Tryout Press - hydraulic

HIDROLIKSAN HD 100

Condition: new, overall weight: 1,000 kg, pressing force: 100 t, stroke length: 400 mm, clearance between the columns: 1,010 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1010 mm - Electrically or manually operated Lhedpjr Ei Szofx Ab Tsd - pressure gauge - Emergency stop - 400V

Condition: new, table length 1200 mm table width 1200 mm Lhjdpfxepk Iv Uo Ab Tsd table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, distance between stands: 2,000 mm, stroke length: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 2000 mm - Electric or manual operation Lhsdpfx Abswbutuj Tjd - Pressure gauge - Emergency stop - 400 V

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1550 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Lhjdsvu E Uwjpfx Ab Tjd Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V Ledpfx Abeupxdqe Tehd weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Year of construction: 1994, condition: good (used), Manufacturer: Boge Tip: V LEX 45 Lhjdshtq Dvepfx Ab Tjd Engine: 45 kW Capacity: 6.5 m3 / min

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S Lhsdpfsr Ngp Uex Ab Ted -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Lsdpfxsfk Aive Ab Tehd

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. Ledpfx Ajun R N Asb Tohd 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: new, Year of construction: 2026, The CORMAK WS20 bench drill press is a professional column drill for metal, designed for drilling and tapping operations in industrial environments. Thanks to its robust construction, extended spindle stroke, and automatic tapping function, the machine delivers excellent performance and precision when machining metals, particularly structural steel. Key Advantages Tapping function with automatic reverse rotation – fast and safe thread cutting up to M16 in steel High structural rigidity – 85 mm diameter column and seasoned cast iron head, base, and table ensure stability and vibration damping 135 mm spindle stroke – enables deep drilling without repositioning the workpiece Belt drive system – five precisely selected speeds ranging from 280 to 1875 rpm Guards with limit switches – CE compliant, enhanced operator safety Large 360° rotating worktable with T-slots – flexible and secure workpiece clamping Design and Technology The CORMAK WS20 metal drill press is built from high-grade materials for durability and long service life. The spindle and transmission shafts are made of hardened steel to ensure wear resistance. The head, column, and table are manufactured from precisely machined seasoned castings, providing excellent rigidity of the entire structure. The MK2 Morse taper allows for quick tool changes and compatibility with a wide range of tooling. Precision and Performance Thanks to its rigid column, extended spindle travel, and refined belt transmission system, the machine ensures precise and repeatable drilling and tapping operations. The clear control panel simplifies operation, while the powerful 1.1 kW motor enables efficient machining even in more demanding materials. Applications The CORMAK WS20 column drill is ideal for use in: industrial plants mechanical workshops maintenance departments technical schools and training centers The machine is designed for drilling and tapping in steel, aluminum, and non-ferrous materials. Standard Equipment Keyed drill chuck Drift key for taper removal U-type spindle guard with safety limit switch Belt drive cover with limit switch Technical Specifications Parameter Value Max. drilling diameter (steel) 20 mm Max. tapping diameter (steel) M16 Lhjdpjrif Trsfx Ab Tsd Spindle stroke 135 mm Spindle taper MK2 Speed range 280–1875 rpm Number of speeds 5 Column diameter 85 mm Column wall thickness 12.7 mm Spindle–column distance 260 mm Spindle–table distance 366 mm Spindle–base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm