Used 280 Sx for sale (2,742)

Condition: used, Year of construction: 1993, functionality: fully functional, USED SEMI-AUTOMATIC SAW, VERTICAL DOWNWARD CUT, 60° RIGHT-LEFT CUT, size 1000x600, BIANCO BTM 100.60 right-left. 60° RIGHT-LEFT CUT, size 1000x600, MACHINE PRICE AS SEEN AND LIKED, NEEDS OVERHAUL. POSSIBILITY TO REFURBISH IT TO LIKE NEW. Rcodezhunvepfx Ab Rjh

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early model fire engine, second owner, which has never been used for civilian purposes. Vintage vehicle inspection (according to §23 StVZO for the allocation of an H-registration plate) passed recently. MOT valid until 09/2027 ("no defects found" at DEKRA). Year of manufacture 1981 / First registration month: 07-1981. Original, only 29,800 total kilometers driven. Only used for fire service up to now. Advanced emergency vehicle (VRW) with ZIEGLER body and Knurz-Kirsch generator with 5 kVA output. German-made, kept in a garage, with the original vehicle registration document (only 2 owners) and was registered until recently. The vehicle manufacturer listed in the original documents is GFG "Geländefahrzeug-Gesellschaft", which at the time was a joint production of Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles built with this manufacturer designation; shortly thereafter, "Daimler-Benz" was also listed as the vehicle manufacturer in the registration documents. A complete MATTER roll bar was installed in the vehicle in 1991 (properly registered in the documents). Included is a small roof rack system for transporting long equipment. The long 280 GE is the largest and most powerful of the first G-series, and is what could be ordered as standard from the factory as a Mercedes G-Class in the early years. The six-cylinder inline gasoline engine M110 with 2717 ccm and 115 kW/156 hp starts and runs well. 4-speed manual transmission plus locking differentials. Power steering. 155 km/h is listed as the maximum speed. Rsdjxthdzjpfx Ab Roch A side power take-off for operating the generator is also present. The vehicle was most recently used primarily to transport a portable fire pump with suction hoses and accessories. Therefore, there are no seats in the back, and it has a loading area like a truck. Unfortunately, no other seats are available besides the 2 front seats. According to the original documents, it is a "3-seater" and the type of registration is "Other motor vehicle, fire engine, advanced emergency vehicle VRW". The unladen weight is stated as 2360 kg. The permissible total weight (originally 2900 kg) was increased to 3030 kg in 1991, according to the entry in the vehicle documents. Therefore, this 280 GE currently has a payload of 670 kg. Overall vehicle dimensions: length 4395 mm / width 1700 mm / height 2150 mm. Tires 205/80R16 in good condition. Winter tires with the snowflake symbol according to current legal requirements are mounted (DOT 2018). Although the G does not have a trailer hitch, the necessary base frame is installed. Unfortunately, it is not possible to provide information on retrofitting/trailer load, as the corresponding fields for the trailer load in the original registration document are marked with "not applicable". According to the oral account of the last vehicle owner, the Mercedes has not been involved in any accidents, but this cannot be documented in writing and is therefore passed on to the buyer as "information". The 280 GE was driven a long distance on the highway to us, which it completed without any problems. A new battery has recently been installed, and the gear linkage has been newly fitted. The off-road vehicle is immediately available and is looking forward to new tasks. This offer is only valid for commercial enterprises, freelancers, authorities, emergency services, agriculture and forestry, and similar self-employed individuals. Sale to purely privat

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, load capacity: 280 kg, arm reach: 2,080 mm, controller manufacturer: KUKA, controller model: KRC4, The KUKA KR 280 R3080 Ultra is a high-performance 6-axis industrial robot from the QUANTEC series, offering a 280 kg payload capacity and a reach of 3080 mm. Designed for versatility, it excels in applications such as welding, material handling, palletizing, and machining. Its lightweight yet rigid construction ensures high precision, energy efficiency, and long-term reliability, even in demanding industrial environments. Frequently used in the following applications: Rcodpfx Abow Na N Ne Rsh - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR 280 R3080 Condition: Used Year: 2018 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00546, load capacity: 280 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280 manufactured in 2015.08. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Rcsdpe Aa Utmjfx Ab Rsh Model: M-900iB/280 Model Number: A05B-1335-B205 Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 2655 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1700   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: excellent (used), Year of construction: 2009, operating hours: 41,750 h, functionality: fully functional, clamping force: 2,800 kN, screw diameter: 55 mm, displacement volume: 404 cm³, Equipment: documentation/manual, Model: Engel Speed 280/55 Year: 2009 Screw diameter: 50 mm Injection volume: 404 ccm Screw speed: 340 rpm Injection rate: 1901 ccm/s Spec. injection pressure: 1390 bar Spec. injection pressure increased: 2025 bar Redpfoyzhy Uox Ab Rjch Nozzle stroke: 465 mm Clamping type: Toggle Working hours: approx. 41,750 h

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Rodpoznczdefx Ab Rjch Manufacturer: Böhl Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Machine weight: 950 kg Includes roller tables: 2 x 4 m

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Rcjdpfx Aboq U R T Nj Roh Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Rodpfx Ajq U Sa Ssb Rjch Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Year of construction: 1997, condition: used, Cutting speed copper/aluminum: 80m/min, structural steel/steel pipes: 65-85m/min, C45/comparable steels: 55-80m/min, C60/comparable steels: 55-65m/min, 34CrMo4: 40-60m/min, 42CrMo4: 40-55m/min, 10CrMo9-10: 30-50m/min, high-alloy steels: approx. 20-40m/min, connected load: 5kW, rated current: 16A, weight: 1.75t, an on-site inspection is possible. Redpj Adt Epjfx Ab Rsch

Condition: used, mileage: 270,500 km, power: 206 kW (280.08 HP), first registration: 12/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Equipment: ABS, tail-lift, Volvo FL-4x2R 280 truck, Wingliner with ZEPRO 2,000 kg tail lift, Euro 5, tire condition: approx. 40% on the first axle, approx. 60% on the second axle, wheelbase: 5,000 mm, unladen weight: 8,540 kg, Austrian truck, chassis number: YV2TBL0A37B4849, contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German), phone number available upon request. Subject to errors and prior sale! Rsdpfx Aj Af Dbwob Rsch

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING – Superstructure – FEDERAL Emulsion/Asphalt Spraying Unit Attention: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the driver’s cab! • Manual transmission • Differential lock • Long-distance cab • 1 sleeping berth • Leaf spring suspension • Tires: 12 R 22.5 (alternatively: 315 / 80 R 22.5) • Tank capacity: 6,000 liters of emulsion • Burner: NEW! • Spraying bar: 2 units, foldable! Errors and prior sale excepted! = Further information = Rcjdpfswmpcnjx Ab Rjh Fuel type: Diesel Year of manufacture: March 1979 Mileage: 67,000 km Usable material: Asphalt Damage: Damaged vehicle (not roadworthy)

Condition: reconditioned (used), functionality: fully functional, overall weight: 400 kg, USED SEMI-AUTOMATIC SAW WITH PNEUMATIC VISE, MEP SHARK 280, Redpoz H Ixpsfx Ab Rsch

Condition: good (used), Year of construction: 1990, Used semi-automatic bandsaw machine from MEP Model: Shark 310 SX Capacity: 310 mm Rcodpfx Ae Aaz Iksb Reh Two cutting speeds

Condition: excellent (used), mileage: 726,808 km, first registration: 10/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,600 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro5, total length: 9,550 mm, total width: 2,550 mm, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, central locking, cruise control, electric window regulation, spoiler, = Additional options and accessories = - Air suspension - Aluminum fuel tank - Roof Spoiler - Speed limiter - Sun visor = Remarks = Tail lift: DHOLLANDIA, 1500 kg YV2TBL0A09B532857 = More information = Year of construction: 2008 Number of cylinders: 6 Engine capacity: 7.146 cc Empty weight: 7.840 kg Carrying capacity: 4.150 kg GVW: 11.990 kg Technical condition: very good Visual appearance: very good Registration number: BV-ND-99 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Rsdpfxeymq Hgj Ab Roch Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Y-axis Rjdpfjzwhkisx Ab Rech Parts catcher Workpiece ejector Chip conveyor Various tool holders

Condition: used, Year of construction: 2014, CNC Lathe Manufacturer: GOODWAY Model: GS 280 Year of manufacture: 2014 Control system: FANUC Series Oi-TD Redpfx Aszvzaueb Rjch Technical details: Control system: FANUC Series Oi-TD Swing over bed: 670 mm Swing over carriage: 500 mm Max. turning diameter: 400 mm Max. turning length: 600 mm Spindle nose: A2-8 Spindle bore: 90 mm Front bearing diameter: 130 mm Spindle speed: 35 – 3,500 rpm Number of tool stations: 12 positions Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Rodpfow Ebpwjx Ab Roch Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: used, Year of construction: 2014, workpiece weight (max.): 25,000 kg, total length: 10,000 mm, total height: 6,000 mm, total width: 10,000 mm, overall weight: 60,000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertikaldrehmaschine Modernisierung: im Rahmen des Retrofits im Jahr 2014 auf Siemens SINUMERIK 840D SLArbeitsbereichTi schdurchmesser: 2.800 mm Max. Umlaufdurchmesser / Drehdurchmesser: 3.000 mm Max. Tischbelastung: 25.000 kg Max. Drehhöhe: ca. 2.100 mm Verfahrweg X-Achse: ±1.550 mm Verfahrweg Z-Achse / RAM-Hub: 1.500 mmHauptantrieb und SpindelnHauptantrieb: Siemens-Hauptmotor Antriebsleistung: 130 kW Rcodszmkzpepfx Ab Reh Max. Spindeldrehzahl: 4.500 min⁻¹ Betriebsart: S6, 40 %Ausstattung: 2 vertikale SpindelnWerkzeugwechsler und Peripherieo    2 automatische Werkzeugwechslero    Kühlschmierstoffanlageo    Späneförderero    Ölnebelabsaugungo    2 separate HydraulikaggregateBetriebsstunden: ca. 12.571 Stunden laut mechanischem Betriebsstundenzähler Table diameter: 2,800 mm Control: Siemens SINUMERIK 840D SL Component weight max.: 25,000 kg Swing: 3,000 mm Rotation height max.: 2,100 mm Weight approx.: 60,000 kg Dimensions (LxWxH) approx.: 10000 x 10000 x 6000 mm Year of construction: 2,014 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 1,600 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 127 mm, number of axes: 3, This 3-axis KNUTH Turnado 280/1500 was manufactured in 2018. It features a distance between centers of 1,420 mm and a swing over bed of 560 mm. The machine is equipped with a spindle speed range of 25 – 1,600 rpm and includes a 3-axis Digital Readout (DRO) and a quick change tool post. If you are looking to get high-quality turning capabilities, consider the KNUTH Turnado 280/1500 horizontal turning machine we have for sale. Contact us for further details. Technical specifications • Distance between centers: 1,420 mm • Swing over bed: 560 mm • Swing over cross slide: 360 mm Redpfxozgfqfo Ab Rech • Swing in gap: 790 mm • Gap length: 180 mm • Bed width: 350 mmTravels • Compound slide swivel: ±52°Spindle • Spindle nose: Camlock D1-8 • Spindle bore: 80 mm • Spindle taper: MT7 • Number of spindle speeds: 12Feed rates • Longitudinal feed: 0.059–1.646 mm/rev • Cross feed: 0.020–0.573 mm/revThread cutting • Metric threads: 0.2–14 mm (47 ranges) • Module threads: 0.1–7 mm (39 ranges) • Whitworth threads: 2–112 TPI (60 ranges) • Diametral pitch threads: 4–112 DP (50 ranges)Tailstock • Tailstock taper: MT5 • Tailstock quill diameter: 76 mm • Tailstock quill stroke: 180 mm • Tailstock offset adjustment: ±12 mmMachine data • Main motor power: 7.8 kW • Voltage: 400 V • Frequency: 50/60 Hz Additional equipment • 3-axis Digital Readout (DRO) • Quick Change Tool Post • Chip conveyor • Extensive standard tooling package Technical Specification Counter Spindle Yes Driven Tools No

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Rcjdpfswhk Iuox Ab Reh

Condition: used, Screw for PowerGrind 280 Redezzckropfx Ab Rech

Condition: ready for operation (used), Year of construction: 2022, number of ink cartridges: 4, We have Xerox Versant 280 and 180 printers available and ready for shipment. Xerox Versant 280 Integrated Fiery controller Counter: 800,000 OHCF cassette (2,000 sheets) Finisher with booklet maker We also have a Xerox Versant 180 available. Xerox Versant 180 Rodpfx Ajtiyqujb Rsch Versant 180 2,000-sheet feeder External Fiery controller Finisher with booklet maker Counter: 1.1 million For more information, please ask.

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities Redpfx Abezbidto Rjch • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: used, functionality: fully functional, OGAM PO 280 Multi-Blade Saw Track width: 300mm Maximum working height: 120mm Maximum blade diameter: 350mm Manual adjustment of the arbor (up/down) Rcjdpfxezntxtj Ab Reh Manual adjustment of the pressure pads

Condition: used, Screw for PowerGrind 280 Rsdpszzciusfx Ab Rjch