Used Robots for sale (68)

Year of construction: 1991, operating hours: 18,100 h, Condition: excellent (used), machine/vehicle number: 1683268, Item number MA 1141 Manufacturer Cloos type Romat 76 S / Rotrol 16 /6 G Year of manufacture 1991 Machine-No. 1683268 control Cloos Rotrol 16 /6 G with manual control panel ( the control panel is new) weight [kg] 7000 Connected load 380V Operating hours [h] 18100 Equipment The robot is still under power and in operation. It is equipped with a Mag welding source Cloos GLC 353 MC 3 R pulsed and a Tig welding source Cloos GLW 250 I-H. Duelil Rsh Rmrgjrqjt Accessories manuals / 3 servo controllers were renewed

Condition: used, Welding cell with 6-axis industrial robot FANUC ARC Mate Robot welding system with 2 welding stations SPS - Soudage Production Services type Cellule Junior - AIR LIQUIDE Serial. No. M 2075 Year of construction 2004 Dslil Reqa Txuerqeut Without welding power source, without welding torch - Control Fanuc R-J3IB MATE type A05B-2443-B250 - Teach panel Fanuc A05B-2301-C335 - Control cabinet PLC with welding unit Interface Fronius ROB 5000 OC - 6-axis industrial robot FANUC ARC Mate 50i B 3L Robot arm reach 856 mm Movement speed: J1 140 °/s (2.44 rad/s) J2 150 °/s (2.62 rad/s) J3 160 °/s (2.79 rad/s) J4 400 °/s (6.98 rad/s) J5 330 °/s (5.76 rad/s) J6 480 °/s (8.38 rad/s) Movement range: J1 ±160° J2 +150° - 35° J3 +165° - 125° J4 ±190° J5 ±120° J6 ±360° Robot payload 3 kg Weight of robot only 47 kg - The entire system is designed as a compact welding cell. - Robot control cabinet fixed to the welding cell - Pneumatic turntable, rotation angle 180°, Ø 1200 mm with partition wall - one half of the turntable can be upgraded parallel to the welding cycle. - BINZEL nozzle cleaning machine with spraying system for non-stick agents - Binzel Abicor CAT2 robot holder (three-dimensional shut-off protection) - Operating manual for FANUC R-J3iB control unit Mains connection 3 x 400 VAC, 50 Hz Space requirement L x W x H 2700 x 1600 x 2200 mm Weight of the welding cell approx. 870 kg Good condition

Condition: ready for operation (used), Year of construction: 2014, operating hours: 300 h, Functionality: fully functional, arm reach: 2,015 mm, load capacity: 8 kg, Little-used robot - approx. 300 operating hours TECHNICAL DETAILS Number of axes: 6 Load capacity: 8.0 kg Reach: 2015 mm Repeatability: 0.05 mm Controller: KUKA KRC4 Welding unit: FRONIUS Trans Puls Synergic 5000 CMT Axis 1: ±185° Axis 1 speed: 127°/s Axis 2: +35° / -155° Axis 2 speed: 130°/s Axis 3: +154° / -120° Axis 3 speed: 125°/s Axis 4: ±165° Axis 4 speed: 315°/s Axis 5: ±140° Axis 5 speed: 320°/s Axis 6: 360°, continuous Axis 6 speed: 680°/s Doliljuh T Iao Rrqout Total load: max. 40 kg Additional load arm: 12 kg Additional load articulated arm: none Additional load on rotating column: 20 kg Additional load base frame: none MACHINE DETAILS Weight: 238 kg

Year of construction: 2007, Condition: used, The MOTOMAN welding line is in good condition and has only worked about 100 working hours. Such a set is mostly used in the production of agricultural machinery – trailers, frames, axles. Made to order or assembled from standard products (except portal). The automatic welding station consists of: Station – HD Gantry HP6/EA1400N Positioner – HSB -10000SX Control unit – NX 100 Welding: Arc welding. MIG/MAG welding. Deliem Uc Igsl Rrqout Possibility of pulse cooking. The thickness of the wire used is 1 – 1.2 mm. The minimum seam height is 3mm. Maximum wire feed speed 25 m/min. Welding handle cooling function. Laser tracking: Seam search using laser sensors. It is used when changing the position of the seam. Possible deviation from the position of 5 mm. Increase in welding time by 30% and more (depending on the product). Seam fixation at min. 3mm for drop. Positioning: Positioner – HSB-10000SX The carrying capacity of the positioner is 10,000 kg The positioning accuracy of the robot arm is 0.0001 mm Dimensions of welded parts: Height/width – up to 3000 mm (including mounting hardware). Length – up to 6500 mm (including mounting equipment). Maximum weight – up to 3500 kg (limited by lifting equipment). Specifics of the parts that can be welded: Batches of high precision coupling parts. Long weld length. Large metal thicknesses min. 5 mm. Rigid product construction. When a consistent high-quality weld is required. High bending tolerance of parts. High tolerance of overall dimensions of parts. Welding inside the part – depth 110 mm. If you have more questions, we will be happy to answer them.

