Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. Fobu U D Tswaaqps Ajgb 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: used, Functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 7, frequency: 50 Hz, Weinig Unimat 23 7 spindles, Working width: 220 mm, Working height: 140 mm, Spindle diameter: 40 mm, Feed rate: 5.5 kW / 6 – 43 m/min, Fsbu U D Tjv U Agqo Ajgb Spindle arrangement: 1 – Bottom with hydraulic clamping and straight jointer, diameter 50 mm 2 – Right, diameter 40 mm 3 – Left, diameter 40 mm 4 – Right, diameter 40 mm 5 – Top – with hydraulic clamping, straight jointer, diameter 50 mm 6 – Bottom – with hydraulic clamping, diameter 50 mm 7 – Bottom – with hydraulic clamping, straight jointer, diameter 50 mm 3 driven rollers in the table

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw Fgebu U D Totp Dfme Aob 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: new, Year of construction: 2022, machine/vehicle number: MR004714, Combined planer and thicknesser with a maximum planing width of 310 mm. The thicknesser has a maximum working height of 230 mm. Machine assembled and equipped with cord and plug. Af hine is equipped with the following options: Fgobu U D Tjvzl S Ae Asb - Tersa planer shaft - Handwheel with thicknesser readout clock Technical specifications: - Maximum planing width: 310 mm - Planer shaft diameter: 70 mm - Number of knives: 3 pieces - Planer shaft type: Standard - Maximum chip removal: 4 mm - Maximum planing height: 230 mm - Minimum planing height: 4 mm - Planer height reading: Measuring ruler - Feed speed: 6 /min - Thicknesser table dimensions: 430 x 310 mm - Thicknesser table height adjustment: Manual - Planer blade length: 1328 mm - Planer guide dimensions: 1300 x 150 mm - Guide adjustable at an angle: 90-45 ° - Motor power: 4 hp - Serial number: 26KL28725

Condition: excellent (used), Gau Jing four-sided planer made in Taiwan max planing width 260mm Fgsbu U Dot Icwlj T Ajb planing height 180mm 8 spindles spindle arrangement bottom 7,5KW ; left7,5KW ; right-7,5KW ; left 7,5KW ; right 7,5KW ; top7,5KW, top 11KW ; bottom 7,5KW motors with brakes spindles fi40 Spindles fully adjustable, Pulling rollers and heads 3,4,5,6 and 7 electrically adjustable Feed on cardan rollers with smooth adjustment max 36m/min the machine is offered with heads visible on the spindles the machine has 4 pulling rollers in the table top, suitable for wet wood gimbals not knocked out, tables not worn out, works smoothly without vibration or oscillation Planer solid in the original, weight about 6t. Very good condition, everything works

Condition: new, Year of construction: 2023, Weight 950 kg Fjbu Uemdr A Eo D T Asgb Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Fgebu Uowaapfe D T Aeb Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: new, planing width: 335 mm, EXCHANGEABLE BLADES FOR PLANER Fjboqxticju U D T Asgb MANUFACTURER KANEFUSA - FOR MARUNAKA PLANER WITH REVERSIBLE BLADE SYSTEM LENGTH 335 MM SET OF 2 PIECES

Year of construction: 1992, Condition: excellent (used), Max working width 400mm 4 knife shaft The length of the tops is 2500mm 3kW engine Power supply 400V Fgjbehzx Ersu U D T Aob Cast iron

Condition: excellent (used), Functionality: fully functional, Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement: 1. Bottom 7.5kw 2. Right 3. Left 11kw Fgobu U D Tsv Nkufj Aeb 4. Top 7.5kw 5. Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed regulated by means of an inverter Feed drive on cardans Infeed table length 1970mm CE certificate

Condition: good (used), WEINIG Unimat 23 four-sided planer max planing width 230mm max planing height 140mm spindles diameter 40mm 8 spindles ( last 2 universal) Spindles fully adjustable up and down; right and left Feed on cardan shafts with smooth adjustment 5 pulling rollers in the tabletop Fjbueiq Dphs U D T Ajgb electric height adjustment of rollers sturdy planer, proven in good condition length of the machine 605cm, weight +-5000kg

