Year of construction: 1999, condition: excellent (used), 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min Gjdsxtwwkjpfx Ad Deui 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, Year of construction: 2005, operating hours: 18,000 h, machine/vehicle number: RUW 1703, Year of manufacture: 2005 Machine number: 1703 Track, m: 2,75 Gujdpfx Asmzawqjd Dei Crane type: ASX II Reach: 13,0 m Lifting capacity without grab: 1.250 kg / 13,0 m Grab: included Crane arrangement: center cabin side: left at crane column !! Sale by customer order !!!

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Guodpfx Adepbbmlo Doi

Condition: used, functionality: fully functional, Celma milling machine Bruks RR1000. In full working condition. Gujdpfx Adjxu Du Ej Doi

Year of construction: 2003, condition: good (used), Sorting line with 23 pockets and wood chipper Gsdjxuh Sbspfx Ad Doui

Condition: like new (used), Used belt conveyor in good condition Gsdpfxefh Inwo Ad Deui

Year of construction: 1999, condition: excellent (used), 1. Linck FWK Quick Clamp Carriage Gauge: 900 mm Gsdpfx Adjxtwv Ts Deui Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Saw stroke: 600 mm 3. Removal Device Bm 1/Mbh 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Various tools Sale by customer order.

Condition: used, Power 22kW Electric Gujdpfx Asxu Atted Dji Power Supply: 400V/50Hz, 3Ph Blade Length 4.98m Width 38mm Blade Wheel Diameter 635mm Type Belted Cast Steel Cutting Capacity Length 6.50m Length (with Board Removal) 6.30m Diameter 910mm Max. Clamp Width (from stop block) 660mm Min. Clamp Width (from stop block) 50mm Max. Throat Width (guide to guide) 830mm Max. Cant Width (outer guide to stop block) 740mm Max. Cutting Depth 61cm wide 130mm Max. Cutting Depth 56cm wide 330mm Dimensions & Requirements Length (bed only) 8.80m Length (with cab) 10.50m Width (machine only) 3m Width (with cable boom) 4.87m - 6.10m Height (head only) 2.90m - 3.10m Height (with cable boom) 3.40m Bed Height 790mm Weight 3800kg - 4250kg Shop Air Supply 110psi Dust Collection Port 150mm Hydraulic System Hydraulic Output 23 - 34 LPM Motor 5.5kW - 7.5kW

Year of construction: 2000, condition: used, Brucks 100hp chipper Guodpfolxqilsx Ad Doi Input and output conveyor belt, hopper, sieve The machine is sold as is.

Condition: used, functionality: fully functional, Centre conveyor and additional rolls for the CAMBIO log peeler. Gusdpfx Adjvcl H As Doi

Condition: good (used), Cross chain separator conveyor 2 pieces Gujdpendir Rsfx Ad Doi Chain pairs 7 pieces Conveyor width ca. 5000 mm Working height ca. 1800 mm Fixed cross chain conveyor no 1 length ca 1000 mm Fixed cross chain conveyor no 2 length ca 500 mm Moving cross chain conveyors parts length ca. 500 mm Moving the separator parts with a hydraulic cylinders

Condition: ready for operation (used), functionality: fully functional, Heavy duty log yard hydraulic crane for correction logs in sawmill infeed, including log grapples Guedpfx Adeu Nzbye Dsi

Condition: used, Year of construction: 2010, operating hours: 22,248 h, functionality: fully functional, machine/vehicle number: 1802, arm reach: 13,300 mm, load capacity: 2,400 kg, track width: 3,000 mm, number of previous owners: 1, Equipment: cabin, crane, Year of manufacture: 2010 Machine number: 1802 Track width: 3.0 m Crane type: OBX IV Reach: 13.30 m Lifting capacity without grapple: 2,400 kg Godpfxexgfq Sj Ad Djui Grapple: included Crane position: In front of the cab Cab side: Left Saw: 1.3 m Alpha Counter Sale on behalf of customer

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW Godpfsnygvrjx Ad Doui 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: new, Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, Wood Cutting Line Mebor HTZ 1100 Pro + VR900 Gusdpfxsxp Uybs Ad Dei The line includes: 1. Log Chain Conveyor – Four-arm version – MLD 2. Horizontal Band Saw Mebor HTZ 1100 PRO 3. Powered Roller Conveyor with Left–Right Sorting RC M 800, 9 m 4. Crosswise Bearing Arms 4 x 2 m 5. Edger Multi-Blade Saw VR 900, 55 kW 6. Powered Roller Conveyor with Left–Right Sorting RC M 800, 8 m 7. Crosswise Chain Conveyor CCP – M 4 x 3 m

Condition: refurbished (used), W2600/ L5800 / H- 2250 Gjdpfxjv Aygde Ad Deui

Year of construction: 2022, condition: used, Belt conveyor ca.12 m 5 kickers Kickers mowed with 1 piece hydraulic cylinder Motor 2.2 kW Guodpfx Aetpg Iked Dsi

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Guodpfjv Hwk Ujx Ad Dei Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, Year of construction: 2007, functionality: fully functional, Complete trimming line for model L 2.4 to 5.0 m. The description can be found in the attachment. A detailed technical specification can be provided upon request. The system is dismantled. Sale upon customer order. Gusdpfx Aextwvyod Doi

Year of construction: 2022, condition: new, Distance between cassettes minimum 450 mm and at the end 300 mm. Stick length 1000-1550 mm Gujdpfxsm Dtiue Ad Dji

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Gusdpou E Ezpsfx Ad Dei

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Godoxtwxbepfx Ad Djui

Condition: ready for operation (used), Root reducer Bruks RR. Used. Sale on behalf of customer. Guedpfx Adjxcidzs Dji

Condition: like new (used), Year of construction: 2023, As-new 508 m³ silo for wood chips or shavings. Included: cyclone, scraper conveyors, bucket conveyors, discharge mechanism, electrical control system. Sale on behalf of customer. Guodpjxcigiofx Ad Dei

Year of construction: 1993, condition: used, functionality: fully functional, Complete Möhringer MN 180/200 resaw line. Cutting height 180 mm. 4 adjustable saws. With infeed/outfeed. Used. Already dismantled. Good condition. Sale on behalf of customer. Gusdpfx Ajxcidnsd Dei