Condition: like new (used), Description of system area This is a pure component delivery Robot KR 8 R 1620 arc (HW) Djlileudb E Ej Rrqout The KR 8 R1620 arc HW industrial robot stands out in its class thanks to its high flexibility and long reach with optimum payload capacity. Furthermore, the robot was specially designed and developed for the welding process. - Nominal payload: 8 kg - Maximum reach: 1621 mm - Number of axes: 6 - Position repeatability (ISO 9283): ± 0.04 mm - Installation position: any angle, floor, ceiling, wall - Protection class (IEC 60529): IP54 - Degree of protection central hand (IEC 60529): IP54 - Hollow shaft The robot mechanics are supplied in the color R0000 KUKA Orange. The color of the base frame differs depending on the robot model (exception: KR 3 AGILUS and KR AGILUS-2, delivered with grey base frame). Linear unit KL 250-3 1CA (carrier length = 8m/ stroke = 7.1m) -further data on request-

Condition: excellent (used), Year of construction: 2013, operating hours: 10,000 h, Functionality: fully functional, arm reach: 350 mm, type of input current: three-phase, total height: 4,000 mm, total width: 6,260 mm, total length: 76,950 mm, workpiece weight (max.): 500 kg, Cloos Romat 350 C-30 2200mm 1 Romat 350 with control PHG with touchscreen Software V7.13 16 Dig. I/O USB Software extensions: Taktile sensor, arc seam tracking, multi-layer technology Welding equipment: Duelil Rstwnqkorqst Quinto II Puls 400/600 A Connection package, ground cable Holder for 300 mm wire reel Hose package 4 m Collision protection Welding gun MRW 380 incl. straightening gauge Mechanical cleaning CMR-6 Robot periphery: VWR3DP 2500N consisting of WPH-DP-20000N H-frame including base frame. Station change time 4 sec. Manipulators: Permitted weight 500 kg Clamping length 2200 mm Swing radius 700 mm +/- 180 degrees Safety: Robot standstill monitoring Connection control 1 Light curtain 1 Start preselection button 1 Rotating partition wall CMR 6 gun cleaning Documentation, CE declaration

Condition: new, Functionality: fully functional, carefree package for your welding automation. Whether MIG-MAG or TIG. Would you like to automate your welding production with a cobot to master your challenges? Then the Lorch Cobot Welding Solutions are just right for you! The perfectly coordinated package combines - high-quality robot technology from the cobot market leader Universal - innovative welding technology from Lorch - intuitive Lorch Cobotronic operating software Duelil Reruml Serqst - and a comprehensive range of services with the best professional support. This makes the Lorch Cobot Welding Solutions a truly all-inclusive package - available for highly efficient MIG-MAG applications as well as for highly demanding TIG welding tasks. THE COBOT: EASY TO INTEGRATE INTO YOUR WORK PROCESSES. Thanks to lightweight construction technology and integrated safety solutions, cobots can be used in direct interaction with humans. With the Lorch Cobot Welding Solutions, you get a first-class collaborative welding robot with a generous reach, sufficient payload, low-maintenance engineering and sophisticated technology. That's what's inside: SIMPLE OPERATION. Thanks to the touch display and intuitive user interface, the Cobot becomes a self-explanatory automation tool for your employees. HIGH PRODUCTIVITY. The basics of cobot welding are quickly understood - a two-day training course teaches everything about commissioning, operation and welding functions. SIMPLE PROGRAMMING. With the free-drive function, the cobot is shown by hand where it should weld - including intermediate waypoints and sections. UNIQUE SOFTWARE FOR MAXIMUM CONVENIENCE AND EFFICIENCY. Lorch Cobotronic makes the difference. What sets Lorch Cobot Welding Solutions apart from other cobot solutions is the optimized software. It has been perfectly adapted to the welding technology by our experienced welding experts - to increase the efficiency of your production through maximum user-friendliness and intuitive handling. The multi-talented Cobot UR10e. - 1,300 mm working radius - 12.5 kg payload - Very small footprint - short amortization time - Numerous plug & play accessories - Power source: Lorch S5 RoboMIG XT or Lorch V30 RoboTIG AC/DC Spot repetition accuracy: 0.05 mm Degrees of freedom: 6 +/- Joint rotation: 360 Mains voltage: 230 V OPTIONAL: THE PERFECT ADDITION: The Cobot Turn 100 A rotary tilting table always ensures the optimum welding position during cobot welding. The exact positioning can be specified for each weld seam in the program sequence. This leads to an increase in quality, a gain in productivity, more flexibility and saves valuable time - even for demanding welding tasks and circumferential seams. MORE WORKING SPACE AND MAXIMUM FREEDOM: The Cobot Move linear axis is THE addition to further increase the working space of the cobot. The Cobot remains highly precise - this is ensured by the high-quality ball screw drive installed in the linear axis Move, so that the welding quality remains constant across the entire working area. the autopilot for cobot welding: Whereas with conventional programming, all paths must first be specified and then followed by the Cobot, the Cobot SeamPilot finds its own way.

