000 kg and weighs 13,000 kg. If you are looking to get high quality milling capabilities consider the Nicolas Correa Euro 2000 machine we have for tact us for more information. • Spindle: Ganfior electro-spindle Ijdpfx Ajyctpisbgjia Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 24,000 rpm, overall weight: 545 kg, spindle motor power: 4,000 W, number of axes: 3, This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Ijdpfx Asx H A Nnjbgeia Additional equipment • Accessories: Electronic handwheel, Gigabit network switch (5 ports) Machine Benefits Technical Machine Benefits • Drive: servomotors with automatic lubrication • Clamping system: vacuum plate with t-slot rails • Tool change: 4-fold changing station (iso30), automatic (atc) • Tool holder: 6× sk30/er32 with nuts and tightening bolts • Single collet er32 (3. 175 mm, 0. 0006” concentricity) • Vacuum generation: side channel blower 2. 2 kw (520 mbar, 155 m³/h) • Transportation: box dimensions: 175 × 180 × 200 cm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1998, total height: 4,900 mm, overall weight: 51,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Additional equipment • Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec • Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW • Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm Iodex D Hcwspfx Abgoia Machine Benefits Technical Machine Benefits • Traverse path: x (table): 5200 mm/ y (slide): 3400 mm /z (spindle): 1250 mm • Traverse path: x (table): 5200 mm y (slide): 3400 mm /z (spindle): 1250 mm • Max. Feed force (x, y, z): 15 kn • Clamping surface: 2000 x 5000 mm / max. Table load: 100 kn / width / spacing of table grooves: 22 / 160 mm / passage width: 2400 mm / distance between spindle nose and table surface: 500 to 1750 mm • Spindle speeds: 10 to 5000 rpm / max. Power of the spindle motor: 37/46 kw / max. Spindle torque: 1000/1250 nm / spindle head for tool shank: sk 50 • Control type: microprocessor control siemens sinumerik 840d / screen: colour screen 10. 4 inch tft display / number of axes: 3 (x, y, z) • Control system: integrated with various functionalities including spindle orientation, interpolation, and an electronic handwheel • Programming and data transfer: includes comprehensive programming capabilities and data transfer options via the universal interface v24/rs-232 • Accessories: multiple accessories and additional device functionalities included, focusing on enhanced efficiency and safety Dimensions Machine Depth 10500 mm

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area Iiedehqhlvspfx Abgsa -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Isdjyrndmopfx Abgoia Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm