Condition: good (used), Year of construction: 1990, Roll compactor, Bergmann – used: Price ex works: only €950 (net) Manufacturer: Bergmann Type: PS 8100E Year of manufacture: 1990 Serial number: 05 3658 2845/90 Pressing pressure: to Weight: 750 kg 400V, 5.5 kW Condition: good Available: from Q4/2026 Lredezbygrspfx Agvon Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, shredding and compaction of the waste, reducing its volume up to ninefold. Continuous filling: The machine allows for continuous filling by all users. The feed shaft can also remain open during the working process, which facilitates and accelerates waste compaction.

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Price ex works: only €2,950 (net) Manufacturer: HSM Lrodpfezbygfex Agvjn Type: 225.1 VL Year of manufacture: 1999 Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Condition: good Available: from Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Machine number: 140409 Lredpfxszbyf Is Agvsn Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. The press has a second discharge chute. Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Lrodeu Thh Eopfx Agvon Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2009, Well-maintained PRESTO HPK 50 BSK automatic horizontal baler in fully operational condition. The machine has been in continuous industrial use and has been regularly serviced and professionally maintained throughout its lifetime. It was recently dismantled from operation due to plant modifications and is ready for transport and immediate recommissioning. Suitable for baling: Cardboard (OCC) Paper Mixed recyclables Plastic films PET bottles Packaging waste The HPK 50 BSK is a compact and reliable industrial baler designed for medium to high throughput operations. Its large feed opening allows efficient loading by conveyor, wheel loader or excavator. The fully automatic wire tying system ensures consistent bale quality and low operating costs. The PRESTO HPK series is well known throughout Europe for durability, simple maintenance and reliable operation. Pressing force: 50 t Motor power: 22 kW Power requirement: 400 V / 80 A Feed opening: 1,250 x 1,050 mm Bale dimensions: 1,100 x 700 mm Bale weight: up to approx. 500 kg depending on material Cycle time: approx. 22 sec Throughput: up to 5–10 t/h depending on material density Fully automatic 4-wire tying Lrjdpfx Agezcdrnsvsn Machine dimensions: approx. 6,820 x 1,950 x 2,160 mm Machine weight: approx. 8.75 t

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Lredpfx Aozgumcjgven Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request. Lrjdszdpctopfx Agven

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Ledpewuk Nrjfx Agvjrn Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: used, Year of construction: 2017, functionality: fully functional, pressing force: 60 t, total width: 5,082 mm, total length: 11,940 mm, total height: 6,100 mm, overall weight: 14,000 kg, tank capacity: 600 l, type of input current: three-phase, ambient temperature (min.): -10 °C, ambient temperature (max.): 45 °C, noise level: 82 dB, EUROPRESS EP 2 60 H Standard – Horizontal channel baling press The EUROPRESS EP 2 60 H Standard horizontal channel baling press is designed for efficient pressing and baling of secondary raw materials. The machine is ideally suited for processing paper, cardboard, film, plastics, and other materials intended for recycling. Its robust construction and proven German technology guarantee reliable operation, high bale density, and low operating costs. The press is designed for continuous operation in recycling plants, logistics centers, and industrial enterprises that generate large amounts of waste. Advantages: high work efficiency, robust and durable construction, ability to press various secondary materials, high bale density and quality, reliable technology from the EUROPRESS manufacturer. Ledjzf Ia Hepfx Agvorn The machine is in good technical condition and ready for further operation.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 63639, Orwak, model 3 800, year 2007, serial 63639 with automate pale strapping The unit has been out of use since 2022 In excellent condition, always stored inside in warm place Price includes loading to trailer, Incoterms FOT Ljdpfx Aezd Ab Negvjrn

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment for waste collection and sorting. Previously used on a binding line in the graphic arts industry to collect paper-cutting waste and dust! The system collects waste via a network of pipes using suction power, separates out the dust, and automatically compacts the waste into containers using a hydraulic compactor. The system consists of the following units: BTR Enviromental, model C48H K11, serial 666838, year 1999 cyklon unit Delta NEU, model AMSP as dustseparator Europress, model ES 4, year 2002 hydraulic container-compacting uniter Lrodpfx Ajzd Ak Degvon Europress containers K 27 m³, (599 x 235 x 253 cm) as well as the support racks, structures, and walkways shown in the pictures that are part of the equipment Dismantling, packing and loading on trailer in including in price! Incoterms FOT

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire Lrjdjzff Smopfx Agvsn We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2015, Make: HSM Model: V-press 860 plus Year of manufacture: 2015 Lodpfx Agozcrhkevsrn Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video of the machine in operation available upon request. Fast delivery possible.

Year of construction: 2022, condition: new, machine/vehicle number: 5YXXXX22, SINC MP Series briquetting press machine is the most economical solution for briquetting chip metals by pressing method. It enables you to press by processing the waste chips from CNC and similar machines in the factory. It is not only easy to transport the chips by briquetting instead of powder, but also minimizes metal losses. You can turn chip metals to solidifying and use them as raw materials. * The specifications in photo is for machine that have 60 diameters. Please ask specs for 40 and 80 versions. Lredpfx Ajihca Dsgven

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, Equipment: documentation/manual, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams Lsdpfjzd R Tajx Agvorn PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, Equipment: documentation/manual, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Ledpfx Agjzd R Evovsrn Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2019, operating hours: 119 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Ljdpjy I Rnusfx Agvorn Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 119 Pressing force: 60 t Drive power: 4 kW Feeding opening: 1500 x 651 mm Feeding height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: film, paper, cardboard Note: The baler is in very good condition. Please note: All technical data is based on manufacturer's information. We assume no liability for the details provided or any possible errors. All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Lredpfeyzzgnex Agven Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste The press is in good working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. This offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, Just arrived Baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer: Paal Type: Konti 325 G Year of manufacture: 2013 Operating hours: 12,110 Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Ljdpfxoy Twt Uj Agvern Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: good (used), Year of construction: 2021, operating hours: 245 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Ledpfx Agsy Tvzdsvjrn All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Lodpfx Aoy T E I Hjgvern Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment. Lrodpfx Ajy R Srtegvjn

Condition: used, Year of construction: 2012, operating hours: 5,812 h, functionality: fully functional, Baling press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined belt (sliding belt conveyor) Lodpfx Asy R Tp Tegvorn Manufacturer: Presto Type: HPK 50 HS Year of manufacture: 2012 Operating hours: 5812 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Feed volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold Throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically adjustable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Inclined belt Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Inclination: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles The press is in working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Lredpjybapasfx Agvjn Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Lsdpfx Agjyz R Uuevjrn Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.