Inert gas welding machine 500 A

ESS 520-2 MW ESS DVK 17

Year of construction: 2000, condition: good (used), Equipment: Ljdpfx Aeumwn Asgzeak Unwind Guide system 1 Hot foil (or embossing) unit 1 Flexo unit 6 offset waterless printing units UV dryers 1 Hot foil (or embossing) unit 1 Embossing unit 1 Flat bed die cutting unit 1 Varnish unit - UV/IR Rewind

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m Lasdpegf H Saofx Agzek

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Lajdpfx Aoiffwqjgzek Hardened rolls Conical bending device Separate control panel Useful length : 1270 mm Top roller diameter : 130 mm Side rolls diameter : 130 mm Motors total power : 3,3 KW Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm Lasdpel R Nnnefx Agzek capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Lsdpotq Ha Tsfx Agzsak

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Lodpfx Agoxdwbkezoak Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: new, Year of construction: 2024, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg Ledpfxoq Sz Aho Agzjak 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: new, Year of construction: 2025, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Laodet D Azcjpfx Agzsk Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Lajdpfxet A A Aqo Agzok

Condition: ready for operation (used), Year of construction: 1993, Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible. Lsdpfx Aeuqndiegzeak