Condition: used, Automatic nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding systems BINZEL Type BRS Ident. No.: 8310260 Device no.: 4212 Year of manufacture: 1998 Welding nozzle dirt cutter for robots with gas-shielded welding unit Operating voltage: 24 Volt DC/direct voltage Cutter diameter inside: 8 mm Cutter diameter outside: 12 mm Stroke movement: 50 mm Pneumatic compressed air connection: 6 to 8 bar - Milling drive via compressed air motor (Desoutter) - Pneumatic cutter feed movement (stroke movement) Duslslcfnkeil Rrqet - Replaceable cleaning cutter - Gas nozzle fixation via pneumatic prism clamp Space requirement: L x W x H 240 x 230 x 380 mm Own weight: 8 kg good condition The automatic milling machine for single-wire welding torches comes from a robot welding cell and worked without any problems until it was dismantled.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: KC1200-Nr.305473, Kaltenbach Cutting Robot Unit : KC 1200 with Kuka Robot + Transportation Unit T13 / M150 - Year : 2010 Roller Track Feeding : total ca. 17,50 m / built-on ca. 13,50 m Cross Conveyor Feeding : Framework / Electronic built-in in Electronic Cabinet Roller Track Carriage : total ca. 17,50 m / built-on ca. 10,00 m Cross Conveyor : Framework / Electronicbuilt-in in Electronic Cabinet Security Fence : ca. 36,00 m Security Photo-Electric Guard Dueljk Tzxqjil Rrqot

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, Functionality: fully functional, arm reach: 1,300 mm, The perfect package for your welding automation with the very latest UR10e robot series - please do not buy any more CB series. Would you like to automate your welding shop with a cobot to master your future challenges? Then the OH-au2mate Cobot Welding Solutions with Lorch power source is just right for you! The perfectly coordinated package combines - high-quality robot technology from the cobot market leader Universal Dujlil Rrjt S U Auoqjt - innovative welding technology from Lorch - intuitive operating software Exact contents of the package: UR10e robot welding machine, operating elements, torch holder, Translas 8XR extraction torch, Lorch S5 power source with 400A.

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 2021300785, arm reach: 1,300 mm, load capacity: 10 kg, input voltage: 400 V, type of cooling: water, hose package length: 3,500 mm, protection type (IP code): IP54, working range: 1,000 mm, Lorch welding cobot, Lorch Welding Package UR 10 CB, incl. Lorch pulse welding system S5 SpeedPulse XT RoboMIg FullProcess, with TBI PushPull torch TBI PP2R, length 3.5 mtr. and multifunctional flange Exhibit, year of manufacture cobot and welding system both 2021 The welding machine can also be used for manual welding. Welding machine incl. Lorch Speed special programs SpeedPulse XT, SpeedArc XT, SpeedRoot, SpeedUp, SpeedCold The Cobot's Freedrive can be triggered via the multifunctional flange or the foot switch. Djlil Rrot Sk Aqsqout

