PA 1345

Dnepropress PA 1345

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Nwsdpfx Akevbcxtocsf Movie available

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Nwedpfx Asifkldjkcsf Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Nwsdpfju Eb Nisx Akcjf Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar

Year of construction: 1991, condition: not inspected (used), Uraca 624 pump Nwedpfx Akjh Tyd Hjcjf

Year of construction: 1986, condition: repair required (used), Uraca 624 pump, 520 bar 167 liters. Year of manufacture 1986. It has the valves for overhaul. Nwodpfxeh Tydxs Akcef

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Nwodpfx Asfhmuvskcjf Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Nwjdpfslqxg Hsx Akcsf Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Faceplate diameter: 1200 mm Nwodpfx Akotvv Sqocsf Swing diameter: 1400 mm Turning height: 1080 mm Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available

Condition: new, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton load capacity, available as a set or individually. Driven on both sides. The machine is offered as a synchronized set or as individual units. Protec turning/positioning device Syncrolift. Double column, wireless and manual hand remote control. Column adjustment electrically drivable in both directions. Load capacity 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available as a mono model (more economical). Nwjdewtq Dtjpfx Akcsf Optional with articulated flange (cardan flange).

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Nwodoubyrxopfx Akcjf Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.