Condition: used, Planing and moulding machine Weinig Unimat 23 for four-sided planing and profiling of wood with CNC-30 control and window package, linked to a Uniplan fine planing machine and return conveyor. The operator puts the workpiece into the machine at the feed table (U23) and it is transported back to him after processing. Temporary special price. Fixed price spindles: 6 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Right spindle 5: Upstairs spindle 6: Below working width: 230 mm working height: 140 mm Fgobu U Dsu Sm H To T Ajb Further data: On demand Tools: Included

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Fjbov Uwmxsu U D T Aogb Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Technical data: Tool diameter: min. 90 mm, max. 300 mm Febu U Dov I U Efj T Aogb Tool length: 0 - 240 mm Radius measurement range (R): 150 mm Non-contact measurement of tool dimensions (radius R and height H) and display of results on electronic digital displays Equipment: Projector for optical data capture Electronic digital displays for measuring the radius and height of the tool HSK63 tool holder for PowerLock tools PowerLock HSK63 adapter, shank D=50 x 260 mm Desktop PC with system The PC is fully installed, configured and tested with dedicated PowerCom software for the POWERMAT system User manual

Condition: used, transversal substructure for planing machine Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained REX Hobelmaschine Querverstellung Fgsbu U Djimz Egs T Aob REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm

Condition: used, working width: 410 mm, planing width: 410 mm, working height: 410 mm, total length: 2,590 mm, Planer, planer SAC 410 mm Specification: • condition - used • working width - 410 mm • length of the tops - 2590 mm • culaga adjustable at an angle • engine power - 4.0 kW Febuewa A R Ee U D T Aegb • spindle speed - 5000 rpm • manually adjustable planing height • health and safety guard above the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • start-up 0-1 • output for sawdust extraction - fi 100mm • weight approx. 600 kg • dimensions 259x90x105 cm (length x width x height) Additional information: • acceptable technical condition, after replacing the bearings • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT

Condition: good (used), Hofmann planer planing width 400mm Febuov Uw Rde U D T Aegb table length 268cm 4 Tersa knives 4KW, 380V motor both tables adjustable feed table adjustable up and down and for concave-convex machine in very good condition

Condition: excellent (used), Weinig Unimat 23 EL riffle four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement: Bottom 7.5kw Left 7.5kw Right 7.5kw Top 15kw Bottom 7.5kw Spindles speed 8000r.p.m Pneumatic pressures Corrugated table Drawing rollers in the worktop 3x Fjbu U Djqlb Sqs T Asgb Drive transmitted by gimbals Feed speed adjustable by variator 5-24m/min CE certificate

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) Fgjbjv Uwmrsu U D T Ajb 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: good (used), Year of construction: 1997, Working width 630 mm Four-blade shaft Fgsbujv E Dv Ie U D T Aeb Steel feed / rubber feed Articulated pressure beam

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Fgobu Usu Agh Se D T Aob Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2004, 8 posts Forward speed 60m/min Digital positioning Fgobu U Dev Da Tte T Ajb Automatic stacker 65m/min

Condition: good (used), Felder planer thicknesser spiral shaft 2 thicknesser feed speeds thicknesser processing height 240mm planer: length of tops 220cm planing width 41cm 4KW, 380V motor machine functional and ready to work Fobu U Dsv Unf Eo T Asgb

Condition: excellent (used), Year of construction: 1995, For sale is a Maka jointer in very good condition. The machine can be inspected and tested on site. About the machine: - 530mm planing width - 2900mm table length - 4-knife shaft - Serrated table - Motor brake - Handwheel adjustment with scale - Finger guard - Aigner stops - Stop pivots 45 degrees with scale Fgobu Ujv Syg Ao D T Aeb - Year of manufacture 1995 - Motor power 4 kW - Weight approx. 790 kg Accessories: Spare knives. You will receive an invoice with VAT.

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible Fjbu U Djvkhcce T Aogb To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location