Parallel lathe 230 x 1500 mm

FERVI T075/400V3A

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Bwjdovzmtzjpfx An Ujr Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm Bedpolb I Daefx An Ujwr capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: used, Year of construction: 1999, throat 290 mm bore stroke 160 mm total power requirement 1,9 kW Description to follow! Bwodpfx Anow En D Us Usr

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing the surfaces of metal, stone, and concrete. Delivery to Germany/Austria. As a service provider in the field of surface treatment, we can offer you machines that meet your needs! Transportation costs: depend on your location and delivery conditions. Delivery: 4 weeks of working days after payment receipt by air freight. - Air freight: approximately 2 weeks. The equipment is NEW and is configured and adjusted according to customer requirements! The configuration and price depend on the customer's requirements and application area. We offer professional training in the use of the equipment in accordance with UAVA/UVV standards in Austria and Germany. As we are a service provider and work with the equipment, we can also guarantee that it functions properly. We offer comprehensive on-site training or in workshops/customer-oriented demonstrations. Payment: LEASING / FINANCING / PURCHASE Technical parameters: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser length: 1064nm or 1080nm ±5 Frequency: 10-50KHz Air or water cooling Net weight: approx. 170kg Size: 98 * 122 * 143 cm Scan width: 5-50 cm Functions: Handheld or automatic Operating temperature: 0-40°C Operating mode: CW Wavelength Nm: 1025-1070 Standard output power: 15KW Bjdpfx Astxlyron Uowr Laser beam quality mm*mrad: 4 Adjustable frequency Hz: 400 to 50000 Diameter of transmission fiber: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature °C: 5~35 GUARANTEED at the BEST PRICE!!! - RENT / LEASE / PURCHASE All equipment is exclusively assembled and delivered according to your requirements and our experience. - Demonstration - 24-hour support - Incl. maintenance & service & repair We also offer the following with the equipment: INDIVIDUAL training according to the UAVA/UVA safety regulations for the operation of laser machines for surface treatment. Safety-related consulting according to occupational/safety regulations for the use of laser equipment. Regular inspection of the safety regulations according to the applicable regulations.

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; Bjdelkgvbopfx An Uswr hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent a partial overhaul in 2024 for €15,000. The machine is equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 units, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm Bwodpfxowtqthe An Uor C-axis: 0 - 5 rpm X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connection value: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included Transportation and loading can be arranged across Europe at extra cost upon request. Prices plus VAT. Viewing by appointment is possible. Contact us—our team is happy to assist you. Trade-in or exchange possible! MACHINE PROCUREMENT / SALES PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 37 mm, turning diameter: 360 mm, center width: 750 mm, spindle speed (max.): 3,000 rpm, Visue Newall 2 axes Capacity: 750x360 mm Bwjdpfx Ajyimzvon Ujr Spindle bore: 37 mm Variable spindle speed up to a maximum of 3000 rpm

Condition: used, spindle bore: 51 mm, swing diameter over cross slide: 300 mm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 300 mm, Used lathe Brand: Amutio Cazeneuve Model: HB 575 Bwsdpfx Anjyzrhcs Uor Distance between centers: 1,000 mm Swing over bed: 575 mm Swing over carriage: 525 mm Swing over cross slide: 300 mm Spindle bore: 51 mm Speeds: 32–2500 rpm Power: 10 kW Bed width: 400 mm Includes: - 300 mm chuck with several sets of jaws - Closed steady rest - Quick-change tool post with 3 tool holders - Aurki digital readout (2 axes) - 2 live centers - Tray with coolant system

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: Bwedpfx Anjym Ut Do Uer * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest Bwsdpey Duy Hefx An Usr - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.