Plasma cutting machine

MicroStep

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Ijdpfx Ahox I Ehpoyjht Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Isdpfx Ahok R T Nmsyoht

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: MicroStep, This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information. Additional equipment • 4kW IPG YLS laser source Ihsdpfx Asyaiy Sohyet • Donaldson extraction and filtration equipment • Automatic layout planning software for flat sheets Machine Benefits Technical Machine Benefits • 3m x 1. 5m cutting table with hydraulic pallet changer • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information. Additional equipment • Donaldson extraction and filtration equipment • Automatic layout planning software for flat sheets • Tube cutting layout planning software Isdpfeyaiy Eox Ahyeht Machine Benefits Technical Machine Benefits • 4m x 2m cutting table with hydraulic pallet changer • Automatic feeding tube cutting system, up to 200mm diameter and 6m tube length • 4kw ipg yls laser source • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm Ihedpfof Ncadex Ahyjt track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: good (used), Year of construction: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC Control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical details: 1x oxy-fuel torch (fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transfer iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for programming directly at the machine control Module macro library “AsperWin Select” Module NC simulator “AsperWin NC-Sim” Module “Plasma Marking” (for scribing) via plasma source Module “THC” / automatic height control via arc voltage USB 2.0 connectivity for storage devices MicroStep® remote diagnostics module “iFDS Win” Remote maintenance access via TeamViewer Central gas manifold with proportional valves Parameter database for 1 torch Energy supply lines Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 piece capacitive height control IHT / for oxy-fuel 1 piece electric ignition unit RHÖNA-Acetylen Double-sided cable safety (collision protection) of the gantry bridge with emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker Isdpoudn Rzjfx Ahysht CNC interface for FineMarker / integration into CNC control Module for automatic operation of the marking device 160126ä

Condition: good (used), Year of construction: 2021, operating hours: 5,400 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, - Power source Hypertherm Powermax 65 - Piercing up to max. 16 mm - Needle marker - TEKA filter system Machine on: 5400 h Cutting times: 590 h Table size: 6000x2000 mm Permissible sheet thickness: up to 100 mm material thickness Ihsdpstlq Risfx Ahyst High-quality linear guides

Condition: used, Year of construction: 2004, The bending press is made in 2004 in Turkey, in the ERMAKSAN factory. The folding press is in good condition, sold with tools. The machines are connected and can be tested and inspected. Specification: Model. Year: 2004 Ihodpfx Aheq U Sdrsyjt Working length: 2600 mm Bending capacity: 80 T Axles: Y1-Y2-X Tools: Yes Weight: 5.5 T Motor: 7,5 kW If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2013, functionality: fully functional, Cutting range for steel: 1–38 mm Cutting range - x: 3000 mm Cutting range - y: 1500 mm Cutting medium: HiFocus 161i CNC control: MicroStep Total power requirement: 6 kA Approx. machine weight: 3,500 kg Description: MicroStep CNC guiding machine MasterCut Eco A Plus 3001.15 (3000 x 1500 mm) MicroStep® CNC control unit iMSNC with integrated network card - LCD operator panel mounted on the gantry - Laser pointer with automatic offset transfer - iMSNC control parameter database / Windows® - "AsperWin-Basic" programming system for direct programming at the machine control - "AsperWin Select" macro library module - "AsperWin NC-Sim" NC simulator module - "Plasma Marking" module (for center-punching) via plasma source - "THC" module / automatic height control via arc voltage - CNC oxy-fuel cutting table with sectional extraction / 3000 x 1500 mm - USB 2.0 interface for external storage devices - MicroStep® "iFDS Win" remote diagnostics module, remote maintenance access via TeamViewer - HiFocus 161i plasma source from KJELLBERG with automatic gas console and ContourCut Speed technology - Plasma torch connection (PBA) for HiFocus 161i, automatic gas console for HiFocus 161i / FlowControl - Module for controlling the automatic gas console HiFocus 161i - Marking module for HiFocus 161i - CNC interface for HiFocus 161i / integration with CNC control - Module for automatic current control for HiFocus 161i - Kemper extraction unit type 810800080 - Remote control of a Kemper filter system, incl. software activation Oxy-fuel: - 1 x oxy-fuel support Eco - Central gas control via proportional valves and parameter database for 1 torch - Power supply cables and gas hoses for heating oxygen, cutting oxygen, and acetylene - RHÖNA-FIT+ acetylene machine cutting torch (optionally also propane) - 1 tool set for oxy-fuel - 1 capacitive height control IHT (intelligent height control) for oxy-fuel technology - 1 electric ignition unit for RHÖNA acetylene - 1 x active collision protection - Standalone MMI control console - 1 x quick-change head for the PerCut 211 plasma torch - Initial set of consumables for Kjellberg® plasma source HiFocus 161i KAESER compressed air screw compressor Aircenter 8 and accessories for the central air supply of the complete MicroStep CNC plasma cutting system: - Aircenter 8 - ECO DRAIN Ihedjx Sqy Sopfx Ahyet - Condensate treatment system type: Aquamat CF 3

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m Isdpfx Ahsg N Nlveyeht MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge. Iedpfxetp Dhpj Ahyoht  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Iedewyaxmspfx Ahyjht Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: good (used), functionality: fully functional, Year of construction: 2016, 3D Laser Cutting Machine Manufacturer: MICROSTEP Model: MSF 4001.20Ltk+T500 4kW IPG Year of manufacture: 2016 2. Serial number: 2139/16 3. Machine status: fully functional 4. Year of manufacture/commissioning: 2016 Ijdpfx Asx N S Thehyjht 5. Specifications: Working area: 4000 x 2000 mm + space for tubes Guides: Rexroth linear guides Racks: ATLANTA precision helical racks on all axes, dual-sided gantry drive Gearboxes: STOBER Drives: Maintenance-free, processor-controlled AC servos by Panasonic Max. positioning speed: 130 m/min (single axis), 180 m/min (both axes simultaneously) Acceleration: 10 m/s² Z-axis positioning speed: 50 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Positioning deviation Pa: 0.07 mm according to VDI/DGQ 3441 Repeatability Ps: 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % 6. All accessories listed in the offer are included.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Isdpfxsrfx Utj Ahyeht Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, sheet thickness (max.): 200 mm, overall weight: 7,500 kg, input voltage: 400 V, cutting speed: 300 mm/min, cutting height (max.): 230 mm, table length: 13,975 mm, working width: 2,200 mm, table width: 2,200 mm, positioning accuracy: 0.5 mm, working length: 12,700 mm, 1 plasma & 1 gas (natural) torches 200 Amps Hypertherm HD4070 plasma source 1 owner throughout all service life Ihsdpfx Ahowltwajyet Good condition, still in operation Set of technical documentation (users + maintenance manuals) Filter unit GTV included Nesting program Asper license + PC included Assistance in dismantling, packing, loading (to be negotiated separately) Organizing of transportation to countries of the European Union (at separate quotation)