Condition: good (used), Year of construction: 2010, space requirement length: 5,600 mm, space requirement width: 2,400 mm, space requirement height: 2,100 mm, High-gloss polishing machine / Surface polishing machine make Bauerrichter type ESR 1 Year of manufacture 2010 Completely checked and cleaned! Polishing machine with moving upper part (successor model to Bauerrichter SL 1) Working area approx. 1350 x 3000 mm passage height max. approx. 100 mm 1x polishing roller, inclined, with oscillation Polishing ring diameter: ø 400 mm Height and oscillation speed infinitely variable Quick clamping system for workpieces Fjlnsq Ebcme Uw Hdegb Feed infinitely variable (frequency controlled), Control via touch panel, Siemens control Functional principle: The high gloss polishing machine Bauerrichter type ESR 1 is a surface polishing machine in which the workpieces are clamped on a work table and polished on the top side by the automatically moving unit. With this machine, the polishing agent is applied / sprayed on by hand before the automatic work sequence starts. Wrinkle polishing rings or shaft polishing rings are used as polishing tools, which are arranged next to each other on a spindle so that a roller is formed. Total power approx. 14 kW Dimensions approx. 5600 x 2400 x 2100 mm (LxWxH) Weight approx. 3000 kg

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment Foln Uw Hogr Er Sodegb spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 1996, Max working width : 1300 mm Stand in line machine ( Fixed table hight : 880 mm ) 1. Rubber drum ( Score 70-80 ) 2. Electronic Segmented pad 3. Disk unit with 8 rotating disks ( diameter 250mm ) Sanding paper : 2620 x 1350 mm Total Kw : 57 Total Amp : 110 Weight : 6100 Kg Fgolov Edhwsn Uw Hdob

Condition: good (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: SA / 004174, working width: 1,350 mm, overall weight: 2,500 kg, height adjustment type: electric, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, motor voltage: 400 V, frequency: 50 Hz, Machine with a longitudinal sanding belt, suitable for lacquer sanding. Equipped with brush roller and electronic sectioned pad. Vacuum in the table and carpet. Feln Uougn Dmsw Hdogb

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, total width: 1,780 mm, total height: 2,100 mm, total length: 1,900 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,300 kg, grinding height: 160 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 160 mm, SAC Concept 1100 R+R Wide Belt Sander Specification: • condition - used, after inspection and calibration • manufacturer - SAC • model - Concept 1100 R+R • working width - 1100mm • max working height - 160 mm • 2 sanding units: - first calibrating shaft, made of hard rubber - fi 180 mm - second shaft for final sanding, made of soft rubber - fi 220 mm • 15 kW main engine • 2 conveyor speeds • electronic indicator of the thickness of the sanded element • oscillation on photocells • conveyor in good condition • tabletop extension rollers • electric up/down adjustment • sanded material thickness meter • control panel informing about possible errors • original painting • sanding belt size - 2200x1120 mm • weight - 1 300 kg • year of manufacture - 2001 • dimensions 190 x 178 x 210 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site Fgjln Uwsv Nwr Ro Hdsb

Condition: used, Year of construction: 1994, from training workshop fully equipped with vacuum clamping pneum. shoe pressure and sanding shoe suction used, top equipment, top condition Make Johannsen Type T 95 Year of manufacture 1994 Mach. no. 20502 GS-tested Motor 5.5 kW Grinding length approx. 2700 mm Grinding width approx. 950 mm Belt length approx. 7800 mm x 150 mm Table size approx. 2780 mm x 950 mm Right offset approx. 550 mm Left offset approx. 550 mm Electric adjustment Upper belt cover Upper grinding support Table lighting Pneumatic grinding shoe pressure Pneumatic belt tension Vacuum clamping device with pump 1 and 5 suction plates 0.55 kW Right-left rotation Belt blow-out Grinding shoe 300 mm x 140 mm with suction New price approx. 15,000.00 EUR Suction connection D 80 / 120 / 140 mm Space requirement approx. 4000 mm x 1600 mm x 1600 mm Total connected load approx. 5.7 kW + 0.55 kW pump Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty Fgeln Uwjv Hhuke Hdjb

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2007.10.191, with Heesemann dust extraction machine, type: EA 8 Grinding width: 1350 mm Workpiece height: 3 – 150 mm Units: 3 x cross grinding units, each 15 kW; 1 x longitudinal grinding unit with pressure lamella belt 15 kW; 1 x brush roller unit 0.75 kW; Total power connection: approx. 80 kW Total air requirement: 193.5 m³/min Feln Uwov Enzus Hdogb

Condition: new, Equipped with a belt grinding tool it enables the clean, ready-to-cut finish of eight different, quickly adjustable radii by means of an oscillating sanding belt. The universal machine type RFM 320 S SET, equipped with an extra-­long machine table ensures time-saving complete machining of curved or chamfered edges in one operation. Base version RFM 320 S SET: Fgeln Usf E Nqdew Hdeb › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10 and 12.5 mm) › Chamfering equipment up to 16 mm depth (continuously) › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed unit › Suction connections Ø 80 mm inkl. premiling aggregate incl. wheels incl. pull- out table elongation Set-up dimensions approx. L x B x H in mm 1.300 x 690 x 1.010 Weight 145 kg

Condition: used, Year of construction: 2006, Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) Fgeln Uwev Ecy Sj Hdob - Combined sanding unit with switchable sanding sanding drum and sanding pad. Dqlu3Z - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - 1 pc. of UNI-BLOWER on outfeet side - 2 pc. of LIROS/SEOT 09 anti static units on outfeed side ( top/bottum )

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Felnevkdqij Uw Hdjgb Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: used, Löwer type LS 200 strip sanding machine for sanding strips or other flat workpieces with oscillation and conveyor belt for feeding. Fjln Usvt A Rmew Hdsgb working width: 200 mm working height: 120 mm

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Fgeln Uw Houynnuodjb

Condition: good (used), Year of construction: 1986, Table dimensions 2800 x 950 mm throat 550 x 310 mm mm Fgjljuqduqjn Uw Hdjb motor power 6,6 kw sanding belt measurements 150 x 7800 mm mm Working width 1000 mm Motor output kW Length of sanding paper mm Dust suction hood 180 mm

Condition: good (used), Super combi belt sander PN -sanding width 30cm Feln Uwov Hgige Hdjgb -manual table lifting -digital display of grinding thickness -max grinding height 20cm -combi aggregate, -2 feed speeds -main engine 5.5kW,

Condition: used, Year of construction: 1989, TECHNICAL DATA - max. workpiece height 100mm - max. workpiece width 1000mm - min. workpiece width 500mm - top unit 6 brushes - top/bottom adjustable unit - Helicopter rotating system - 2 types of brush rotation speeds - smooth adjustment of belt feed speed - belt feed 1.5kW Fjln Uw Hsv D Ddiedogb - 4kW motor - diameter of the exhaust port 180mm, 200mm - total dimensions length/width/height 1630x1840x2200mm - 6 Extra FLEXITRIM Fladder heads included - Vacuum fan 5,5 Kw - weight 980kg

Condition: like new (used), Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Fgjln Uwshqwf Te Hdeb Shoe unit: yes, Elektronik control : yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: A51227GM1, input current: 118 A, input voltage: 400 V, motor voltage: 50 V, COSTA veneer sander. The working width is 350 mm. The price we are interested in is 20 000 EUR. If interested, please contact me directly by e-mail. Fjlnsu Thw Es Uw Hdegb

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear. Feln Uw Hotdpa Uedogb

Condition: good (used), Year of construction: 1987, Working width 1100 mm Number of sanding units 1 st. Workpiece thickness max. 150 mm Fjln Usvnwcmew Hdsgb sanding belt measurements mm Motor roller 11 kW Motor pad kW Feed motor 1,5 kW Feed speed m/min. Overall size mm Weight 2250 kg

Condition: like new (used), - Working width: 300 mm Fjljvwcd Isn Uw Hdegb - Working height: 200 mm - Pneumatic oscillation - 1st unit: Rubber roller - 2nd unit: Pad - Star/Delta start-up - Electric feed - Manual table height adjustment - Main motor power: 5.5 kW - Feed motor power: 0.75 kW - Weight: 750 kg - Abrasive paper dimensions: 1910 x 300 mm

Year of construction: 1995, Condition: excellent (used), Wide-belt sander OTT ALPHA 110 ATR11 - German production - year of production 1995 - segment shoe - a perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combi unit with task-controlled membrane sanding shoe: engine power of the aggregate 11 kW blowing on the tape pneumatic oscillation two types of belt speed 4.5 and 18 m / s Felt shaft aggregate, with oscillation: engine power 0.75 kW shaft oscillation Aggregate with a cleaning brush: engine power 0.75 kW smoothly regulated feed feed speed range 4-18 m / min 1.5 kW feed motor power electric height adjustment vacum table fan motor power 3 kW Fgoln Uw Hoh Tna Asdob stub diameters 4 x 120 mm, 1 x 150 mm transport dimensions (length / width / height) 210/250/220 cm weight 2500 kg - The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 140 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm. - EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. - The control of the individual sections of the shoes adjacent to each other is possible in the range -2 to +4.

Condition: like new (used), DESCRIPTION Max workpiece width, mm: 1150 Max thickness of the workpiece, mm: 120 Feed rate, m / min: 5-20 Overall dimensions, mm: 5000х3000х2800 Power, kW: 139 Weight, kg: 11000 Machine for bottom grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe, Machine for top grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Fgoln Uw Hehm E Ixodsb Working unit 3. Sanding shoe

Year of construction: 1987, Condition: good (used), machine/vehicle number: 17/4, usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table can be tilted down/up to: 45/30° Table height above floor: 950 mm Fgolnoit N Ipj Uw Hdeb Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

Condition: excellent (used), Year of construction: 1990, operating hours: 600 h, Functionality: fully functional, machine/vehicle number: 18738, table length: 2,800 mm, table width: 950 mm, total width: 3,880 mm, total height: 1,310 mm, total length: 1,510 mm, height adjustment type: electric, table height adjustment: 220 mm, grinding belt length: 7,800 mm, grinding belt width: 150 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, worktable length: 2,800 mm, worktable width: 950 mm, type of input current: three-phase, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good Foln Ueugvxxew Hdegb

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: SA/006059, feed length X-axis: 1,350 mm, overall weight: 3,260 kg, Robust contact sander with 3 rollers, 1350 mm wide Fgjln Usvnz Rbew Hdsb