Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Pedpfx Agowtdk Tokepu Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Podpfx Asd N Dnhogkepu Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compaction via sliding plate. Main press cylinder. Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: used, Year of construction: 1998, pressure:8 t box opening:750 x 500 mm box depth:450 mm material:Pappe,Plaste - cardboard Feed opening:690 x 500 mm voltage:230 / 50 V / Hz transport measurements machine:900 x 600 x 2150 mm Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm Pedpfx Aeufudwegkopu

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. Ppodpfx Agovq Rtkokou The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: excellent (used), Year of construction: 2018, Baler, Bramidan B20 - second-hand - : Price ex location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical raw material balers B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Pressing force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Motor (kW) 4.0 Cycle time average (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of tie-downs 4 Type of strapping Strap Finished bale light Yes Bale ejection Automatic The classic among raw material balers The B20 is versatile and is used everywhere. The recyclable materials must be "dry & soft". Particularly suitable for raw materials such as cardboard, paper, cardboard packaging (PPK) and film. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 high on one; enormous space saving. Simple bale strapping Automatic bale ejection Short cycle time thanks to high speed Strap rollers mounted on the front allow installation directly on the wall Pallet-sized bales that can be stored outdoors under cover 3xx230x-440 4kW Amps: 25/16 dB 62-64 Condition: good - very good Ppedpfx Aerl I Ivogkju Available: immediately Location: 09116 Chemnitz

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Ppodpsxqdxcjfx Agkeu Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, Colour: Grey Empty weight: 500 kg Price: On request - Details: - └ Description: Set consisting of briquette press with extraction - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: 2012 1140 Podpfxjyy Rt Us Agkepu - Transport dimensions: 1200mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Pjdpfoym Uxtsx Agkopu Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes Ppjdpfx Aoyrtcuogkou - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Pedpjv Amw Nofx Agkjpu Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: good (used), weight 120 kg length 800 mm width 600 mm Pedpfey Aa I Tox Agkjpu height 330 mm Remaining stock of new and used milling cutters with bore, end mills, drills, dowel drills, inserts and various other cutters. Manufacturer: Leitz, Leuco, Oppold, and many more Interesting for every well-equipped sharpening room.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request. Podpozaqymefx Agkspu Transportation is also possible.

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Pjdpfx Agoyti Ipekopu

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz Podpfsv Ak Npex Agkepu - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 750 mm, bale height: 1,100 mm, bale weight: 550 kg, Equipment: documentation/manual, Automatic baler HSM VK 4812 The machine is maintained in perfect condition. The total operating hours are only 1950, and it has processed just 1314 bales of material. The machine was regularly serviced and has operated indoors in a warehouse since new. The baler has worked almost exclusively with non-abrasive material – textile offcuts. Key advantages of the unit: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle time → ideal for use with conveyor lines - Significantly superior to the 15–22 kW version when processing a high material stream Ppjdszb H E Ujpfx Agkju Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressing force: 58.2 N/cm² Volumetric throughput: up to 332 m³/h Practical weight throughput: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical (maximum) throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Filling opening: approx. 1020 × 1250 mm We also have other balers in stock. Transport costs depend on weight, volume, and most importantly, distance. When making inquiries, please provide the following details: Delivery address (postal code and town/city name). For further details and transport options please contact us by phone, as additional arrangements require direct contact. Our contact details are available in the seller's legal information. We sell and export worldwide; thanks to our extensive warehouse capacity, we can flexibly and quickly supply larger quantities as well. We issue intra-community invoices – VAT-free. Opening hours: Mon–Fri: 08:00–16:00 Sat: closed

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Pedsiuky Ijpfx Agkspu

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: Pal 1600, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1 pellet press brand: Paladin 1600-210 Ppjdpfx Agjq U R N Tskju inner diameter die 850 mm tread die 210 mm Press is equipped with 2 motors each 90 KW n=1500. Press door is made of stainless steel with overload valve in door. 3 Roll press with 3 rolls on the press overhauled in a drilled or racked version Press is complete with mold lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts and toothed belt. Also, all safeties will be observed and appropriate switches on Friction safety , door switch and inspection hatches will be fitted. Refurbished pump unit for friction and V-belt tensioning Remark: Conditioner on the press is optional

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760 Pedem Amk Nspfx Agkspu

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Psdpjh Dy Rfefx Agkspu Wide Range of Used Machinery, Industrial Equipment

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Podeic Rl Dspfx Agkopu The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Psdpfxjzbrxgo Agkepu We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Podpozazirjfx Agkopu Every inquiry or offer is tailored to the customer and their requirements.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Used Andritz Paladin 600B Psdpfsx N T Uasx Agkopu Incl. combined stainless steel feed auger and mixer, 2x 55kW motors, other motor options negotiable Interior inspected 2 years ago Includes frame for roller and die change

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. Ppedsy Ayiqopfx Agksu DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: ready for operation (used), YEAR OF MANUFACTURE 1993 380V 35A incl. wiring diagram 3,300 x 2,200 x 2,600mm (LWH) Podpeu Hz Stsfx Agkspu Hopper 3,000 x 2,000 x 2,000mm (LWH)