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 449607-1-1, type of input current: AC, With E-Learning Lorch ArcWorld RS Mini Package includes: ArcWorld RS Mini cell Lorch S5 RM-XT B/W welding machine (ArcWorld) * Position has the following configuration: Yasakawa ArcWorld version Unit system SI unit, mm Power source variant Power source with 1 case Characteristics System Full process Pulse process SpeedPulse + SpeedPulse XT process Synergic process + SpeedArc XT SpeedArc additional process Additional process SpeedCold Additional process SpeedRoot Additional process Speed-TwinPulse + TwinPulse XT Additional process SpeedUp Additional process TwinPuls Water cooling Extended water cooling without Operation Control panel in power source Case RF-06 (Euro-ZA) DV castors Case 1.0/1.2 mm steel Robot holder Case YASKAWA ArcWorld Wire guide connection Case Quick release coupling Wire feed without Wire feed without Duelil Rrst Dzxyjqet Additional plug for torch control cable Intermediate hose package standard 5m Intermediate hose pack cross-section 70 mm² Intermediate hosepack holder without Robot interface Ethernet/IP Cable for robot control EtherNet, 5m LorchNet rear LorchNet front Chassis / base feet for ArcWorld cell Mains connection with plug Length of mains cable Standard Dust filter Dust filter fleece Language setting Operation DE - German Language Documentation Multilingual Standard packaging Torch cleaning station TCS-D with wire cutter Workpiece cable 95 mm², 4 m, cable lug M12 Hose package, consisting of: Torch neck LMR 2 - TN 6 CTC W, 45° LMR 2 - HP 10-W (CR) package, 1.50 m Starter set Accessories

Condition: like new (used), Year of construction: 2018, POWER-CAM/SHR SERVO-ROBOT SeamTracking set for robotic welding. SERVO-ROBOT is the leading manufacturer of 3D Robot-Vision systems and software dedicated to real-time intelligent control and monitoring of industrial robots. SERVO-ROBOT’s systems are used to perform 3D joint tracking, robotic inspection, intelligent process control and monitoring in applications such as robotic arc and laser welding, laser brazing and robotic dispensing in various fields. Shipping to EU countries is our responsibility and the shipping cost is free. Dolil Rrorfuc Aoqeut

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, welding robot fully equip Dslilsrl S Ufo Rrqeut vertical bend arm robot - with 6 axes - reach: 1525 mm - with automat welding gun, type: DIX MALZ 520 - with wire feed device, manufacturer: FRONIUS, type:ROB.VR1500 DINSE-ZA - with 2 welding working tables (rotary table) - plate dimensions: each 1200 x 750 mm - with pneumatic driven cleaning device - with positioning straightening station for torch - with current source, manufacturer: FRONIUS, type: welding device TPS 4000 - with technical documentation - attention: the machine can be transported on a standard truck Technical attributes dimensions (l x w x h) approx. 4700 x 3500 x 3800 mm weight approx. 5000 kg year of construction 2000

Condition: used, Year of construction: 2010, Functionality: fully functional, Complete welding station - robot, Beckhoff control, ESAB/PEMA 40 TAW rollers, Fronius TransPlus Synergic 5000 For more details please e-mail us. Deliju Sqfmjl Rrqsut

Condition: excellent (used), Year of construction: 2015, operating hours: 6,616 h, Functionality: fully functional, machine/vehicle number: 101611/301766, type of input current: AC, Routinely maintained welding robot for sale due to lack of use. Duolijt Dk Drjl Rrqot

Condition: refurbished (used), Year of construction: 2022, machine/vehicle number: M4502000050, Dimensions (WxDxH): 560x600x1400 mm Print Envelope (WxDxH): 145x168x390 mm Weight: 250 kg Laser Type: 6 x 200 W direct diode lasers Laser Wavelength: 976 nm Total Laser Power: 1200W Power Input: 208/230 V single phase or 400 V three phase Power Consumption: 2-5 kW peak depending on selected options Process Control: Closed-loop, laser and wire modulation Enclosure: Laser-safe, sealed, controlled atmosphere Interface: USB, ethernet, wireless datalink Cooling: Active water-cooled chiller included Wire Materials: Compatible with a wide range of welding wires including stainless steels, mild steels, carbon steels, titanium alloys, inconel and tool steel. Wire Feedstock: Diameter: 0.8-1.2 mm Spool Type: BS300 The machine was delivered from Meltio Spain in September 2022 in Refurbished condition and has only been used for printing the calibration cube. It has been equiped with new laser fibers with thermistors which check the temperature of the laser fibers and protect from overheating especially in long print jobs and up to date chamber door/safety glass. Hot wire option offers increased print speed with a programmable power supply that preheats the material before it enters the melt pool. The Dual Wire option allows for the fast and automatic switching of materials within a print without cross-contamination. Simplify3D licence (V4.1.2) is included. Delil Reqi A Hxerqout

Condition: new, Year of construction: 2024, Functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base Duslorwwzyjil Rrqet • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg