Welding kit

Esab Esab LTG 150

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS Pjdpsvncfmsfx Abrjpw - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Ppodsw Rm Saspfx Abrjw Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable Pedpfsvncubox Abropw - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Podpfjvxa Dbex Abrjpw See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Ppedpfx Ajwx Hz Esbrjw Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Podpfx Abjd N E Rvorjpw Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Year of construction: 1987, condition: used, Gantry slewing single level-luffing jib crane constructed for 4-rope grab operation as well as hook operation Capacity grab operation approx. 8,0 to at an outreach of approx. 12,0 up to 25,0 m Capacity in hook operation max. approx. 12,5 t Lifting height above rails with jib approx. 25,0 m max. approx. 22,9 m Span original/actually approx. 6,0/5,2 m Psdpfx Aodlazgsbrepw Make TAKRAF/TEICHMANN Year of construction/complete overhaul - modernisation 1987/2005 Total weight only approx. 90,0 t Crane equipped with under ridable full-portal, intermediate column to increase the boom pivot point, complete enhousing of the top crane, modernisation with completely new electrics (FU control), cabin, control chair, motor-cabledrum and new painting in 2005 Working speeds: Main hoisting gear actually/optimized approx. 52,0/65,0 m/min Retracting gear approx. 35,0 s Slewing gear approx. 1,2/2,4 rpm Crane travel gear max. approx. 50,0 m/min

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Podpjy N T R Iefx Abrjpw Bar passage: 62 mm Main motor power: 5.5 HP Steadies included

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters Ppodpfoi E Izvex Abrow - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: used, overall weight: 25,000 kg, Year of construction: 2014, total length: 25,000 mm, total width: 2,500 mm, total height: 2,500 mm, Crane Serial Number: 111-005468Load CapacityMain Hoist: 50,000 kgAuxiliary Hoist: 25,000 kgCraneDesign: Double-girder bridge craneHoist Class: HC3Control: Radio remote controlOverload protection availableLoad Indicator System LIS-SVIntegrated load collective memoryHoist 1Load Capacity: 50 tType: GM6000.50000LLifting Speed: 0.7 / 4 m/minHook Path: 10,000 mmHoist 2Load Capacity: 25 tType: GM6000.25000LLifting Speed: 0.7 / 4 m/minHook Path: 10,000 mmTrolleysTroll ey Travel Speed: 5 / 20 m/minTrolley Track: 3,500 mmElectrical DataOperating Voltage: 400 V / 50 HzEquipmentRadi o remote controlLoad displayOverload cut-offLoad collective memoryUpper/lower limit switchesTrolley travel limit switchesDisc brakesElectric driveFully documentedConditionRegularly maintainedRecurring safety inspection availableInspection certificate Carl Stahl Süd availableLast documented inspection: 31.08.2021Inspection result: In orderScope of DeliveryComplete crane systemBridge crane2 electric trolleys (50 t + 25 t)Radio remote controlDocumentationInspection documents Weight approx.: 25,000 kg Dimensions (LxWxH) approx.: 25000 x 2500 x 2500 mm Year of construction: 2,014 Ppsdpfozg R Iiex Abrjw Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes